Metalworking machines

• Precisely manufactured
• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose better than 0.009 mm
• Rolled trapezoid spindles
• Leadscrew stored in two sintered bearings
• Two tapered roller bearings in P5 quality
• Precisely crafted sled
• Handwheels with adjustable fine scale 0.04 / 0.01 mm
• Quadruple tool holder
• All guides can be adjusted by wedge strips
• Concentricity - chuck better than 0.05 mm
• Lead screw for thread cutting or automatic longitudinal turning
• Right / left rotation in the control panel switchable
• Tailstock for taper turning ± 5 mm adjustable
• Tailstock quill and handwheel with adjustable fine scale 0.02 mm
• Fast, easy and tool-free adjustment by means of a clamping lever
• Emergency stop impact switch
• thrust bearing
• Extensive accessories
• 3-jaw lathe chuck in the standard scope of delivery
• Stable value

TU 2406V

• Speed change easily adjustable via potentiometer
• Digital speed display
• EMC filter class C1

• Solid design made from high-quality Meehanite cast iron
• High concentricity due to tapered roller bearing, ≤ 0.01 mm measured in the sleeve
• X- and Z-axis with adjustable 55° dovetail guide
• Y-axis with adjustable flat guide
• Coolant device
• Solid and generously dimensioned cross table, precisely surface-finished with adjustable end stops
• Drilling/milling head can be tilted ± 45
• Automatic quill feed, 3-stage 0.04 - 0.15 mm/rev
• Precision micro feed
• Adjustable drilling depth stop with millimeter scale, readable from the front
• Right/left rotation
• Infinitely variable speed control
• Milling spindle with precision bearing
• Mechanical spindle brake
• Height-adjustable protective screen with microswitch, against flying chips and parts, for maximum protection of the user

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

• Precise processing
• Powerful, maintenance-free engine
• Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
• Smooth-running feed gear with rounded gears running in an oil bath
• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose better than 0.009 mm
• Concentricity on the lathe chuck better than 0.04 mm
• Automatic longitudinal / lead screw drive
• Lead screw for thread cutting or automatic longitudinal turning
• Quadruple tool holder
• All guides can be adjusted by wedge strips
• Right / left rotation in the control panel switchable
• Hardened main spindle mounted in adjustable precision tapered roller bearings
• Tapered roller bearings in P5 quality
• Hardened spindle nose with Ø 26 mm spindle bore
• Rolled trapezoid spindles
• Chip protection on the upper slide
• Upper slide on cross slide slidable
• Tailstock for taper turning ± 5 mm adjustable
• Tailstock quill and handwheel with adjustable fine scale 0.02 mm
• Fast, easy and tool-free adjustment by means of a clamping lever
• Leadscrew stored in two sintered bearings
• Change gear set in standard scope of supply for thread cutting
• Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
• thrust bearing
• 3-jaw lathe chuck in the standard scope of delivery
• Emergency stop impact switch
• Fully equipped, allowing the user to be productive immediately after commissioning

TU 2807V

• Quiet, powerful and brushless DC drive with excellent control characteristics
• High precision steel lining for higher speeds
• Speed change easily adjustable via potentiometer
• Digital speed display

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

• Machine bed made of heavily ribbed cast iron
• One-piece machine base made of steel
• High rigidity of the headstock housing due to heavily ribbed 25GG casting
• Precisely machined slide
• Shafts on needle bearings, all components are lubricated in an oil bath
• Bed guides hardened and precision ground
• All electronic controls can be reached centrally
• All gear wheels of the feed gear made of hardened steel
• Handwheels decoupled and tested in accordance with EN 23125
• Two-channel safety electronics
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Complete lead and pull spindle cover
• Complete illumination of the work area
• Service-friendly removable rear panel
• Hardened and ground face spindle ensures enormous accuracy and durability
• High chip removal during roughing is no problem thanks to the high cutting capacity
• Energy chain for gentle cable and hose guidance
• Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
• No change wheels necessary
• With safety device to prevent simultaneous operation of tapping and feed mechanism
• Electronic feed switch-off of the Z-axis
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
• Electric position switch-off with quadruple position stop
• Three-jaw lathe chuck included as standard
• Quick-change steel holder SWH 7-C
• Steel holder 32 x 130 type D for square chisel 25 mm
• Large spindle bore
• 
  Manufacturer
  Optimum Maschinen Germany GmbH
  Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
  info@optimum-maschinen.de
  
  

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

• Machine bed made of heavily ribbed cast iron
• One-piece machine base made of steel
• High rigidity of the headstock housing due to heavily ribbed 25GG casting
• Precisely machined slide
• Shafts on needle bearings, all components are lubricated in an oil bath
• Bed guides hardened and precision ground
• All electronic controls can be reached centrally
• All gear wheels of the feed gear made of hardened steel
• Handwheels decoupled and tested in accordance with EN 23125
• Two-channel safety electronics
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Complete lead and pull spindle cover
• Complete illumination of the work area
• Hardened and ground face spindle ensures enormous accuracy and durability
• High chip removal during roughing is no problem thanks to the high cutting capacity
• Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
• Service-friendly removable rear panel
• No change wheels necessary
• With safety device to prevent simultaneous operation of tapping and feed mechanism
• Electronically braked motor
• Electronic feed cut-off of the Z-axis
• Electrical position switch-off with quadruple position stop
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Three-jaw lathe chuck included as standard
• Large spindle bore

