Oil compressor 100 l, 230 V, 12K030-1 by NEO TOOLS is an oil type compressor with a capacity of 100 litres and a power of 1,500 watts. It requires a power supply of 230 V/ 50 Hz. It features an air intake of 210 l/min and a sound intensity of 74 dB. The oil compressor by NEO TOOLS has dimensions of 1,100 x 400 x 830 mm. It is recommended for professional workshops, where easy access to connectors, pressure regulation and manometers, as well as the ability to work with a wide range of pneumatic tools - is very important. The convenient handle makes it easy to transport.
NEO 12l oil-free compressor (ref. 12K020) with 500W will come in handy both at home and in the workshop. The compressor capacity is 95 l/min. Thanks to compressed air you can paint, clean hard to reach places, and inflate e.g. garden pool. The compressor is equipped with a direct drive, rubber legs and a handle to facilitate changing the position of the device. An additional stand ensures stability of the compressor during operation. Compliance with European safety standards is ensured by the CE certificate.
The 12 litre oil-free compressor, 12K020-1 by NEO TOOLS is an oil-free compressor with a capacity of 12 litres, maximum pressure of 8 bar and 550 watts of power. It requires a 230 V/ 50 Hz power supply. It is characterised by an air intake of 95 l/min and a sound intensity of 65 dB. The oil-free compressor by NEO TOOLS has a powerful induction motor and a ball drain valve. It is recommended for professional workshops, where easy access to connectors, pressure regulation and pressure gauges, as well as the ability to work with a wide range of pneumatic tools - is very important. The convenient handle makes it easy to transport.
The 40 litre, 230 volt, 12K010-1 vertical oil compressor from NEO TOOLS is a 40 litre, 1,500 watt oil type compressor. It requires a power supply of 230 V/ 50 Hz. It features an air intake of 169 l/min, a maximum rpm of 2,850 rpm, a filling time of 152 seconds and a sound intensity of 97 dB. Due to its vertical design, the NEO TOOLS vertical oil compressor takes up little space, retaining the full capacity for this type of equipment. It is recommended for professional workshops, where easy access to connectors, pressure regulation and pressure gauges, as well as the possibility of working with a wide range of pneumatic tools, is very important. The convenient handle makes it easy to transport.
The 24 litre, oil compressor 12K023 by NEO TOOLS is an oil type device with a capacity of 24 litres. The compressor operates at a maximum pressure of 8 bar with 900 watts of power. It is equipped with a drainage valve. It is characterised by a capacity of up to 135 litres per minute. The NEO TOOLS compressor has dimensions of 590 x 255 x 620 mm and a weight of 19.1 kg. The cable length is 1.5 m. The compressor is offered with an oil refill funnel, oil bottle and instructions. Thanks to its compact size, sturdy handle and wheels for easy movement - it is easy to transport. An additional housing protects the unit during use. Allows you to work with pneumatic tools, making wheel inflation simple and efficient. Recommended for both amateur and professional use.
NEO 40l oil compressor (ref. 12K010) with 1500 W power thanks to the vertical positioning of the tank is distinguished by compact dimensions for easy storage. Convenient access to connections, pressure regulation and pressure gauges allows for comfortable use of the compressor. The device will prove useful as an addition to the equipment of a workshop or garage. A convenient handle and wheels facilitate transport. Mains-powered with 230V~50Hz, 40 litres capacity. Can be used as a source of power for an oil gun, for pumping up car wheels and for other small jobs. CE certificate ensures compliance with European safety standards.
The 24 litre oil-free compressor, 12K021-1 by NEO TOOLS is an oil-free type compressor with a capacity of 24 litres, a maximum pressure of 8 bar and a power output of 750 watts. It requires a 230 V/ 50 Hz power supply. It features an air intake of 125 l/min, a filling time of 135 seconds and a sound level of 80 dB. The NEO TOOLS oil-free compressor has a powerful induction motor and a ball drain valve. It is recommended for professional workshops, where easy access to connectors, pressure regulation and pressure gauges, as well as the possibility of working with a wide range of pneumatic tools - is very important. The convenient handle makes it easy to transport.
Oil compressor 150 l, 230 V, 12K031-1 by NEO TOOLS is an oil type compressor with a capacity of 150 litres and a power of 2200 watts. It requires a power supply of 230 V/ 50 Hz. It features an air intake of 330 l/min, a filling time of 574 seconds and a sound intensity of 93 dB. It is recommended for professional workshops, where easy access to couplings, pressure regulation and pressure gauges - as well as the ability to work with a wide range of pneumatic tools - is essential. The convenient handle makes it easy to transport.
The 50 litre, oil compressor 12K024 by NEO TOOLS is an oil type device with a capacity of 50 litres. The compressor operates at a maximum pressure of 8 bar with a power of 1050 W. It is equipped with a drainage valve. It is characterised by a capacity of up to 169 litres per minute. The NEO TOOLS compressor has dimensions of 700 x 325 x 665 mm and a weight of 25.6 kg. The cable length is 1.8 m. The compressor is offered with an oil refill funnel and instructions. Thanks to its compact size, sturdy handle and wheels for easy movement - it is easy to transport. An additional housing protects the unit during use. Allows you to work with pneumatic tools, making wheel inflation simple and efficient. Recommended for both amateur and professional use.
NEO 150 l oil compressor (ref. 12K031) with 2200W. Capacity is 330 l/min. It will prove useful as an addition to the equipment of a workshop or service. The compressor allows connecting various pneumatic tools, due to generated pressure of 10 bar. Compliance with European safety standards is ensured by CE certificate.
