Электроинструмент и ручной инструмент GRAPHITE в Hammerjack
Hammerjack — официальный импортёр продукции GRAPHITE. GRAPHITE — европейский бренд инструментов, предлагающий качественный электроинструмент, аккумуляторный инструмент и ручной инструмент для строительства, ремонта и монтажных работ. Продукция сочетает долговечность, удобство использования и отличное соотношение цены и качества.
В ассортимент входят аккумуляторные дрели, ударные дрели, угловые шлифмашины, электролобзики, циркулярные пилы, шлифовальные машины, многофункциональные инструменты, ручной инструмент и широкий выбор аксессуаров.
Инструменты для требовательных пользователей
Инструменты GRAPHITE обеспечивают надежную работу и длительный срок службы при выполнении строительных, монтажных и ремонтных работ.
Почему выбирают GRAPHITE?
Официальный импортёр продукции GRAPHITE.
Качественный электро- и аккумуляторный инструмент.
Широкий ассортимент ручного инструмента.
Надёжные и эргономичные решения.
Отличное соотношение цены и качества.
Надёжные инструменты для любых проектов
GRAPHITE предлагает надежные решения для строителей, монтажников, специалистов по обслуживанию и требовательных домашних мастеров.
Blade for reciprocating saw GRAPHITE about the length 228 mm and 6 with teeth an inch long used for cutting fiber-cement, plasterboard, concrete, fiberglass and resin reinforced composites with saber saws. The maximum thickness of the materials is 175 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.
Delta sanding paper GRAPHITE (ref. no. 55H767), size 93 x 93 mm and granulation K120. Dedicated to grinding wood, wood-based materials, metals and plastics. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system. Product with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Velcro sand paper GRAPHITE (ref. no. 55H779) with granulation K80 i diameter 225 mm, used for grinding gypsum surfaces with extension grinders. The discs have perforated holes on the entire surface, thanks to which the sanding dust is easily drained. Velcro fastening allows quick replacement of used abrasive disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding paper GRAPHITE (ref. no. 55H891) in a sheet with dimensions 230 x 280 mm and granulation 180. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding paper GRAPHITE (ref. no. 55H889) in a sheet with dimensions 230 x 280 mm and granulation 120. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Set of masonry drills GRAPHITE (Ref. 57H572) with diameters range 5.0 to 12.0 mm and SDS plus shank, allow for efficient drilling in concrete and ceramic materials by hammer drill .
Sanding net GRAPHITE (ref. no. 55H744) with granulation K80, made of abrasive net with diameter 225 mm fastened with velcro, used for grinding plaster and gypsum finishing with drywall sanders. Placing the abrasive on the mesh reduces the clogging of the disc with the ground material, thanks to which they have a longer life than sandpaper discs. The cloth’s open coating (50-60% of the cloth surface is covered with abrasive grain) guarantees greater resistance of the grain surface to clogging with abrasive dust. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Metal drills GRAPHITE (ref. no. 57H015) with diameters 2.2 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
GRAPHITE metal drill with 9.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Metal drills GRAPHITE (ref. no. 57H056-5) with diameters 10.5 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
GRAPHITE Widia Saw Blade (Ref. 55H695) 235mm outside diameter, made from C50 special steel with increased wear and warp resistance. Tungsten carbide teeth with TCG (trapezoidal) geometry for efficient cutting of aluminium materials. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the requirements of professionals.
GRAPHITE segmented diamond disc thanks to hot pressed segments is perfect for heavy duty construction tasks. Highly resistant diamond segments allow for efficient cutting pieces made of concrete, reinforced concrete, granite, marble, stone, brick etc.
Nails GRAPHITE (nr ref. 56H765) GA18, Type 90, in length 40 mm, for use with many types of staplers, incl. for 2in1 Energy + 18V Li-ion battery stapler (ref. 58G081). Made of galvanized steel, which is more resistant to corrosion and mechanical damage. Nails are widely used, incl. in upholstery, construction or carpentry. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Water abrasive paper GRAPHITE (ref. no. 55H898) in a sheet with dimensions 230 x 280 mm and granulation 100. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding cloth GRAPHITE (ref. no. 55H881) in a sheet with dimensions 230 x 280 mm and granulation 220.Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE bimetal hole cutter with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials.
Velcro sand paper GRAPHITE (ref. no. 55H737) with dimensions 93 x 185 mm and granulation 60, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging . Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 5.5 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Blade for reciprocating saw GRAPHITE about the length 240 mm and 2 with teeth an inch long used for cutting cellular concrete, brick, cement board, plasterboard using saber saws. The maximum thickness of the materials is 150 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.