• Precise processing
• Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
• Hardened and ground Z-axis guideway
• Smooth-running feed gear with rounded gears running in an oil bath
• Guaranteed concentricity of the spindle nose better than 0.009 mm
• Concentricity on the lathe chuck better than 0.04 mm
• Quadruple tool holder
• All guides can be adjusted by wedge strips
• Right / left rotation in the control panel switchable
• Hardened main spindle mounted in adjustable, precision tapered roller bearings
• Tapered roller bearings in P5 quality
• Hardened spindle nose
• Large spindle bore Ø 38 mm
• Lead screw for thread cutting or automatic longitudinal turning
• Guide and feed shaft stored in two sintered bearings
• Automatic longitudinal / flat feeds
• Lead screw and tension spindle cover
• Tailstock for taper turning ± 5 mm adjustable
• Tailstock quill and handwheel with adjustable fine scale 0.02 mm
• Fast, easy and tool-free adjustment by means of a clamping lever
• Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
• Change wheel set in the standard scope of supply for thread cutting
• Emergency stop impact switch

TU 3008

• fan belt

TU3008G

• transmission

TU 3008V

• V-belt and brushless drive
• Quiet, powerful and brushless DC drive with excellent control characteristics
• High precision steel lining for higher speeds
• Digital speed display
• Power supply 230 V

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose ≤ 0.015 mm
• Spindle holder Camlock DIN ISO 702-2 No. 8
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using gibs
• Right/left rotation on bed slide switchable via switching spindle
• Two-channel safety electronics
• Central lubrication in the bed slide
• Upper slide adjustment range ± 90
• Main spindle runs in oil bath
• Shafts and wheels running in oil bath
• Gear wheels smooth-running, hardened, ground and mounted with 2 adjustable precision tapered roller bearings
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with disengagement function in accordance with EN23125 in the X and Z axes
• Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
• Clearly arranged selector lever for switching the feed speeds
• Closed design of the high-speed feed gearbox
• Emergency stop impact switch, motor protection switch, lockable main switch
• Emergency stop device with foot actuation
• Tailstock for taper turning ± 10 mm adjustable
• Tailstock quill and handwheel with adjustable fine scaling 0.025 mm. Quick, easy and tool-free adjustment by means of clamping lever
• Energy chain for gentle cable and hose guidance
• Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Adjustable scale of the thread gauge

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose ≤ 0.015 mm
• Shafts, wheels and main spindle run in an oil bath
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using gibs
• Mechanical longitudinal feed cut-off of the bed slide with four adjustable eccentrics
• Right/left rotation on the bed slide switchable via switching spindle
• Two-channel safety electronics
• Central lubrication in the bed slide
• Upper slide adjustment range ± 90
• Smooth-running gear wheels, hardened and ground, mounted on 2 adjustable precision tapered roller bearings
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Large chip guard with integrated LED machine lamp
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with disengagement function in accordance with EN23125 in the X and Z axes
• High-speed feed gearbox in closed design, gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
• Scale of the threaded clock adjustable
• Tailstock for taper turning adjustable ± 10 mm
• Tailstock quill and handwheel with adjustable fine scale 0.025 mm
• Quick, easy and tool-free adjustment of the tailstock using a clamping lever
• Cable routing via energy chain
• Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Emergency stop device with foot actuation

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

• Precise processing
• Heavily ribbed prism bed made of cast steel, inductively hardened and precision ground
• Hardened and ground Z-axis guideway
• Hardened spindle nose (DIN 6350)
• Guaranteed concentricity of the spindle nose better than 0.009 mm
• Automatic longitudinal / lead screw drive
• Roll-rolled trapezoidal thread of the lead screw
• Leadscrew stored in two sintered bearings
• Longitudinal, top and top slides
• Right / left rotation in the control panel switchable
• Hardened main spindle mounted in adjustable precision tapered roller bearings
• Tapered roller bearings in P5 quality
• Cylindrical center mount
• Hardened spindle nose with Ø 21 mm spindle bore
• Chuck concentricity better than 0.04 mm
• Tailstock adjustable for bow turning
• Tailstock quill and handwheel with adjustable fine scale 0.02 mm
• Fast, easy and tool-free adjustment by means of a clamping lever
• Emergency stop impact switch
• Lathe chuck protection
• thrust bearing
• Change gear
• Quadruple steel holder, rotatable
• Replacement gear set in the standard scope of delivery enables large thread cutting area
• 3-jaw lathe chuck in the standard scope of delivery
• EMC filter class C1

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting