Электроинструменты и аккумуляторные инструменты, с

HSS metal drill bits, 3.0-10.0 mm, set of 8 pcs, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0 mm

GRAPHITE metal drill with 10.5 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.

Masonry drill GRAPHITE (ref no. 57H578) with SDS+ shank, diam 8.0 mm and crossed tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating.

Delta sanding paper GRAPHITE (ref. no. 55H766), size 93 x 93 mm and granulation K100. Dedicated to grinding wood, wood-based materials, metals and plastics. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system. Product with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Blade for reciprocating saw GRAPHITE about the length 228 mm and 3 with teeth an inch long intended for cutting, among others fiber-cement boards, cellular concrete, red brick, glass, fiberglass-reinforced plastics, epoxy resin, abrasives using saber saws. The maximum thickness of the materials is 175 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.

Sand belt GRAPHITE (ref. no. 55H787) with granulation K40 and size 75 x 457 mm. Dedicated to grinding wood, wood-based materials, metals and plastics. Product with X-cloth backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Sanding paper GRAPHITE (ref. no. 55H894) in a sheet with dimensions 230 x 280 mm and granulation 240. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Masonry drill VERTO (ref. no. 60H635) with SDS+ shank 10.0 mm diameter, tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

Saw and plunge-cutting circular saw blade, Widia GRAPHITE (ref. 55H685) with external diameter 160 mm, made from special C50 steel with increased resistance to abrasion and deformation. Tungsten carbide teeth with ATB geometry (alternate) allow precise cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.

Abrasive sponge GRAPHITE (ref. no. 55H915) with dimensions 70 x 25 x 10 mm and granulation 60. Designed for finish grinding. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on four sides of the sponge. Thanks to its soft structure, the sponge adapts perfectly to the shape of ground surfaces. The sponge can be cut into smaller pieces to process hard-to-reach areas. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Sand belt VERTO (ref. no.63H656) with dimensions 75 x 533 mm, in popular granulations K60, K80x2 pcs., K100x2 pcs., K120. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with X-cloth backing designed for mechanical grinding. The cloth’s open coating (50-60% of the cloth surface is covered with abrasive grain) guarantees greater resistance of the grain surface to clogging with abrasive dust. Designed for mounting on belt grinders. The VERTO brand offers a range of power tools and accessories for every DIY enthusiast.

Screwdriver bits with handle, set of 7 pieces

Sanding paper GRAPHITE (ref. no. 55H747) with dimensions 93 x 230 mm and granulation 40, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging . Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Sanding paper GRAPHITE (ref. no. 55H886) in a sheet with dimensions 230 x 280 mm and granulation 60. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Blade for reciprocating saw GRAPHITE about the length 228 mm and variable dentition 8/6 teeth per inch long intended for cutting, among others wood with nails, plastics, fiberglass-reinforced composites, epoxy resin, plasterboard, window frames, wood, metal, fiber cement boards using saber saws. The maximum thickness of the materials is 175 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.

Velcro sand paper GRAPHITE (ref. no. 55H950) with diameter 150 mm and granulation K150. Dedicated to grinding wood, wood-based materials, metals and plastics. Product with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. At the same time, processed surface does not heat excessively when sanding. Holes allow for nearly dust-free operation with tools equipped with dust extraction system. Velcro fastening allows quick replacement of used abrasive disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Sanding paper GRAPHITE (ref. no. 55H752) with dimensions 93 x 230 mm and granulation 180, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging . Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Water abrasive paper GRAPHITE (ref. no. 55H899) in a sheet with dimensions 230 x 280 mm and granulation 120. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

GRAPHITE screwdriver bit set includes the most popular sizes and types of bits 1/4" x 25 mm. Special storage box design allows to fix it on a tool belt as a bit clip. Access and replacing bits is considerably easier thanks to the system for picking and putting bits with one hand. Coloured sleeves for bit types allow to easy identify required bit.

GRAPHITE abrasive papers are used for rough sanding of wood and metal surfaces. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system.