The design, the puncture-proof PU foam tires and the transport handle allow easy transport to the place of use
With 1-cylinder / 4-stroke Honda engine for off-grid operation
Due to its independence from the power grid, it is particularly suitable for gardening and landscaping, mobile tire service and breakdown services as well as agriculture and forestry
With idling and speed control, thereby adapting to the respective load conditions
The high-performance gray cast iron unit and the low speed warranty maximum smoothness and a long service life.
The large fan wheel and a cooling air baffle ensure optimum cooling of the compressor.
Stable belt guard made of metal
An aftercooler with large cooling fins ensures a low tank inlet temperature and therefore less moisture in the compressed air
With all safety devices
Ten-year rust-through warranty on powder-coated compressed air tank
Room amenities:
Freewheel valve for less wear
The freewheel valve avoids constant switching on and off
After reaching the set pressure, the valve opens and the compressor runs without pressure
When the pressure drops, the valve closes and the compressor works again on pressure
Service
On the filter pressure regulator, you can fix the working pressure infinitely and remove pressure-reduced and filtered compressed air.
Two pressure gauges show the tank u. Working pressure.
As standard with quality quick coupling and high quality CONDOR pressure switch
Round protection
The frame is at the same time a compressed air tank, holder for tool storage as well as all-round protection for all sensitive components
Optimally protected and transportable with high performance
Eyebolts
With two lifting eyes on the frame for lifting eg with a crane
Transport handle
The two-handed grip allows easy transport to the job site
Shock mounts
Equipped with two large and wide front swinging elements for stable stability
Tool tray
Practical in everyday use as a storage for tools, plans, etc. and as protection against damage from above
High performance aggregate HOS
The precisely machined piston is equipped with a high-alloy piston ring, oil scraper ring and oil scraper ring, which seal the piston from the cylinder wall.
The crankcase is filled with oil, which is sprayed against the cylinder wall with each piston stroke.
The oil scraper wipes the oil-wetted cylinder wall downwards.
PU foam tires
The large, stable wheels with puncture-proof PU foam tires ensure easy and comfortable transport even on uneven ground
Control panel Ergonomically favourably positioned, clearly structured and self-explanatory
manometer to display the tank pressure
direct compressed air output with one-hand safety coupling from the compressed air tank
filter pressure reducer to set the working pressure
manometer to display the set working pressure
compressed air output one hand Safety coupling for filtered compressed air
mist lubricator for metered supply of lubricant to the tools
compressed air outlet one hand safety coupling for filtered and lubricated compressed air
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Thanks to the all-round protection, ideally suited for mounting use
Quality electric motors with high torque and motor start unloading, thus no startup problems
Electric motor equipped with motor protection switch
Fully automatic on-off operation
All transport-vulnerable parts well protected
Rubberized handle against slipping
With all safety devices
In a compact design for a comfortable transport
Ten-year rust-through warranty on powder-coated compressed air tank
Equipment details:
Control panel
The ergonomically designed control panel is clearly structured and self-explanatory.
One manometer each to indicate the tank pressure and the set working pressure
With the pressure regulator, the desired working pressure can be infinitely fixed.
With two compressed air extraction points
Standard with quality quick couplings
Engine
High quality electric motors with high torque
Motor start unloading, thus no startup problems
Electric motor equipped with motor protection switch
Tires
The large, stable wheels in conjunction with the wide wheelbase ensure safe and comfortable transport even on uneven ground.
Protection
Compressor in protected sack cart construction
The fittings are optimally protected against damage by the tubular frame.
Copper-pressure line
Maintenance block
Standard with high quality Condor pressure switch
The on-off switch is protected and easily accessible.
Equipped with quality filter for dirt, oil and condensate separation
Handle
As standard with rubber carrying handle against slipping during transport
High performance aggregate HOS
The precisely machined piston is equipped with a high-alloy piston ring, oil scraper ring and oil scraper ring, which seal the piston from the cylinder wall.
The crankcase is filled with oil, which is sprayed against the cylinder wall with each piston stroke.
The oil scraper wipes the oil-wetted cylinder wall downwards.
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Thanks to the protected hand truck construction, it is ideally suited for daily use on construction sites
Smooth-running, oil-free V-unit
High-quality maximum equipment
One compressed air extraction point each for filtered compressed air, filtered and oiled compressed air and a direct outlet from the tank
The compact hand truck design enables easy transportation. Thanks to the all-round protection, it is ideally suited for daily assembly work. All parts at risk of transport are optimally protected. Smooth, oil-free V-unit
No oil change necessary and no oil in the condensate
Low speed, therefore high Service life
Very quiet running and extremely quiet
High quality coating on the cylinder surfaces and pistons for a long service life
Air flows directly through the cylinder and ensures effective cooling
High-quality maximum equipment
Filter pressure regulator for stepless adjustment of the working pressure with simultaneous dirt and condensate separation
Fog oiler for metered lubrication of the tools
One compressed air extraction point each for filtered compressed air, filtered and oiled compressed air and a direct outlet from the tank
High-quality CONDOR pressure switch
One manometer each for tank and working pressure
Standard with internal protected hose and cable hooks
Quality electrical motor with high tightening torque and motor protection switch
Tool holder
The tool holder above the compressor also protects it during transport
It is also a practical storage for e.g. Tool to use
Suitable for the standard systainers of all electrical tool manufacturers such as: Makita, Festool, Mafell, ...
Convenient transport and a safe stand
Thanks to the optimal frame geometry, one person can transport a staircase
Easy to tilt and drive back-friendly
Puncture-proof PU foam wheels with a wide wheelbase
Compressed air lines and containers with a long service life
Flexible armored hose lines with heat protection prevent vibrations from breaking
Powder-coated compressed air containers
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
