GRAPHITE

Wire wheel brush 115 mm, crimped wire, steel, M14

02-57T436

GRAPHITE's 115 mm diameter wire wheel brush, crimped steel wire, M14, 57T436 is made from crimped steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product complies with the EN 1083-2 standard and is well suited for working on metal surfaces, cleaning, removing rust, paint or dirt.

4,90€

On request in weeks

Diamond hole saw 30 mm

02-56T734

GRAPHITE's 30mm 56T734 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.

10,90€

On request in weeks

Abrasive mesh 115 x 280 mm, P150

02-58T155

Sanding grid 115 x 280 mm, P150 58T155 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It features a double-sided grit and black silicon carbide grain. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to the double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.

0,298€

On request in weeks

Abrasive sponge 70 x 25 x 100mm, P80

02-58T161

Sanding sponge 70 x 25 x 100 mm, P80, 58T161 by GRAPHITE is a sponge designed for hand sanding and finishing. Used for smoothing putty, drywall, plaster, paint, plastics, wood, metal and varnish coatings. The abrasive grain made of electro-corundum is located on four sides of the sponge. The soft structure allows it to conform to the shape of the surface to be sanded, and for hard-to-reach areas, the sponge can be easily cut into smaller pieces. Thanks to its thickness and flexibility, the GRAPHITE sanding sponge distributes the pressure of the hand evenly, avoiding localised depressions and scratches.

0,806€

On request in weeks

Turbo cutting diamond disc, 230 x 22.22 mm, dry

02-57T320

Turbo diamond cutting wheel, 230 x 22.2 mm, dry 57T320 by GRAPHITE is a turbo dry cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.8 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.

14,30€

On request in weeks

Segmented diamond cutting disc, 180 x 22.2 mm, dry

02-57T310

Segmented diamond cutting wheel, 180 x 22.2 mm, dry 57T310 by GRAPHITE is a segmented dry cutting wheel with a diameter of 180 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.

7,20€

On request in weeks

Wood drill, extended 6 x 400 mm

02-54T556

The Wood Drill, Extended 6 x 400 mm 54T556 by GRAPHITE is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It is characterised by a diameter of 6 mm and a length of 400 mm. Suitable for tasks with a maximum speed of 2500 rpm. It will work well for many DIY tasks.

1,60€

On request in weeks

Saw blade, widia, 200 x 30 mm, 60 teeth

02-57T227

Saw blade, widia, 200 x 30 mm, 60 teeth 57T227 by GRAPHITE, with an external diameter of 200 mm and a mounting hole diameter of 30 mm. It has 60 teeth, the cut width is 2.2 mm and the tooth angle is 15°. The maximum speed is 8,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

11,40€

On request in weeks

25 mm nylon face brush with 6 mm shank

02-57T426

The 25mm nylon butt brush with 6mm shank 57T426 by GRAPHITE is made of nylon. It has a maximum speed of 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE nylon brush is a versatile product for many woodworking tasks.

3,60€

On request in weeks

Diamond grinding disc, 2 segments, 115 x 22.2 mm, dry

02-57T323

GRAPHITE's 57T323 diamond grinding wheel, 2 segments, 115 x 22.2 mm, dry 57T323 is equipped with two segments and designed for dry use. Reduction rings are included in the set. The segments are characterised by a height of 4.5 mm and a width of 8 mm. The maximum speed of the GRAPHITE disc is 13 600 rpm, equivalent to 80 m/s. The disc is designed for grinding concrete, cellular concrete, brick and stone. The holes in this accessory improve cooling while working and effectively remove dust and abrasive material. This makes grinding faster and more efficient. The diamond-coated segments ensure effective and efficient sanding. They wear evenly, which also guarantees consistent work quality. The segmented design improves heat dissipation and prevents the disc from overheating. GRAPHITE's product meets the requirements of EN 13236.

