Недавно просмотренные товары
51-3432447
- Machine bed made of heavily ribbed cast iron
- One-piece machine base made of steel
- High rigidity of the headstock housing due to heavily ribbed 25GG casting
- Precisely machined slide
- Shafts on needle bearings, all components are lubricated in an oil bath
- Bed guides hardened and precision ground
- All electronic controls can be reached centrally
- All gear wheels of the feed gear made of hardened steel
- Handwheels decoupled and tested in accordance with EN 23125
- Two-channel safety electronics
- Switch with life cycle calculation, tested in accordance with EN ISO 13849
- Complete lead and pull spindle cover
- Complete illumination of the work area
- Service-friendly removable rear panel
- Hardened and ground face spindle ensures enormous accuracy and durability
- High chip removal during roughing is no problem thanks to the high cutting capacity
- Energy chain for gentle cable and hose guidance
- Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
- No change wheels necessary
- With safety device to prevent simultaneous operation of tapping and feed mechanism
- Electronic feed switch-off of the Z-axis
- Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
- Electric position switch-off with quadruple position stop
- Three-jaw lathe chuck included as standard
- Quick-change steel holder SWH 7-C
- Steel holder 32 x 130 type D for square chisel 25 mm
- Large spindle bore
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
51-3425001
- Precisely manufactured
- Powerful, maintenance-free engine
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose ≤ 0.009 mm
- Concentricity on the lathe chuck ≤ 0.04 mm
- Lead screw for thread cutting or automatic longitudinal turning
- Leadscrew stored in two sintered bearings
- All guides can be adjusted by wedge strips
- Right / left rotation in the control panel switchable
- Rolled trapezoid spindles
- Thrust bearing
- Tapered roller bearings in P5 quality
- Hardened main spindle mounted in adjustable precision tapered roller bearings
- Hardened spindle nose with Ø 26 mm spindle bore
- Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
- Upper slide on cross slide slidable
- Chip protection on the upper slide
- Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
- Tailstock for taper turning ± 5 mm adjustable
- Tailstock quill and handwheel with adjustable fine scale 0.02 mm
- Quick, easy and tool-free adjustment of the tailstock by a clamping lever
- Emergency stop impact switch
- Quadruple tool holder
- 3-jaw lathe chuck in the standard scope of delivery
- Change gear set in the standard scope of delivery for thread cutting
- Fully equipped, allowing the user to be productive immediately after commissioning
- TU 2506VB: Speed change easily adjustable via potentiometer
ManufacturerOptimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
51-3462070
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose better than 0.015 mm
- Spindle holder Camlock DIN ISO 702-2 No. 6
- Lead screw cover
- Precisely machined slide
- All guides can be adjusted using wedge strips
- Right/left rotation on bed slide switchable via switching spindle
- Two-channel safety electronics
- Central lubrication in the bed slide
- Upper slide adjustment range ± 90
- Main spindle runs in oil bath
- Smooth-running gear wheels, hardened and ground with 2 adjustable precision tapered roller bearings
- Switch with life cycle calculation, tested in accordance with EN ISO 13849
- All metric pitches in the range from 0.2 to 14 mm/rev and all inch threads in the range from 72 - 2 threads per inch can be adjusted without replacing the change gears using the switch lever in the control panel
- Handwheels with adjustable fine scaling 0.04 / 0.02 mm
- Safety handwheels with disengagement function according to EN23125 in the X- and Z-axis
- Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
- Coolant system with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
- Substructure and machine bed cast in one piece from Meehanite cast iron
- Emergency stop device with foot actuation
- Quadruple steel holder
ManufacturerOptimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
51-3427206
- Precise processing
- Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
- Hardened and ground Z-axis guideway
- Smooth-running feed gear with rounded gears running in an oil bath
- Guaranteed concentricity of the spindle nose better than 0.009 mm
- Concentricity on the lathe chuck better than 0.04 mm
- Quadruple tool holder
- All guides can be adjusted by wedge strips
- Right / left rotation in the control panel switchable
- Hardened main spindle mounted in adjustable, precision tapered roller bearings
- Tapered roller bearings in P5 quality
- Hardened spindle nose
- Large spindle bore Ø 38 mm
- Lead screw for thread cutting or automatic longitudinal turning
- Guide and feed shaft stored in two sintered bearings
- Automatic longitudinal / flat feeds
- Lead screw and tension spindle cover
- Tailstock for taper turning ± 5 mm adjustable
- Tailstock quill and handwheel with adjustable fine scale 0.02 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
- Change wheel set in the standard scope of supply for thread cutting
- Emergency stop impact switch
- Speed change easily adjustable via potentiometer
- Digital speed display
- EMC filter class C1
ManufacturerOptimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
