Поиск

Для зарегистрированных клиентов скидка до-10% 

Показывать цены с налогами
RU
Все категории
    Меню Закрыть

    Для зарегистрированных клиентов скидка до-10% 

    НОВЫЕ ПРОДУКТЫ

    Сортировать по
    Показать по на странице
    Sabre saw blade, HCS, 150 x 19 x 1.3 mm, 3TPI, cpl. 2 pcs.
    03-58041
    Sabre saw blade, HCS, 150 x 19 x 1,3 mm, 3 TPI, set of 2 pieces 58-041 by NEO TOOLS is a set of 2 sabre saw blades made of HCS, with 3 TPI toothing and a stroke of 8,5 mm. The tools have dimensions of 150 x 19 x 1.3 mm. They are designed for branches and wood without nails (20-100 mm) - they also work well for cutting fresh wood (diameter <100 mm). The design of the NEO TOOLS blades allows for plunge, coarse and curved cutting, making quick maintenance and carpentry work easier.
    4,40€
    На заказ
    S1 SR work boots, ESD, composite toecap, size 45
    03-8217845
    NEO TOOLS' S1 SR, ESD, composite toecap, size 45, 82-178-45 work boots are made of rip-stop knitted upper and mesh knitted lining, and the HI-POLY foam insole used increases their comfort. The EVA and rubber sole meets FO (petrol and oil resistance) and SR (slip resistance on SLS solution-coated ceramic ground) requirements. The shoes are also equipped with a composite toecap and have ESD anti-electrostatic properties to dissipate electrical charges in the range of 0.75 MΩ to 35 MΩ. The footwear is made in the S1 FO SR category, is CE certified and is designed for use in industries including electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical. Available in sizes 39 to 47.
    67,29€
    На заказ
    S1 SR work boots, ESD, composite toecap, size 43
    03-8217843
    NEO TOOLS' S1 SR, ESD, composite toecap, size 43, 82-178-43 work boots are made with a rip-stop knitted upper and a knitted mesh lining, and the HI-POLY foam insole used increases their comfort. The EVA and rubber sole meets FO (petrol and oil resistance) and SR (slip resistance on SLS solution-coated ceramic ground) requirements. The shoes are also equipped with a composite toecap and have ESD anti-electrostatic properties to dissipate electrical charges in the range of 0.75 MΩ to 35 MΩ. The footwear is made in the S1 FO SR category, is CE certified and is designed for use in industries including electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical. Available in sizes 39 to 47.
    67,29€
    На заказ
    Desk fan 45W
    03-90016
    The 45 W desk fan 90-016 by NEO TOOLS is a useful device with a power of 45 W, which is powered by 230 V ~ 50 Hz. It has automatic horizontal oscillation and mechanical vertical oscillation, allowing you to adjust the direction of the wind. The fan is equipped with three operating speeds, a carrying handle and a 1.66 m power cord. The blade diameter is 141 mm and the grille diameter is 202 mm. The NEO TOOLS desk fan has an aluminium motor and is designed to ventilate and keep rooms cool.
    36,51€
    На заказ
    Impact bits TX10/15/20/25/30/40 x 25 mm, 6 pcs.
    03-56541
    Impact bits TX10/15/20/25/30/40 x 25 mm, 6 pieces 56-541 by NEO TOOLS type TX10, TX15, TX20, TX25, TX30, TX40 with a length of 25 mm. Equipped with a ¼" HEX handle and recommended for heavy-duty work with high torque, using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. Six pieces are offered in the set - for professionals and DIY enthusiasts.
    3,79€
    На заказ
    S1 SR work boots, ESD, composite toecap, size 41
    03-8217841
    NEO TOOLS' S1 SR, ESD, composite toecap, size 41, 82-178-41 work boots are made of rip-stop knitted upper and mesh knitted lining, and the HI-POLY foam insole used increases their comfort. The EVA and rubber sole meets FO (petrol and oil resistance) and SR (slip resistance on SLS solution-coated ceramic ground) requirements. The shoes are also equipped with a composite toecap and have ESD anti-electrostatic properties to dissipate electrical charges in the range of 0.75 MΩ to 35 MΩ. The footwear is made in the S1 FO SR category, is CE certified and is designed for use in industries including electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical. Available in sizes 39 to 47.
