НОВЫЕ ПРОДУКТЫ

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Stop track with length stop, manual measuring system with mm scale and reading magnifier
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• Maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Stable construction
• For quick rectangular notching of metal sheets
• User-friendly and energy-saving thanks to pneumatic drive
• Solid table with recessed scales and T-slots for precise adjustment of the pivotable stops
• Finger protection cover made of Plexiglas for optimum view of the cutting edge
• Operation via foot pedal

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Control with 49 programs with each 99 possible individual steps
• Two cutting speeds
• Machine head guided vertically, with dovetail guide and adjustable wedge strip
• Machine head can be swiveled 45° to the left and 45° to the right, with locking at 45°, 0°, -45°
• Stable and robust construction
• Simple and intuitive operation
• Adjustable depth stop for the vertical stroke of the saw head
• Reduction gear, silent in oil bath running
• Coolant pump with coolant filter
• Coolant distribution for better lubrication
• Transversely movable hydraulic quick-action vice with anti-jaw device
• Chip breaker T6 for blade cleaning
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch, undervoltage release and overload protection
• Quality Made in Europe

Mode of operation automat

• Material feed
• Closing the vice and activating the motor
• Activation of the coolant pump and lowering of the saw head for cutting
• Return of the feed carriage to the specified dimension
• Return of the saw head to starting position
• Opening the vise
• Repeat cycle

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For low-burr sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant
• Application e.g. in metal construction, joineries, interior fitters etc.
• Angle for miter cuts right 45°
• Motor with soft start

• For low-burr sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant
• Application e.g. in metal construction, joineries, interior fitters etc.
• Angle for mitre cuts right 45°
• Easy to transport
• Motor with soft start for easier handling when switching on the saw
• Vice with quick adjustment
• Secure stand thanks to die-cast aluminum base
• Extremely stable and robust construction

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Integrated exhaust system with aluminum fan and self-cleaning blades
• Dust bag made of self-extinguishing tissue
• Sturdy base with water bowl

• Heavy industrial grinding machine absorbs the high self-weight
  anyway low vibrations
• Also suitable for very strong shear forces on the grinding wheels
• Maintenance-free, durable induction motor with smooth running
• Housing made of cast iron
• spark protection
• Stable, adjustable workpiece support
• Grinding wheels not included in the standard delivery

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• For precision surface grinding
• Maximum stiffness and stability thanks to tension-free re-heated and hardened cast iron construction
• High-quality spindle with precision cone roller bearings (circular accuracy 2 microns)
• Electromagnetic clamping plate for fixing the workpiece including automatic demagnetization function
• Automatic central lubrication for all slides and spindles
• Hand scraped and Turcite-B-coated V-flat guides guarantee extremely uniform, low-friction movement and highest precision
• Halogen working light dustproof, completely contact-proof and protected against jet water according to IP65
• Second grinding wheel flange included in delivery

Automatic feed control AD 5
The fsM series models are equipped with automatic feed control (AD 5). Different grinding cycles are available: surface loops with delivery at the starting point, groove loops with delivery at the starting point, groove loops with delivery at the start and end points. The delivery of the grinding wheel can be individually designed depending on the workpiece. The total grinding size is divided into coarse and fine delivery, the delivery steps can be freely entered, depending on the application, with a minimum resolution of up to 0.001mm. The possibility to program dead runs after a certain number of delivery steps as well as passages for firing after reaching the grinding measure provides the best grinding results.
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

Available on request

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

Quality Made in Europe
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Precisely processed
• High concentricity due to tapered roller bearings ≤ 0.015 mm measured in the sleeve
• Motor with two-stage gear ratio for powerful transmission of motor power
• Powerful DC motor with permanent current monitoring
• Air filter for motor
• New electrical system with improved motor protection (extended circuit board and circuit board for EMC)
• Safety electrics in 24 volt version
• Control electronics with integrated relay control
• Massive and generously dimensioned cross table, precisely surface-machined with T-slots and adjustable gibs
• Adjustable end stops
• Stable dovetail guide with adjustable gibs
• Adjustable and readjustable feed spindle play
• Emergency stop switch
• Drilling/milling head can be tilted by ±60
• Right/left rotation
• Machine lamp
• Double-row angular contact ball bearings in the axes, adjustable without play
• Height-adjustable protective screen with microswitch, against flying chips and parts, for maximum protection of the user
• Preparation for mounting the DRO5 digital position indicator in the X and Y axes (prepared groove for retrofitting the magnetic strips)
• Lockable main switch

