Metalworking machines

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Maintenance-free motor for reliable operation
• Robust cast iron housing
• Balanced rotor with high-quality ball bearings for a long service life and smooth running
• LED lighting above the grinding wheels for optimum visibility in the work area
• Stable and flexibly adjustable workpiece supports for precise work

• Maintenance-free motor for reliable operation
• Robust cast iron housing
• Balanced rotor with high-quality ball bearings for a long service life and smooth running
• Integrated spark guard on the grinding wheels reduces flying sparks
• Protective discs made of shatterproof material for additional safety
• Non-slip and vibration-damping rubber feet for a stable stand
• Standard equipment with coarse and fine sanding discs (grit 36 and 80)
• LED lighting above the sanding discs for optimum visibility in the work area
• Stable and flexibly adjustable workpiece supports for precise work

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Industrial engine
• Easy to use safety switch according to IP 54
• Digital drilling depth and speed indicator integrated in the housing
• Separate emergency stop impact switch
• Precision Spindle bore
• Safety electronics in 24 V DC
• Guaranteed concentricity measured less than 0.02 mm in the drill quill
• Drill spindle with precision ball bearings
• High quality keyless chuck
• Digital depth gauge
• Precision machined, stable drill table with diagonal T-slots and circumferential cooling water channel
• V-belt cover with safety switch
• One piece cast aluminum die-cast quill lever with softgrip handles
• Large, height-adjustable protective screen with safety switch
• Heavy version of the entire machine

From D 23 Pro

• GATES quality strap

From D 23 Pro / 400 V

• Forward / reverse operation

D 33Pro

• Massive, large base plate with T-slots, strongly ribbed on the back

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• User-friendly safety switch to IP 54
• Separate emergency stop switch
• Measuring scale for drilling depth
• Precisely machined drill table with diagonal T-slots ± 45° tiltable and 360° rotatable
• Solid, large base plate with grooves, heavily ribbed on the back
• Guaranteed concentricity ≤ 0.03 mm measured in the drill spindle
• V-belt cover with safety switch
• Right/left rotation

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• heavy and stable cast iron construction
• asymmetric 3-roller system for easy pre-bending
• swing-out top roller
• Roller drive via hand crank
• suitable for bending wires with the diameters 3, 5 and 8 mm
• quick clamping of the sheet metal by means of a lever

• Note: Please specify when ordering material to be processed!

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Guaranteed concentricity ≤ 0.02 mm measured in the drill spindle
• Drill spindle with precision ball bearing
• Work table adjustable from +45° to -45°

• Guaranteed concentricity ≤ 0.02 mm measured in the drill spindle
• Drill spindle with precision ball bearing
• High-quality quick-action drill chuck
• Large, height-adjustable chuck protection cover
• Work table adjustable from +45° to -45°
• With high practical performance

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Extremely stable construction, entire machine body made of steel
• User-friendly operating concept
• Speed infinitely variable via inverter - Greater ease of operation and no need to replace wearing parts such as V-belts
• Combined micro-spray and blow-off device, for blowing off chips and lubricating the saw blade
• Tiltable working table made of cast iron
• Workplace lighting as standard
• Equipped with motor brake
• Belt tension and speed indicator
• Integrated band welding unit with annealing, cutting and grinding device
• Height adjustment of saw band guide by hand wheel
• VMBS I E models with electric table feed

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Heavy, robust welded construction
• Splitter-guided upper beam with adjustable flat guides
• Manual cutting gap adjustment at the front of the machine
• LED cutting line illumination and elongated holes in the top cover for an optimal view of the cutting edge and for cutting on tear-off
• Solid 90° side stop with 1000 mm length, T-slot, tilting cam and scale
• Two solid sheet support arms with T-slots and tilting cams
• Motorized, NC-controlled backgauge with 750 mm travel range
• Backgauge drive with frequency converter, motor with brake and recirculating ball screws
• High-quality, rotatable knives suitable for cutting stainless steel
• Heavy hold-down beam with gentle rubber inserts
• Rear area protected by light curtain
• Operation via mobile foot pedal console with emergency stop

