Недавно просмотренные товары
51-3692100
- Two-column guided horizontal saw for sawing solid bars and bar profiles
- Mitsubishi FX 5 control system with simple operation via 4.3" touchscreen
- Cutting movement via hydraulic cylinder
- With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
- Automatic positioning after entering the desired angle
- Hydraulic clamping of the turntable enables precise angular cutting
- Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
- Infinitely variable cutting speed from 15 - 150 m/min
- Saw blade drive via bevel gearbox, asynchronous motor and frequency inverter
- For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
- Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
- Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
- Front band guide moves automatically parallel to the movable vice jaw
- chip clearing brush driven via belt roller
- Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
- More powerful motor optionally available
- Saw blade guides with integrated cooling system
ManufacturerStürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
51-3620303
- two cutting speeds
- Rotatable machine head 45 ° to the left and 45 ° to the right
- Reduction gear running in oil bath
- Automatic membrane coolant pump with standard coolant filter
- Quick-action vise with antigraking device, swiveling 45 ° to the left and 45 ° to the right
- Vise longitudinally displaceable and thus suitable for longitudinal cuts and slits
- Movable guard ensures optimum safety when cutting
- Control handle with safety switch
- Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch and overload protection
- Quality Made in Europe
ManufacturerStürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
51-3621316
- Two cutting speeds
- Rotatable machine head 45 ° to the left and 45 ° to the right
- Reduction gear running in oil bath
- Automatic membrane coolant pump with standard coolant filter
- Quick-action vise with antigraking device, swiveling 45 ° to the left and 45 ° to the right
- Vise longitudinally displaceable and thus suitable for longitudinal cuts and slits
- Movable guard ensures optimum safety when cutting
- Control handle with safety switch
- Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch and overload protection
- Quality Made in Europe
Room amenities - With adjustable friction clutch, which prevents the saw blade from breaking
- MKS 316 R: particularly suitable for machining stainless steel due to slow speeds
ManufacturerStürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
51-3690053
- For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
- Robust band guides with adjustable carbide plates for a precise cut
- Hydraulically controlled system for both clamping vices and the up and down movement of the saw arm
- With chip clearing brush for optimum cleaning and maintenance of the saw band
- Saw arm inclined by 25°, This extends the service life of the saw blade
- BRP - saw blade monitoring
- The jaws of the two clamping vices are equipped with long-stroke hydraulic cylinders as standard, This eliminates the need for pre-setting to the material cross-section to be sawn
- With pivoting cutting gap for mitre adjustment - does not cut into the saw tableMaterial is fed
- via hydraulic cylindersBandsaw blade guides
- with integrated cooling
- systemSwivel plate
- with
- bearingsCutting probe function
- with integrated buttonWith
- digital angle displayWith
- pivoting control panel
ManufacturerStürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
51-3672105
For stable mounting of roller conveyors of the series MRB LC to Metallkraft circular saws. The adapters are specially designed for mounting to the right or left of the saws. Please indicate the machine type of your saw when ordering.
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
