Электроинструмент и ручной инструмент GRAPHITE в Hammerjack
Hammerjack — официальный импортёр продукции GRAPHITE. GRAPHITE — европейский бренд инструментов, предлагающий качественный электроинструмент, аккумуляторный инструмент и ручной инструмент для строительства, ремонта и монтажных работ. Продукция сочетает долговечность, удобство использования и отличное соотношение цены и качества.
В ассортимент входят аккумуляторные дрели, ударные дрели, угловые шлифмашины, электролобзики, циркулярные пилы, шлифовальные машины, многофункциональные инструменты, ручной инструмент и широкий выбор аксессуаров.
Инструменты для требовательных пользователей
Инструменты GRAPHITE обеспечивают надежную работу и длительный срок службы при выполнении строительных, монтажных и ремонтных работ.
Почему выбирают GRAPHITE?
Официальный импортёр продукции GRAPHITE.
Качественный электро- и аккумуляторный инструмент.
Широкий ассортимент ручного инструмента.
Надёжные и эргономичные решения.
Отличное соотношение цены и качества.
Надёжные инструменты для любых проектов
GRAPHITE предлагает надежные решения для строителей, монтажников, специалистов по обслуживанию и требовательных домашних мастеров.
Cutting disc, corundum for concrete 230 x 2 x 22.2 mm, 41 C46-R-BF, 57T117 by GRAPHITE is a tool designated type 41 C46-R-BF. The flat disc is characterised by a diameter of 230 mm, a thickness of 2 mm and a mounting hole diameter of 22.2 mm. It has been adapted to operate at a maximum speed of 6,600 rpm and an operating speed of 80 m/s. The product complies with EN 12413 and, being designed for cutting concrete, will work well in any do-it-yourself workshop.
Cutting wheel, alumina for metal 115 x 1 x 22.2 mm, 41 A60-T-BF, 57T105 by GRAPHITE is an alumina wheel that is designed for cutting metal. Its dimensions are 115 x 1.0 x 22.2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the disc is 1 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 13,300 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Cutting disc, alumina for concrete 125 x 2 x 22.2 mm, 41 C46-R-BF, 57T116 by GRAPHITE is a tool designated type 41 C46-R-BF. The flat disc is characterised by a diameter of 125 mm, a thickness of 2 mm and a mounting hole diameter of 22.2 mm. It has been adapted to operate at a maximum speed of 12,200 rpm and an operating speed of 80 m/s. The product complies with EN 12413 and is designed for cutting concrete and will work well in any do-it-yourself workshop.
GRAPHITE electric mixer with 1250W motor for mixing plaster, mortar or paint. The mixer, thanks to its robust construction and efficient heat dissipation system, is suitable for continuous operation in finishing work on medium-sized construction sites. The mixer has a possibility of regulating the rotational speed of the spindle. A properly shaped handle of the device allows comfortable and safe work for a long time. Also, for safety reasons, the mixer is equipped with a lock that prevents accidental turning on. The mixer comes with two stirrers, one mandrel and two spanners.
The HVPL Energy+ 18V spray gun (ref. 58GE103) with 243W operates with HVLP technology, which is highly efficient. The unit allows painting in three settings: vertical, horizontal and circular spray. The gun consists of two main parts: a gun with a 900ml tank and a drive unit with motor. The spray gun is equipped with a knob for regulating the paint flow rate and width of the stream, which ensures even paint distribution and streak-free painting. The spray gun ensures fast, comfortable and precise painting even in places inaccessible to a paintbrush or a roller. The kit includes additional accessories: a viscosity cup, nozzle, sealing ring, nozzle tip spanner and cleaning brush.
The GD021 children's tool case by GRAPHITE is a 25-piece toy for children over 3 years old. The set includes: suitcase 1x, screwdriver 1x, mask 1x, multifunction knife 1x, saw 1x, socket ratchet 1x, pliers 1x, hammer 1x, screws 4x, nuts 4x, bits 3x, fixing tapes x4, angle iron x1. Features a realistic appearance. It encourages DIY and stimulates children's creativity. The carrying case makes it easy to store and carry. The included screwdriver runs on batteries (not included) and functions with interchangeable bits and variable speed. It has a two-sided control button and a light indicator. The total net weight of the tool case is 400g. The GRAPHITE brand develops passion from an early age!
GRAPHITE metal cutting disc thanks to advanced design and reduced thickness allows to double cutting speed. Product is compliant with EN12413, which ensures high safety at work.
Cutting disc, corundum for metal 230 x 2 x 22,2 mm, 41 A46-S-BF, 57T112 by GRAPHITE is an alumina disc that is designed for cutting metal. Its dimensions are 230 x 2 x 22.2 mm. This model has a flat design and the designation 41 A46-S-BF. The thickness of the disc is 2 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 6,600 rpm, which corresponds to a speed of 80 m/s. The product complies with the EN 12413 standard.
The GRAPHITE 57T125 TCT blade for cutting wood with nails 125 x 1.2 x 22.22 mm is designed for cutting wood, wood with nails and plastics. The blade has a diameter of 125 mm, a thickness of 1.2 mm and a mounting hole of 22.2 mm. It has a maximum speed of 12,200 rpm and a maximum working speed of 80 m/s. The product is characterised by its compliance with EN 13236 and is designed for use in cutting tools that support this type of disc.