    67,29€
    На заказ
    Sabre saw blades 228 x 19 x 0.9 mm, 14TPI, cpl. 2 pcs.
    03-57952
    Sabre saw blades 228 x 19 x 0.9 mm, 14 TPI, set of 2 pieces 57-952 by NEO TOOLS are two blades made of BIM, which have 14 TPI and dimensions 228 x 19 x 0.9 mm (tooth spacing 1.8 mm). They are designed for fast cuts in demanding materials: metal, open/closed pipes (10-175 mm diameter) and thick sheet metal (3-8 mm). The flexible design improves guidance control and durability when working with a wide variety of sections.
    9,70€
    На заказ
    Nut rivets M5, aluminium, 20 pcs
    01-43E135
    TOPEX aluminium nut rivets for screws. The set includes 20 pieces. Nut rivets allow to join metal pieces and later disassemble the joint. TOPEX brand is oriented towards DIY enthusiasts.
    3,20€
    На заказ
    Work boots S1 SR, ESD, composite toecap, size 42
    03-8217842
    NEO TOOLS' S1 SR, ESD, composite toecap, size 42, 82-178-42 work boots are made of rip-stop knitted upper and mesh knitted lining, and the HI-POLY foam insole used increases their comfort. The EVA and rubber sole meets FO (petrol and oil resistance) and SR (slip resistance on SLS solution-coated ceramic ground) requirements. The shoes are also equipped with a composite toecap and have ESD anti-electrostatic properties to dissipate electrical charges in the range of 0.75 MΩ to 35 MΩ. The footwear is made in the S1 FO SR category, is CE certified and is designed for use in industries including electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical. Available in sizes 39 to 47.
    67,29€
    На заказ
    S1 SR work boots, ESD, composite toecap, size 39
    03-8217839
    NEO TOOLS' S1 SR, ESD, composite toecap, size 39, 82-178-39 work boots are made with a rip-stop knitted upper and a knitted mesh lining, and the HI-POLY foam insole used increases their comfort. The EVA and rubber sole meets FO (petrol and oil resistance) and SR (slip resistance on SLS solution-coated ceramic ground) requirements. The shoes are also equipped with a composite toecap and have ESD anti-electrostatic properties to dissipate electrical charges in the range of 0.75 MΩ to 35 MΩ. The footwear is made in the S1 FO SR category, is CE certified and is designed for use in industries including electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical. Available in sizes 39 to 47.
    67,29€
    На заказ
    Cable pulling pilot 30m
    03-01566
    The 30m cable pulling pilot 01-566 by NEO TOOLS is a tool designed for pulling cables in electrical installations. With a length of 30m and a diameter of 4mm, the pilot is made of fibreglass, which enables efficient cable routing in installation ducts. The body is made of ABS plastic and features a carrying handle and a hand retractor for easy handling and storage. The cable attachment tip used allows the cable to be held firmly in place during pulling. The NEO TOOLS cable pulling pilot allows quick work, promoting time saving during installation tasks carried out by electricians.
    28,50€
    На заказ
    Screwdriver bit PH2 x 300 mm
    03-56578
    Screwdriver bit PH2 x 300 mm, 1/4" Hex 56-578 by NEO TOOLS is a PH2 type bit with a length of 300 mm. Mounted on a ¼" HEX thread. It features high resistance to deformation and is recommended for high frequency work. The component is made from S2 steel. The tip is recommended for POZDIRIV screws and will prove useful in every professional and DIY workshop.
    5,00€
    На заказ
    S1 SR work boots, ESD, composite toecap, size 44
    03-8217844
