GRAPHITE

Circular saw blade, solid carbide, 235 x 30 mm, 48 teeth

02-55H693

The GRAPHITE Widia saw blade (ref. 55H693) has an outside diameter of 235 mm and is made from C50 special steel with increased wear and warp resistance. Tungsten carbide teeth with ATB (alternate) geometry for rough cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.

23,40€

On request in weeks

Velcro sanding discs 225 mm, K180, 5 pcs (for 59G260, 59G264, 59G265)

02-55H781

Velcro sand paper GRAPHITE (ref. no. 55H781) with granulation K180 i diameter 225 mm, used for grinding gypsum surfaces with extension grinders. The discs have perforated holes on the entire surface, thanks to which the sanding dust is easily drained. Velcro fastening allows quick replacement of used abrasive disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

11,80€

On request in weeks

Circular saw blade, solid carbide, 180 x 30 mm, 40 teeth

02-55H604

Solid carbide saw blade GRAPHITE (ref. no. 55H604) with diameters 180 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.

14,90€

On request in weeks

HSS-CNC metal twist drill, 124°, "Pro-Tec", 4.0 mm

02-55H018

GRAPHITE metal drill with 4.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.

1,50€

On request in weeks

HSS-CNC twist drill, 124°, "Pro-Tec", 1.5 - 6.5 mm, set 13 pcs

02-55H088

A set of HSS-CNC twist dril GRAPHITE (Ref. 55H088) with diameters ranging from 1.5 to 6.5 mm, made of high-alloy high speed steel using CNC machining. Ideally suited for drilling precise holes in all types of metals.

20,79€

On request in weeks

Bi-metal hole saw 21 mm

02-57H901

GRAPHITE bimetal hole cutter with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials.

4,50€

On request in weeks

Water sanding paper 230 x 280 mm, K60

02-55H896

Water abrasive paper GRAPHITE (ref. no. 55H896) in a sheet with dimensions 230 x 280 mm and granulation 60. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

0,595€

On request in weeks

Sanding paper 230 x 280 mm, K220

02-55H893

Sanding paper GRAPHITE (ref. no. 55H893) in a sheet with dimensions 230 x 280 mm and granulation 220. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

0,397€

On request in weeks

HSS-Co metal drill 3.5 mm, 10 pcs

02-57H023-10

Metal drills GRAPHITE (ref. no. 57H023-10) with diameters 3.5 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.

10,80€

On request in weeks

Sanding paper 115 mm, K100, roll 2.5 m

02-55H862

Sanding paper GRAPHITE (ref. no. 55H862) in a roll, 2.5 m long, 115 mm wide and granulation 100. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

2,29€

On request in weeks

Circular saw blade, solid carbide, 300 x 30 mm, 40 teeth

02-55H606

Solid carbide saw blade GRAPHITE (ref. no. 55H606) with diameters 300 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.

40,50€

On request in weeks

Sanding paper 115 mm, K220, roll 2.5 m

02-55H866

Sanding paper GRAPHITE (ref. no. 55H866) in a roll, 2.5 m long, 115 mm wide and granulation 220. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

2,29€

On request in weeks

Abrasive sponge 120 x 95 x 10 mm, K100

02-55H913

Abrasive sponge GRAPHITE (ref. no. 55H913) with dimensions 120 x 95x 10 mm and granulation 100. Designed for finish grinding. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on both sides of the sponge. Thanks to its soft structure, the sponge adapts perfectly to the shape of ground surfaces. The sponge can be cut into smaller pieces to process hard-to-reach areas. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

1,00€

On request in weeks

HSS-Co metal drill 4.5 mm, 10 pcs

02-57H028-10

Metal drills GRAPHITE (ref. no. 57H028-10) with diameters 4.5 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.

17,79€

On request in weeks

Sabre saw blade BIM 225 x 20 x 0.9, 18 TPI, 2 pcs set

02-57H953

GRAPHITE sabre saw blades have teeth of high speed steel. Combination of high speed steel with chromium vanadium steel allows to use the blades for cutting of all pieces made of steel, stainless steel, plastic and wood. Combination of these two steel types guarantees unique blade flexibility, which allows to work with bent blade. Therefore, it is possible to make cuts in hard to reach areas.

9,70€

On request in weeks

Sanding paper, velcro 115 x 230 mm, K180, 5 pcs, with holes

02-55H725

Velcro sand paper GRAPHITE (ref. no. 55H725) with dimensions 115 x 230 mm and granulation 180, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

3,20€

On request in weeks

Fibra sanding disc 125 mm, K60, 3 pcs

02-55H856

Fibra sanding disc GRAPHITE (ref. no. 55H856) with outer diameter 125 mm and granulation 60. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

2,60€

On request in weeks

Abrasive cloth 115 mm, K120, roll 2.5 m

02-55H871

Sanding cloth GRAPHITE (ref. no. 55H871) in a roll, 2.5 m long, 115 mm wide and granulation 120. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

3,00€

On request in weeks

HSS-CNC metal twist drill, 124°, "Pro-Tec", 8.0 mm

02-55H029

GRAPHITE metal drill with 8.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.

4,10€

On request in weeks

Circular saw blade, solid carbide, 235 x 30 mm, 40 teeth

02-55H692

GRAPHITE Forked Saw Blade (Ref. 55H692) 235mm outside diameter, made from C50 special steel with increased wear and warp resistance. Tungsten carbide teeth with ATB (alternate) geometry for rough cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.

22,80€

On request in weeks