The 125 x 2.0 x 22.2 mm, 42 C46-R-BF, convex 57T122 corundum cutting disc for concrete by GRAPHITE is a convex disc with a diameter of 125 mm, a thickness of 2 mm and a mounting hole of 22.2 mm. It features a maximum speed of 12,200 rpm, with an operating speed of 80 m/s. The product is designed for cutting concrete. The GRAPHITE blade meets the requirements of EN 12413.
GRAPHITE metal cutting disc thanks to advanced design and reduced thickness allows to greatly reduce cutting time. Product is compliant with EN12413, which ensures high safety at work.
Cutting wheel, alumina for metal 180 x 1,6 x 22,2 mm, 41 A46-T-BF, 57T111 by GRAPHITE is an alumina wheel that is designed for cutting metal. Its dimensions are 180 x 1,6 x 22,2 mm. This model has a flat design and the designation 41 A46-T-BF. The thickness of the disc is 2 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 8,500 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
The 18 V Energy+ tile vibrator, without battery 58GE148 by GRAPHITE is a device with a foot size of 130 mm in diameter and has a maximum load capacity of up to 50 kg. The rechargeable suction cup supports a vibration frequency of 0-7500 /min-1 and has a multi-stage adjustment: min-1-2-3-4-5-max. It works exclusively with the ENERGY+ battery system, with batteries: 58G001-1, 58G004-1, 58G086-1, 58GE152. The operating time on the rechargeable batteries depends on the capacity used and is approx: 55, 110, 165, 230 (2-4-6-8 Ah, in min). The weight of the suction cup is 1.1 kg. The device is made of PA6GF30 reinforced fibre and TPE rubber. With its slim shape, adjustable speed and rubberised body, the tool will work well for compacting mortar, adjusting tiles during installation or handling ceramics, mirrors or glass panes.
Cutting wheel, alumina for metal 115 x 1,5 x 22,2 mm, 41 A60-T-BF, 57T106 by GRAPHITE is an alumina wheel that is designed for cutting metal. Its dimensions are 115 x 1.5 x 22.2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the disc is 1 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 13,300 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
GRAPHITE's 2200 W 58G540 diamond drill with a power output of 2200 W and a speed of 0 to 2000 rpm. The drill chuck has a diameter of 1 1/4". The unit allows holes of up to 180 mm to be drilled. The drill is suitable for water cooling. It enables repair and construction work to be carried out smoothly and precisely. It allows wet drilling in stone, asphalt and reinforced concrete for plumbing and general construction work. Drill rig offered with tripod, shoulder support, tripod handle, auxiliary handle, mounting screws and spanners.
Cutting wheel, corundum for metal 115 x 2 x 22.2 mm, 41 A46-T-BF, 57T107 by GRAPHITE is an alumina wheel that is designed for cutting metal. Its dimensions are 115 x 2 x 22.2 mm. This model has a flat design and the designation 41 A46-T-BF. The thickness of the disc is 1 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 13,300 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
The 3-19mm chamfer 58T552 by GRAPHITE is a chamfer with a ¼" HEX shank, made from carbon steel and designed for deburring and repairing damaged threads. It works well with plastics, wood and metal. The tapered form makes it easy to quickly chamfer the edge and smooth the entrance of the hole. The GRAPHITE brand chamfer is recommended for many tasks.
Versatile GRAPHITE impact drill with 550 W motor is perfect for materials like wood, plastics, metal and ceramics. After switching to impact mode it also allows for drilling in materials like concrete or brick with equal ease. The drill reaches speed up to 3000 rpm during operation and with impact mode on its speed reaches 48 000 impacts per minute. The power tool features function of clockwise and counter-clockwise head rotation. Ergonomic design, small weight and long power cord make operation in hard to reach areas definitely easier. Prolonged operation in hard working conditions is easier thanks to switch lock function for continuous operation at uniform speed. The tool is equipped with flexible and strong power cord in rubber coating, 3 m long, also designed for professional and industrial applications for use indoors and outdoors.
GRAPHITE electric mixer with a 1600 W motor for mixing plaster, mortar or paint. Thanks to its robust construction and efficient heat dissipation system, the mixer is suitable for continuous operation in finishing work on medium-sized construction sites. The mixer has an adjustable spindle speed. In first gear the motor can generate up to 500, and in second gear up to 800 revolutions of spindle per minute. A properly shaped handle of the device allows comfortable and safe work for a long time. Also for safety, the mixer is equipped with a locking device to prevent accidental activation. The mixer comes with two stirrers, one mandrel and two spanners. Compliance with European standards is ensured by CE certification.
The 125 x 2.0 x 22.2 mm, 42 A46-T-BF, convex 57T119 corundum metal cutting wheel by GRAPHITE is a convex wheel with a diameter of 125 mm, a thickness of 2 mm and a mounting hole of 22.2 mm. It features a maximum speed of 12,200 rpm, with an operating speed of 80 m/s. The product is designed for cutting metal. The GRAPHITE blade meets the requirements of the EN 12413 standard.
