Маркировочные и измерительные инструменты

Veekindel “MULTI-USE" täitesüsi.
Tugev ja mitmekülgne.
Veekindlate märgistuste tegemiseks peaaegu kõigile pindadele.
Ökonoomne: 1 kriit asendab kuni 5 tavalist tindi- või värvimarkerit.
Ei kuiva ära.
Kloriidivaba, märgistamiseks roostevabast terasest pinnale.
Vältida kriidi kasutamist üle 40°C juures!

The Wiha 43798 is a compact, single-pole non-contact voltage tester designed for safe and efficient detection of live AC voltage. It’s ideal for electricians, technicians, and DIY users who need a quick and reliable way to check for voltage without direct contact.

Key Features:

• Voltage detection range: 90–1000 V AC
• Measurement category: CAT IV up to 1000 V
• Optical signal:

          Green LED = ready

          Red LED = voltage detected (visible even in daylight)

• Compact design with pocket clip
• Universal measuring tip for international socket compatibility
• Automatic power-off after 4 minutes of inactivity
• Power supply: 2 × AAA batteries (included)
• Dimensions: 240 × 49 × 29 mm
• Protection class: IP67 (dust and water resistant)
• Operating temperature: –20 °C to +40 °C
• Standards: IEC/EN 61010-1, IEC/EN 61326

The Wiha 45217 Voltage and Continuity Tester is a professional-grade tool designed for safe and versatile electrical testing. It supports:

• Voltage testing: AC (0.5–1000 V) and DC (0.5–1500 V)
• Continuity testing with audible signal
• Rotational field testing
• Single-pole phase testing
• Automatic polarity detection
• Resistance and frequency measurements

It’s ideal for use in photovoltaic systems, e-mobility, and general electrical installations.

Key Features:

• True RMS measurement
• Large LCD display with backlight and LED indicators
• Audible tone for continuity
• Integrated flashlight for low-light environments
• FI circuit breaker test via dual-button load
• One-handed socket testing with integrated spacer
• IP64 protection (dust and splash-proof)
• Compact and ergonomic design

Technical Specifications:

• Voltage range:

        AC: 0.5–1000 V

        DC: 0.5–1500 V

• Resistance: 0–500 kΩ
• Frequency: 40–70 Hz
• Measurement categories:

       CAT IV up to 600 V

       CAT III up to 1000 V

• Operating temperature: –15 °C to +50 °C
• Altitude: up to 2000 m
• Power supply: 2 × AAA batteries (included)
• Dimensions: approx. 282 mm length
• Weight: ~350 g

The Wiha 45216 is a robust and versatile two-pole voltage and continuity tester designed for professional use in electrical installations. It supports a wide range of functions and complies with high safety standards, making it ideal for both residential and industrial environments.

Key Features:

• Voltage measurement:

             AC: 12–1000 V

             DC: 12–1500 V

• Continuity testing with audible signal
• Rotational field indication (LED)
• Single-pole phase testing
• Automatic polarity detection
• FI (RCD) test via dual-button load
• LED display for voltage indication
• Integrated flashlight for low-light conditions
• One-handed socket testing with built-in spacer
• IP64 protection (dust and splash-proof)
• Power supply: 2 × AAA batteries (included)
• Operating temperature: –15 °C to +50 °C
• Altitude: up to 2000 m
• Dimensions: approx. 282 mm length
• Weight: approx. 335 g

Safety & Standards:

• Measurement categories:

              CAT III up to 1000 V

              CAT IV up to 600 V

• Standards: IEC/EN 61243-3:2014

Key Features:

• Voltage range:

          AC: 12–1000 V

          DC: 12–1500 V

• Continuity testing with audible signal
• Rotational field indication (LED)
• Single-pole phase testing
• Automatic polarity detection
• True RMS measurement
• LED scale and illuminated LC display for clear voltage indication
• Integrated flashlight for low-light environments
• Quick one-handed testing with built-in spacer
• Low battery warning on display
• IP64 protection (dust and splash-proof)
• Operating temperature: –15 °C to +40 °C
• Altitude: up to 2000 m
• Power supply: 2 × AAA batteries (included)
• Dimensions: 282 mm length
• Weight: approx. 202 g 

Compliance & Safety:

• Measurement category: CAT IV up to 1000 V
• Standards: EN 61010-1, EN 61243-3:2014
• Contamination level: 2

Specifications:

• Model: TOPEX 39D054
• Type: Electrical voltage tester (contact type)
• Voltage Range: 100–250 V AC
• Length: 190 mm
• Material: Plastic handle, metal probe
• Indication: Optical (light indicator)
• Power Supply: No batteries required
• Protection Class: CE certified, Class II
• Weight: ~30 g
• Dimensions (packaged): approx. 240 × 45 × 20 mm

Features:

• Detects AC voltage in the range of 100–250 V
• Insulated design for safe operation
• Ergonomic, contoured handle for comfortable grip
• Compact and lightweight
• Complies with European safety standards (CE)

Specifications:

• Model: TOPEX 39D055
• Type: Voltage indicator screwdriver
• Voltage Range: 100–250 V AC
• Length: 140 mm
• Tip Type: Flat (slotted)
• Material:

         Handle: Insulated plastic

         Probe: Metal

• Power Supply: No batteries required
• Weight: ~15–27 g
• Compliance: CE certified, meets European safety standards 

Features:

• Detects live AC voltage in the range of 100–250 V
• Compact and lightweight design
• Ergonomic handle for comfortable grip
• Ideal for quick voltage checks in outlets, switches, and wiring
• No need for external power – works directly from the circuit

Specifications:

• Model: TOPEX 39D058
• Type: Voltage indicator screwdriver
• Voltage Range: 125–250 V AC
• Length: 140 mm
• Tip Type: Slotted
• Material:

         Handle: Insulated plastic
         Probe: Metal

• Additional Feature: Integrated work light
• Power Supply: No batteries required – works directly from the circuit
• Certification: CE certified
• Weight: ~20 g 

Features:

• Detects live AC voltage in the range of 125–250 V
• Compact and ergonomic design
• Integrated light for better visibility
• Ideal for quick voltage checks in sockets, switches, and wiring
• Safe and easy to use

Specifications:

• Model: Wiha SoftFinish® Voltage Tester
• Product Code: 34745
• Voltage Range: 110–250 V AC
• Tip Type: Slotted
• Tip Size: 3.0 mm
• Blade Length: 60 mm
• Total Length: 140 mm
• Handle Diameter: 19 mm
• Material: Chrome-vanadium-molybdenum steel, nickel-plated
• Insulation: Molded directly onto the blade
• Standards: DIN 57680-6, GS, CE compliant
• Tested At: 10,000 V AC, approved for 1,000 V AC
• Weight: ~27.5 g
• Application: For detecting AC voltage in low-voltage systems (e.g., sockets, switches)