HOLZKRAFT

Very sturdy, open-spanned long belt, which is additionally manufactured with new Advanced Coating Technology (ACT) and thus is significantly more resistant to clogging due to sanding dust, especially when working with soft woods. A special product for resin-rich or clogging materials. Areas of application are intermediate and fine sanding by means of a contact shoe in the finer grain area. Antistatic, open scattering and ACT ensure very good removal performance and outstanding service life.
Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

Very sturdy, open-spanned long belt, which is additionally manufactured with new Advanced Coating Technology (ACT) and thus is significantly more resistant to clogging due to sanding dust, especially when working with soft woods. A special product for resin-rich or clogging materials. Areas of application are intermediate and fine sanding by means of a contact shoe in the finer grain area. Antistatic, open scattering and ACT ensure very good removal performance and outstanding service life.
Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

Very sturdy, open-spanned long belt, which is additionally manufactured with new Advanced Coating Technology (ACT) and thus is significantly more resistant to clogging due to sanding dust, especially when working with soft woods. A special product for resin-rich or clogging materials. Areas of application are intermediate and fine sanding by means of a contact shoe in the finer grain area. Antistatic, open scattering and ACT ensure very good removal performance and outstanding service life.
Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

• M33x3.5 mounting flange for the CBN grinding wheel 5832100
• Good concentricity for perfect running of the grinding wheel
• Including run-off protection and holes for grub screws, therefore also protected against unintentional run-off on machines without ASR groove.
• Made in Europe

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

For sharpening all gouges, tubes and other tools with complex shapes, such as chisel feet and carbide turning tools

• For sharpening all gouges, tubes and other tools with complex shapes, such as chisel feet and carbide turning tools
• The device can be adapted to the shape of the tool so that a uniform grinding bevel can also be produced on the rounded cutting edge
• Compatible with the tool rests of the woodturning machines (5831411, 5831412, 5831413) to sharpen the turning tools directly on the machine
• Also perfectly suitable for the wet grinding system NTS 201 (5750201) and NTS 256 (5750256)

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Very sturdy, open-spanned long belt, which is additionally manufactured with new Advanced Coating Technology (ACT) and thus is significantly more resistant to clogging due to sanding dust, especially when working with soft woods. A special product for resin-rich or clogging materials. Areas of application are intermediate and fine sanding by means of a contact shoe in the finer grain area. Antistatic, open scattering and ACT ensure very good removal performance and outstanding service life.
Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

For sharpening HSS and carbide tools with a grit size of 180

• CBN grinding wheel for sharpening HSS tools with a grit size of 180
• Consisting of a steel body coated with cubic boron nitride (CBN)
• Perfect heat dissipation when grinding tools thanks to the metal bond, preventing the tool from annealing
• Virtually no flying sparks during machining
• Extremely dimensionally stable, therefore no dressing necessary as with conventional corundum grinding wheels
• Maximum speed 2100 rpm
• Made in Europe

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Very sturdy, open-spanned long belt, which is additionally manufactured with new Advanced Coating Technology (ACT) and thus is significantly more resistant to clogging due to sanding dust, especially when working with soft woods. A special product for resin-rich or clogging materials. Areas of application are intermediate and fine sanding by means of a contact shoe in the finer grain area. Antistatic, open scattering and ACT ensure very good removal performance and outstanding service life.
Manufacturer
Klingspor GmbH & Co. KG
Hüttenstraße 36, 35708 Haiger, Germany
www.klingspor.de

• Solid steel tool rest for sharpening tools
• 25.3 mm clamping diameter

• Solid steel tool rest for sharpening tools directly on the woodturning machine with the CBN grinding wheel available as an accessory
• 25.3 mm clamping diameter
• With practical height adjustment

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

The load capacity per roller is 80 kg
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For securing chucks and other clamping options

• For securing chucks and other clamping options
• To prevent the chuck from running off when running clockwise/anticlockwise or during heavy braking

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Second chuck body prevents time-consuming retooling of the existing chuck body

• Suitable for spindle threads with M33x3.5
• Second chuck body prevents time-consuming retooling of the existing chuck body
• Simply screw on the second chuck body with any configuration and start the next machining step

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Solid steel tool rest for sharpening tools
• 16 mm clamping diameter

• Solid steel tool rest for sharpening tools directly on the woodturning machine with the CBN grinding wheel available as an accessory
• 16 mm clamping diameter
• With practical height adjustment

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Four different jaw chucks suitable for spindle threads with M33x3.5 for the following clamping options:

• Outside closed: 90 mm, inside closed 75 mm
• Outside closed: 50 mm, inside closed 38 mm
• Outside closed: 38 mm, inside closed 18 mm
• Outside closed: 21 mm, inside closed 9 mm

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

For an achievable tip width of 1000 mm
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Suitable for spindle thread with M33x3.5

• Suitable for spindle thread with M33x3.5
• Clamping jaws small: Clamping = 10 - 64 mm, spreading = 26 - 62 mm
• Stepped jaws: Spreading small = 19 - 53 mm, spreading large = 39 - 75 mm
• Clamping jaws dovetail: Clamping = 32 - 68 mm, spreading =46 - 82 mm
• Clamping jaws large: Clamping = 75 - 112 mm, spreading = 90 - 126 mm

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de