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Motorised height adjustment of the work table
• Conveyor table with profile conveyor belt for optimum stability during transportduring processing
• NC control with 8" touch screen
• With wet cooling for effective heat reduction of small parts or for machining with slow feed rate
• Equipped with parts dryer to prevent corrosion and ensure fast further processing
• Cleaning of cooling water in external filter

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

Available on request

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Quality Made in Europe

Note on technical data
For bending stainless steel, optional hardening of the tools is required
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Extremely stable construction, entire machine body made of steel
• User-friendly operating concept
• Speed infinitely variable via inverter - Greater ease of operation and no need to replace wearing parts such as V-belts
• Combined micro-spray and blow-off device, for blowing off chips and lubricating the saw blade
• Tiltable working table made of cast iron
• Workplace lighting as standard
• Equipped with motor brake
• Belt tension and speed indicator
• Integrated band welding unit with annealing, cutting and grinding device
• Height adjustment of saw band guide by hand wheel
• VMBS I E models with electric table feed

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Adjustable offset
• Hardened and ground spindle
• Long spindle guide
• High force at the end of stroke
• Honed ram guide and ground rams ensure a long service life and precise guidance
• Quick changeover thanks to simple and safe adjustment of the working height
• Ground press tables allow reproducible positioning of your tools
• Locating holes in the ram and table plate for precise alignment of the tools
• Support table with T-slots for attaching workpiece clamping fixtures
• PD5 with locking function
• PD5 and PD8 with spindle for height adjustment

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

For stable mounting of roller conveyors of the series MRB LC to Metallkraft circular saws. The adapters are specially designed for mounting to the right or left of the saws. Please indicate the machine type of your saw when ordering.
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

Available on request

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

Quality Made in Europe
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For steel
• Reduction gear, silent in oil bath running
• automatic membrane coolant pump with standard coolant filter
• movable protection device ensures optimum safety when cutting
• Control handle with safety switch
• electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector and overload protection
• Machine head rotatable by 45 ° on both sides
• 45 ° swiveling quick-action vice on both sides
• Quick-action vise with double clamping device guarantees a precise and low-profile cut
• Quality Made in Europe

Room amenities:

• 45 ° swiveling quick-action vice on both sides

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Two-column guided horizontal saw for sawing solid bars and bar profiles
• Mitsubishi FX 5 control system with simple operation via 4.3" touchscreen
• Cutting movement via hydraulic cylinder
• With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
• Automatic positioning after entering the desired angle
• Hydraulic clamping of the turntable enables precise angular cutting
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency inverter
• For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• chip clearing brush driven via belt roller
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
• Robust saw blade guide with adjustable carbide plates for a precise cut
• Robust upper saw blade guide with linear guide
• Saw blade inclined by 7
• Automatic band guide adjustment
• Doors open sideways, making it easier to change the saw blade
• Material is tensioned before and after the cut
• Additional hydraulic cutting pressure regulation
• Infinitely variable adjustment of the saw blade speed from 20 - 100 m/min
• Cut sensing function with integrated button
• With frequency converter for infinitely variable adjustment of the saw blade speed
• Automatic blade guide adjustment
• Hydraulic cutting pressure regulation
• Material feed 490 mm
• Hydraulic band tensioning device
• Mechanically driven chip brush
• Saw band guides with integrated cooling system

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• For sanding surfaces, edges and rounding off
• Heavy, durable industrial design with maintenance-free motor
• Long service life and smooth running thanks to balanced rotor with quality ball bearings
• Large surface sanding area thanks to fold-away upper sanding belt cover
• One extraction nozzle on the spark box and one on the rear belt roller
• Quick sanding belt change thanks to quick-release system
• Includes practical storage surface, e.g. for safety goggles

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Grinding belt change in seconds due to the quick-tensioning system
• Easy adjustment of the belt run
• Automatic re-tensioning of the sanding belt by spring-supported belt tensioning system
• Infinitely tiltable sanding unit
• One belt speed each for grinding steel and stainless steel

• Powerful motors and vibration-free operation for the best sanding results
• Quick sanding belt change in seconds thanks to quick-release system
• Large surface sanding area thanks to fold-away upper sanding belt cover
• Continuous sanding surface after removal of attachments enables sanding of long workpieces too
• Can be used with and without extraction
• One extraction nozzle on the spark box and one on the rear belt roller
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective disk
• MBSM 75-240-2 and 150-240-2 models with two belt speeds for sanding steel and stainless steel

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

Available on request

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de