Kampaania - Hammerjack

GRT 18V-40 cordless trimmer in cardboard box (without battery and charger)

48-S06008D0200

Key features:

Battery voltage: 18 V
Max. cutting width: 40 cm
Shape (handle): D
Sound power level LWA: 91 dB(A)
Weight: 4,6 kg
Number of batteries included: 0
Product Range: Bosch 18V

265,00€ 373,00€

В наличии 2

DREMEL 3200 1/90 multi-tool 130W with 190-piece accessory set in cardboard box

48-DF0133200JA

Key features:

Power: 130 W
Tool holder type: EZ Twist
No-load speed: 35000 rpm
Weight: 0,5 kg

Scope of delivery:

Dremel 3200
1x Flexible shaft (225)
Manual
Accessory card
1x Mandrel (401)
1x Mandrel (402)
1x Wire brush 19 mm (403)
5x Polishing disc 13 mm (414)
2x Polishing disc 26 mm (429)
1x Polishing paste (421)
1x Sanding belt and mandrel 13 mm grit 60 (407)
2x Sanding belt 13 mm grit 60 (408)
2x Sanding belt 13 mm grit size 120 (432)
20x heavy-duty cut-off wheel 24 mm (420)
1x Aluminium oxide grinding stone 9.5 mm (932)
1x Silicon carbide grinding stone 3.2 mm (83322)
1x High-speed cutter (191)
25x Sanding disc grit 180 (411)
25x Sanding disc grain 240 (413)
1x Drill bit (150)

102,60€ 114,00€

В наличии 1

Double toothed long TCT cutter 10x50mm, shank 8mm

03-56207

The NEO TOOLS double-edged long end mill, widia, 10 x 50 mm, shank 8 mm 56-207 is a tool made of tungsten carbide (TCT) and intended for precise machining of wood, PVC and chipboard using router bits. The cutter head is equipped with two blades and a carbide cutting insert. Dimensions of the working part: diameter 10 mm, height 50 mm. The shank diameter is 8 mm.

11,25€ 12,10€

В наличии 5

Diamond hole saw 45 mmxM14

03-55312

The 45 mm x M14 diamond hole saw, 55-312 by NEO TOOLS, with a diameter of 45 mm and M14 thread, is designed for dry work with an angle grinder. The durable vacuum brazed diamond blank and the side holes facilitate air ventilation and removal of spoil. The working length is 40 mm and the overall length is 60 mm, making it easy to drill typical mounting holes. The maximum speed is 11,000 rpm. Applications include ceramic, stoneware, stone and concrete.

38,04€ 40,90€

В наличии 3

HSS-Co metal drill bit, 8.5 mm

03-57048

HSS-Co 8.5 mm metal drill bit, 57-048 by NEO TOOLS is a deeply ground drill bit according to DIN 338 and made of M35 steel with 5% cobalt addition. It uses an apex angle of 135° and type C shear correction. It has a cylindrical handle. The length of the working part is 75 mm and its overall length is 117 mm. The maximum speeds are: INOX 425-475 rpm, general metals 850-950 rpm. The purpose of this NEO TOOLS brand drill bit is to drill in demanding materials such as stainless, acid-resistant and heat-resistant steel.

6,98€ 7,50€

В наличии 3

HM semicircular disc for ceramics, 85 mm

03-58004

8,65€ 9,30€

В наличии 5+

Diamond hole saw 35 mmxM14

03-55310

The 35 mm x M14 diamond borer, 55-310 by NEO TOOLS, with a diameter of 35 mm and M14 thread, is designed for dry use with an angle grinder. The durable vacuum brazed (vacuum brazed) diamond blank and paraffin filling ensures cooling during drilling. The working length is 40 mm and the overall length is 60 mm, facilitating the drilling of typical mounting holes. The maximum speed is 11,000 rpm. Applications include ceramic, stoneware, stone and concrete.

