GRAPHITE

The GRAPHITE impact bits (ref. 56H514) type TX25, with a total length of 25 mm, are heavy duty bits designed for heavier work with high torques using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

Screwdriver bit PZ2 x 6.35 x 150 mm, 1/4" 56H572 by GRAPHITE is a PZ2 screwdriver bit of 6.35 size and 150 mm length. Mounted on a ¼" thread. It features high resistance to deformation and is recommended for high frequency work. The element is made of S2 steel. The tip is recommended for POZDIRIV type screws and will prove useful in every professional and DIY workshop.

Impact bits TX10 x 25 mm, 20 pieces 56H549 by GRAPHITE is a set of 20 pieces of robust TX10 type impact bits with an overall length of 25 mm. The accessories are made from robust S2 steel, with a ¼" drive square size. Essential for every professional and DIY workshop.

The bag-type filter for 59G613, 59G613-144 by GRAPHITE is a bag-type filter for use with the 59G613 GRAPHITE industrial hoover model. It is characterised by its dimensions: diameter 14 cm and length 17 cm. Allows you to protect the device from dust particles and other debris.

Impact bits TX20 x 25 mm, 20 pieces 56H545 by GRAPHITE type TORX 20 with an overall length of 25 mm. They are recommended for ¼" drive and heavy-duty high torque work using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. The set offers 20 pieces for professionals and DIY enthusiasts.

The connection hose for 59G613, 59G613-147 by GRAPHITE is a hose dedicated to the industrial hoover number 59G613, characterised by a length of 150 cm and a diameter of 32 mm. A high quality accessory from the GRAPHITE brand.

Mixer working part with a diameter of 140 mm dedicated to stem ref 56H700. Injection agitator designed for thin solutions, e.g. paints, gypsum plaster, structural paints. The solution is injected downwards so there is no spillage or contamination.

The crevice nozzle (for 59G613, 59G614) 59G613-149A by GRAPHITE is a nozzle designed for industrial hoovers with part numbers 59G613 and 59G614. It is characterised by a diameter of 32 mm. Designed to remove debris from hard to reach areas.

Screwdriver bits PH2 x 25 mm, 100 pcs. 56H626 by GRAPHITE are characterised by the PH2 type and a total length of 25 mm. They have a ¼" hexagonal profile. The bits are made from high grade S2 steel. They are compatible with both mains and battery powered tools. The set consists of 100 individual pieces. The GRAPHITE brand is recommended for professionals and DIY enthusiasts.

The 58GE106, 58GE106-24 Sprayer Nozzle Kit by GRAPHITE is a set of three components - a single round nozzle, a double round nozzle and a fan (flat jet) nozzle. It is dedicated to the 58GE106 sprayer by GRAPHITE. It offers a flow rate from 0.8 l/min (when using the single nozzle) to 1.3 l/min (when using the double nozzle). The nozzle opening is 1.6mm. This GRAPHITE-branded kit with nozzles of varying spray patterns is recommended for spraying protective substances and fertilisers in the garden or allotment, for example.

Screwdriver bit PH1 x 6.35 x 300 mm, 1/4" 56H576 by GRAPHITE is a PH1 type bit with size 6.35 and length 300 mm. Mounted on a ¼" thread. It features high resistance to deformation and is recommended for high frequency work. The element is made of S2 steel. The tip is recommended for Phillips screws, it will prove useful in every professional and DIY workshop.

Screwdriver bit PZ1 x 6.35 x 150 mm, 1/4" 56H570 by GRAPHITE is a PZ1 (2-3 mm) screwdriver bit of 6.35 size and 150 mm length. Mounted on ¼" thread. It features high resistance to deformation and is recommended for high frequency work. The element is made of S2 steel. The tip is recommended for POZDIRIV screws and will prove useful in every professional and DIY workshop.

Agitator working part with a diameter of 120 mm dedicated to stem ref 56H700. Injection mixer designed for dense solutions, e.g. mortars, concretes, adhesives, which have sand, gravel or expanded clay as filling.

Mixer working part with a diameter of 140 mm for mandrel ref. 56H700.Feeder agitator for thick solutions, e.g. mortar, concrete, adhesives, which have sand, gravel or expanded clay as the filling. Steel, galvanised

Impact bits TX15 x 25 mm, 20 pieces 56H544 by GRAPHITE type TORX 15 with an overall length of 25 mm. They are recommended for ¼" drive and heavy-duty high torque work using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. The set offers 20 pieces for professionals and DIY enthusiasts.

Screwdriver bit PH2 x 6.35 x 150 mm, 1/4" 56H577 by GRAPHITE is a screwdriver bit type PH2 with size 6.35 and length 150 mm. Mounted on a ¼" thread. It features high resistance to deformation and is recommended for high frequency work. The element is made of S2 steel. The tip is recommended for Phillips screws, it will prove useful in every professional and DIY workshop.

Impact bits TX30 x 25 mm, 20 pieces 56H547 by GRAPHITE type TORX 30 with an overall length of 25 mm. They are recommended for ¼" drive and heavy-duty high torque work using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. The set offers 20 pieces for professionals and DIY enthusiasts.

Screwdriver bit PH2 x 6.35 x 300 mm, 1/4" 56H578 by GRAPHITE is a screwdriver bit type PH2 with size 6.35 and length 300 mm. Mounted on a ¼" thread. It features high resistance to deformation and is recommended for high frequency work. The element is made of S2 steel. The tip is recommended for Phillips screws, it will prove useful in every professional and DIY workshop.