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Heavy, solid cast design
• Dirt and water-resistant, easy-to-clean membrane keypad
• 24V DC electronics
• Machine light
• Drilling depth stop
• Solid base plate with precise surface finish
• Coolant device, chip filter
• Tapping device
• Extremely stable, thick-walled cast column

Equipment

• Electrically operated quill feed
• Oil pump
• Programmable feed cut-off
• Easy-to-read digital display
• Digitally adjustable drilling and thread depth
• Digital zero point can be set

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• For comfortable reading of the set values ​​via 1/10 mm LED display
• Receives the input signals via a magnetized pole ring and a sensor head mounted directly on the drive shaft
• Measuring accuracy is ± 0.2 mm per meter
• Easy to read

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Thin sheets are supported in order to be able to apply dimensionally to the backgauge
• pneumatic sheet holding device with selector lever for the direction of the sheet metal chute
• Operator can choose if the section falls into the back room or the operator side

• Pneumatic sheet support, sheet ejection to the front or rear controllable via toggle switch
• Backgauge 750 mm guided on round shafts and driven via ball screw
• Stainless steel table supports with transfer balls for comfortable material handling
• Positioning control of the backgauge Maper HT071 with digital dimension display
• Heavy and robust steel construction in welded design
• Constant, low cutting angle for optimum cutting results
• Side fence 1000 mm with scale and T-slot
• Two material support arms 500 mm with T-slot
• Balls in the support table for easier material transport
• Cutting gap adjustment by means of vernier rings
• High quality blade suitable for stainless steel
• LED illumination of the cutting area
• Continuous finger protection device
• Mobile foot pedal with emergency stop switch
• All moving parts with low-maintenance bearings
• Electrical system from Siemens and Schneider

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Extremely stable construction, entire machine body made of steel
• User-friendly operating concept
• Speed infinitely variable via inverter - Greater ease of operation and no need to replace wearing parts such as V-belts
• Combined micro-spray and blow-off device, for blowing off chips and lubricating the saw blade
• Tiltable working table made of cast iron
• Workplace lighting as standard
• Equipped with motor brake
• Belt tension and speed indicator
• Integrated band welding unit with annealing, cutting and grinding device
• Height adjustment of saw band guide by hand wheel
• VMBS I E models with electric table feed

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Low-wear brass guide
• Weldon and MK mount

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Heavy, solid cast construction
• Smooth running due to polished gear wheels running in oil bath
• Two-stage industrial electric motor
• Tapping function
• Gear head and table can be adjusted in height
• Large speed range of 95 - 3,200 rpm through 12 switchable speeds
• Large dimensioned, solid drilling table, precisely worked with diagonal T-slots and circumferential cooling water channel; strongly ribbed on the reverse and double clamped
• Depth stop
• Height-adjustable feed guard with micro-switch for the utmost protection of the user
• Coupling for switching from manual coarse feed to manual fine feed
• Thick-walled cast-iron column for high power absorption and stability
• Solid precision surface machined base plate; by pivoting away the drill table can be used as a work surface for particularly high workpieces

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Heavy and stable cast iron construction
• handy and easy
• adjustable sub-waves
• steel shafts
• adjustable stop plate

Please specify when ordering material to be edited!

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For use in industry and trade
• Heavy and stable cast iron construction
• Asymmetrical 3-roller system
• Upper roller swung out, thereby easy removal of the finished workpiece
• Easily adjustable upper and lower roller
• The foot control leaves both hands free for the material supply
• User-friendly
• Powerful 400 volt engine
• Optionally available: hardened rollers

Hints:

• When ordering, please specify the type of material to be processed!
• All accessories only possible ex works.

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Powerful motor and vibration-free operation for the best sanding results
• Continuous face sanding surface thanks to removable attachments enables sanding of even long workpieces
• Quick clamping system enables fast sanding belt changes
• One extraction nozzle each directly on the spark box and on the rear belt roller
• Can be used with and without suction
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective screen

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de