Powerful and quiet drive via LENZE gear motors with brake
Compact, heavy and stress-free welded steel construction
Sharp bending rail made of tool steel C50 at the clamping cheek
Continuous, exchangeable bed support made of tool steel C50
Continuous bending rail made of tool steel C50 at the bending beam
Automatic pressure regulation of the clamping cheek via motor current pick-up
Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
Bending angle adjustment PT 1 via potentiometer on the machine front (right)
Manual fine adjustment of bending beam with scale
Manual crowning via pressure screws in the bending beam
Foot remote control with emergency stop function
All moving parts with low-maintenance bearings
Electrical components from Schneider or Omron
SH-models with high, segmented goat's foot tools
Quality Made in Europe
Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened
For stable mounting of roller conveyors of the series MRB LC to Metallkraft circular saws. The adapters are specially designed for mounting to the right or left of the saws. Please indicate the machine type of your saw when ordering. Manufacturer Stürmer Maschinen GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@stuermer-maschinen.de
Two-column guided horizontal saw for sawing solid bars and bar profiles
Mitsubishi FX 5 control system with simple operation via 4.3" touchscreen
Cutting movement via hydraulic cylinder
With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
Automatic positioning after entering the desired angle
Hydraulic clamping of the turntable enables precise angular cutting
Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
Infinitely variable cutting speed from 15 - 150 m/min
Saw blade drive via bevel gearbox, asynchronous motor and frequency inverter
For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
Front band guide moves automatically parallel to the movable vice jaw
chip clearing brush driven via belt roller
Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
Two-column guided band saw for sawing solid bar material and bar profilesMitsubishi
FX 5 control system with simple operation via 4.3" touchscreenCutting movement
via hydraulic cylindersWith
BRP (cutting feed control): if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continuesRobust
machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performanceInfinitely variable
cutting speed from 15 - 150 m/minSaw blade drive
via bevel gearbox, Asynchronous motor and frequency converterClamping
of the material in front of and behind the cut by means of a two-part vicePressure adjustment
of the hydraulic vice clamping via control valve with pressure gaugeSaw blade inclination
of 7° and hydraulic saw blade tensioning increase the service life of the saw
bladeFront
blade
guide moves automatically parallel to the moving
saw blade
Band guide moves automatically parallel to the moving vice jawElectrically
driven chip clearing brushEmulsion cooling
with liquid distribution into the saw band guides and directly into the cutting channelMore powerful
Powerful and quiet drive via LENZE gear motors with brake
Compact, heavy and stress-free welded steel construction
Sharp bending rail made of tool steel C50 at the clamping cheek
Continuous, exchangeable bed support made of tool steel C50
Continuous bending rail made of tool steel C50 at the bending beam
Automatic pressure regulation of the clamping cheek via motor current pick-up
Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
Bending angle adjustment PT 1 via potentiometer on the machine front (right)
Manual fine adjustment of bending beam with scale
Manual crowning via pressure screws in the bending beam
Foot remote control with emergency stop function
All moving parts with low-maintenance bearings
Electrical components from Schneider or Omron
SH-models with high, segmented goat's foot tools
Quality Made in Europe
Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened
Semi-motor version - manual operation of the upper cheek, bending process motorised
Designed for professional use
With foot operation
heavy, compact weldment
With continuous sharp bending rail
Standard with manual adjustment of the bending angle by means of nonius ring
Particularly low-maintenance
S-models with segmented top tools
SH models with high, segmented goat foot tools
Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
Further swivel bending machines available on request
Quality Made in Europe Manufacturer Stürmer Maschinen GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@stuermer-maschinen.de
No need to set the upper end point with the cut-off button
Efficient coolant application on the saw band guides
Monitoring of the saw blade run by BRP system
Monitoring the saw blade tension
Longer service life of saw blade due to saw arm inclination of 25 °
For sawing pipes and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
Mitre adjustment from -45° to +60°, user-friendly adjustment from the front for better handling, especially with attached roller conveyor
Bearing-mounted turntable
Infinitely variable adjustment of the belt speed
Robust belt guides with adjustable carbide plates for a precise cut
Longer service life of the saw blade thanks to 25° saw arm inclination
Saw blade guides with integrated cooling system
BRP saw blade monitoring stops the feed of the saw frame if the saw blade motor is overloaded by chips in the cutting channel; once the chips have been removed by the running saw blade, the feed continues automatically
Electromechanical monitoring of the saw blade tension, a microswitch switches the machine off in the event of deviations
Chip clearing brush for optimum cleaning and maintenance of the saw blade
Hydraulic clamping vice
Saw frame can be lowered hydraulically
With swivel-mounted control panel
Cut sensing function with integrated button
Functionality of the semi-automatic machine:
Automatic workpiece clamping after the start of the cutting cycle
Execution of the saw cut at the selected belt speed
Automatic stop of the lowering movement and the saw blade in the lower end position
Automatic return of the saw arm to its upper end position