    NEO TOOLS' S1 SR, ESD, composite toecap, size 44, 82-178-44 work boots are made of rip-stop knitted upper and mesh knitted lining, and the HI-POLY foam insole used increases their comfort. The EVA and rubber sole meets FO (petrol and oil resistance) and SR (slip resistance on SLS solution-coated ceramic ground) requirements. The shoes are also equipped with a composite toecap and have ESD anti-electrostatic properties to dissipate electrical charges in the range of 0.75 MΩ to 35 MΩ. The footwear is made in the S1 FO SR category, is CE certified and is designed for use in industries including electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical. Available in sizes 39 to 47.
    67,29€
    На заказ
    Front riveting tool for aluminium rivets 2.4/3.2/4.0/4.8 mm
    01-43E780
    TOPEX long arm riveter for aluminium rivets. 2-jaw grip ensures stronger grip of the rivet and removal of broken joints. Elongated arms enable operation at lower applicable forces. Quick jaws replacement. TOPEX brand is oriented towards DIY enthusiasts.
    28,71€
    На заказ
    SDS Plus reinforced concrete drill bit 8 x 260 mm, quatro
    03-54106
    The SDS Plus 8 x 260 mm, quatro 54-106 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 8 mm and an overall length of 260 mm and a working length of 190 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.
    4,20€
    На заказ
    Nut rivets M3, aluminium, 20 pcs
    01-43E133
    TOPEX aluminium nut rivets for screws. The set includes 20 pieces. Nut rivets allow to join metal pieces and later disassemble the joint. TOPEX brand is oriented towards DIY enthusiasts.
    2,70€
    На заказ
    Nut rivets M6, aluminium, 20 pcs
    01-43E136
    TOPEX aluminium nut rivets for screws. The set includes 20 pieces. Nut rivets allow to join metal pieces and later disassemble the joint. TOPEX brand is oriented towards DIY enthusiasts.
    3,50€
    На заказ
    Riveting machine for M3, M4, M5, M6, M8 rivet nuts
    01-43E111
    TOPEX nut riveter for M3, M4, M5, M6, M8 nut rivets. Riveter can compress even nut rivets made of hard materials, such as steel and stainless steel, as well as aluminium nut rivets. It is equipped with 4 exchangeable heads. Nut rivets allow to join metal pieces and later disassemble the joint. TOPEX brand is oriented towards DIY enthusiasts.
    58,80€
    На заказ
    S1 SR work boots, ESD, composite toecap, size 40
    03-8217840
    NEO TOOLS' S1 SR, ESD, composite toecap, size 40, 82-178-40 work boots by NEO TOOLS are made with a rip-stop knitted upper and a knitted mesh lining, and the HI-POLY foam insole used increases their comfort. The EVA and rubber sole meets FO (petrol and oil resistance) and SR (slip resistance on SLS solution-coated ceramic ground) requirements. The shoes are also equipped with a composite toecap and have ESD anti-electrostatic properties to dissipate electrical charges in the range of 0.75 MΩ to 35 MΩ. The footwear is made in the S1 FO SR category, is CE certified and is designed for use in industries including electronics, computer, chemical, automotive, pharmaceutical, optical, food, aerospace and petrochemical. Available in sizes 39 to 47.
    67,29€
    На заказ
    Riveter for expansion pins for gypsum-cardboard panels
    01-43E790
    TOPEX riveter for expansion pins for cardboard gypsum panels, for pins with diameters 4 to 6 mm. Sturdy steel upper handle and riveter body. TOPEX brand is oriented towards DIY enthusiasts.
    17,20€
    На заказ
    Категория
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
        
    На складе
    Производители
    Бренд
    Сверлимый материал
    Комплект
    Цвет
    Класс качества
    Размер биты
    Drive
    Крепление инструмента
    Рекомендуемая сфера применения
    Diameter mm x length mm
    Поверхностное покрытие
    Форма головки
    Материал
    Цвет
    DIN
    Размер
    Пригодность для материала
    Тип сверла
    Тип пены
    Цвет лазерного луча
    Тип скобы / гвоздя
    Update cookies preferences