10,80€

On request in weeks

Saw blade, widia, 180 x 30 mm, 40 teeth

02-57T215

Saw blade, widia, 180 x 30 mm, 40 teeth 57T215 by GRAPHITE, with an external diameter of 180 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 10,000 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

7,20€

On request in weeks

Diamond grinding disc, 2 segments, 180 x 22.2 mm, dry

02-57T325

GRAPHITE's 57T325 diamond grinding wheel, 2 segments, 180 x 22.2 mm, dry 57T325 is equipped with two segments and designed for dry use. Reduction rings are included in the set. The segments are characterised by a height of 5 mm and a width of 8 mm. The maximum speed of the GRAPHITE disc is 8 600 rpm, equivalent to 80 m/s. The disc is designed for grinding concrete, cellular concrete, brick and stone. The holes in this accessory improve cooling during operation and effectively remove dust and abrasive material. This makes grinding faster and more efficient. The diamond-coated segments ensure effective and efficient sanding. They wear evenly, which also guarantees consistent work quality. The segmented design improves heat dissipation and prevents the disc from overheating. GRAPHITE's product meets the requirements of EN 13236.

22,80€

On request in weeks

Water sanding paper 230 x 280 mm, P120

02-58T213

Water sandpaper 230 x 280 mm, P120, 58T213 by GRAPHITE is a water-based hand sanding paper. It has a full grain of electro-corundum, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.

0,298€

On request in weeks

Sanding belts 75 x 533 mm, P80, 3 pcs

02-58T368

Endless belts 75 x 533 mm, P80, 3 pcs. 58T368 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and an electrocorundum coating. GRAPHITE belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.

2,90€

On request in weeks

Blade for reciprocating saw, BIM, 152 x 19 x 0.9 mm, 14 TPI

02-57T562

The sabre saw blade, BIM 152 x 19 x 0.9 mm, 14 TPI, 57T562 by GRAPHITE is a bi-metal (BIM) blade with an overall length of 152 mm, a width of 19 mm and a thickness of 0.9 mm. It has 14 teeth per inch (TPI) and a tooth spacing of 1.8 mm. It is designed for straight cutting of sheet metal 3-8 mm thick, open and closed pipes, and profiles from 10 to 100 mm in diameter. The flexible design of the GRAPHITE blade allows it to work in harder to reach places.

3,20€

On request in weeks

SDS Plus concrete drill bit with double helix 10 x 1000 mm

02-56T122

GRAPHITE's SDS Plus double helix concrete drill bit 10 x 1000 mm 56T122 is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 10 mm and an overall length of 1000 mm and a working length of 800 mm. It will prove useful for many tasks around the home and in the workshop.

8,61€

On request in weeks

Wood hole cuttters 26 - 63 mm, h 25 mm, set 7 pcs

02-56T749

Wood hole saws 26 - 63 mm, h 25 mm, set of 7 pieces 56T749 by GRAPHITE is a set containing 7 pieces with diameters: 26, 32, 38, 45, 50, 56 and 63 mm. The height of each hole saw is 25 mm and the maximum drilling depth is 18 mm. The maximum rotational speed is 1500 rpm. The product is designed for drilling in wood, plasterboard and plastic.

3,30€

On request in weeks

Saw blade, widia, 185 x 30 mm, 48 teeth

02-57T220

Saw blade, widia, 185 x 30 mm, 48 teeth 57T220 by GRAPHITE, with an external diameter of 185 mm and a mounting hole diameter of 30 mm. It has 48 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 9,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

9,70€

On request in weeks

Sanding paper 93 x 230 mm, P40, 5 pcs., without holes

02-58T255

Sanding papers 93 x 230 mm, P40, 5 pieces, without holes 58T255 by GRAPHITE are P40-graded papers suitable for sanding metal, wood and plastic. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures adequate performance. GRAPHITE sanding papers are offered in a practical set of 5.

1,20€

On request in weeks

Cordless angle grinder Energy+ 18V, Li-Ion, disc 115 x 22.2 mm, without battery

02-58G003

GRAPHITE angle grinder, compatible with 18V Li-Ion GRAPHITE Energy+ batteries. Designed for 115 mm diameter discs, and operating with a speed of 10,000 rpm. The angle grinder is equipped with a two-element switch button, ensuring safety and full control over the device. The design of the power tool is characterized by high ergonomics - the tapered gripping part has been covered with anti-slip material, so that the power tool lies firmly in your hand Thanks to the flat gear housing, the device can also be used in hard-to-reach places. A built-in low profile spindle lock button protects the user from accidentally activating the lock during operation. The arrangement of the vent holes outside the grip zone protects the motor against overheating. The position of the blade guard can be adjusted with no additional tool, just by hand.

54,70€

On request in weeks