33,20€ 35,70€

В наличии 5+

Akutrell 40V DF003G 150/88Nm, ilma akuta

40-DF003GZ

DF003G on suure kinnitamisjõuga, harjavaba mootoriga, löögi funktsiooniga XGT® akutrell puurimiseks ja kruvide keeramiseks. Metallist 13 mm iselukustuv padrun suurendab otsiku haardevõimet ja vastupidavust. Võtmeta kiirpadrun võimaldab kiiret ja lihtsat otsiku paigaldust ning eemaldamist. Active Feedback sensing Technology (AFT) lülitab mootori välja, kui otsiku pöörlemine järsult peatub, suurendades sellega ohutust. Elektriline pidur kasutaja ohutuseks. Kõrge veekindlus koos XPT (Extreme Protection Technology) tehnoloogiaga tagab töökindluse ka rasketes tingimustes.
Kinnitamisjõudu saab hõlpsalt reguleerida pöördnupu abil, samal ajal kui digiekraan annab selge visuaalse kinnituse valitud pöördemomendi kohta. Elektrooniline sidur pakub täiustatud pöördemomendi ja siduri astmeid madala, keskmise ja suure kiiruse režiimides. Kolm töörežiimi suurendavad tööefektiivsust raskete tööde puhul. Keskmise kiiruse režiim ühendab suure pöördemomendi ja kiiruse, muutes selle ideaalseteks ülesanneteks, nagu pikkade kruvide keeramine.
Madala kiiruse režiimi sujuvkäivitus vähendab tagasilööki suurte inertsotsikutega töötamisel. Pöörlemissuuna vahetamise lüliti on paigutatud mugavalt leitavasse kohta, et seda oleks lihtne töö käigus kasutada.

Ere LED-tuli asub käepideme allosas, pakkudes laiemat valgustusulatust. Valgusrežiimis pikendatud järelvalgustus võimaldab töövalgustit kasutada ka eraldiseisva valgustina pimedas töökeskkonnas. Vastupidav ja pööratav vöökinnitus võimaldab tööriista mugavalt ajutiselt riputada, kui seda parasjagu ei kasutata.

266,03€ 354,70€

В наличии 3

Cordless Hammer Drill 40V HP003GZ 13 mm 150/88 Nm, Bare Tool

40-HP003GZ

The Makita HP003GZ is a high‑torque 40 V max XGT brushless cordless hammer driver drill, engineered for heavy‑duty professional applications. It is designed for demanding driving, drilling and hammer drilling tasks in wood, steel and masonry, delivering exceptional power and control.

The tool delivers 150 Nm (hard) / 88 Nm (soft) of fastening torque, with a maximum torque of up to 180 Nm. A 3‑speed mechanical gearbox (low / medium / high) provides the ideal balance between speed and torque, making it especially effective for long and large‑diameter fasteners.

Safety and precision are enhanced by Active Feedback sensing Technology (AFT), which shuts off the motor if rotation suddenly stops. The electronic clutch with digital adjustment dial allows highly accurate torque selection. XPT (Extreme Protection Technology) improves resistance to dust and moisture, ensuring reliable operation in harsh job‑site conditions.

Battery and charger not included – bare tool version.

Key Features:

Power: 40 V Makita XGT
Max. torque: 150 / 88 Nm (up to 180 Nm)
Chuck size: 13 mm all‑metal keyless chuck
Functions: driving, drilling, hammer drilling
Brushless motor
3‑speed mechanical gearbox
Electronic clutch with digital torque adjustment
AFT kickback protection
XPT dust and water resistance
Powerful LED work light
Compatible with all Makita 40 V XGT batteries

275,33€ 367,10€

В наличии 3

USB-PD laadija 14,4V ja 18V akudele

40-1916D9-8

Kiirlaadija 14,4 V ja 18 V LXT® liugakudele. Varustatud jahutusventilaatoriga, mis hoiab akut laadimise ajal jahedana ja võimaldab oluliselt kiiremat laadimist. Laadimine on optimeeritud pinge, voolu ja temperatuuri järgi. Laadimisaeg sõltub nii PD-sisendist (60 / 80 / 100 W) kui ka aku mahutavusest.

64,20€ 85,60€

В наличии 2