НОВЫЕ ПРОДУКТЫ

Especially for non-ferrous metals such as aluminum, copper, brass. Wax adheres to the tool. Ideal for working eg overhead use. Chlorine.
Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

• Diagonally toothed steel infeed roller for constant and even material infeed, resulting in chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) - ideal for economical planing of fine wood
• Spiral cutterhead with pulling cut, therefore low power requirement and very quiet
• Material feed with two speeds
• Particularly long planing tables enable easy and precise planing of the workpieces
• Grey cast iron work tables, post-annealed and stress-free, making them resistant and permanently flat
• Dressing tables open to the rear at the same time for short set-up times
• Planer thicknessing table adjustment via handwheel with numerical display for planing height
• Digital models with motorized thicknessing table adjustment
• High machine weight for maximum precision and smooth running
• Powerful industrial motor
• Robust steel/cast iron construction
• Equipped with fold-down planer shaft guard for user-friendly operation
• Quality - Made in Italy

Manufacturer
SCM Group S.p.A Div. MINIMAX
Via Casale 450, 47826 Villa Verucchio (RN), Italy
minimax@scmgroup.com

Sliding table saw for machining aluminum

• Solid worktable made of heavily ribbed gray cast iron - for maximum stability and durability
• Robust welded steel base frame - guarantees high torsional rigidity and vibration-free working
• Precise format sliding carriage made of anodized aluminium - guided smoothly by a high-quality ball contact system
• Carbide guideways - for lasting precision and minimal maintenance
• Pivoting cast iron saw unit with double segment guide - exact zero-point pivoting for maximum cutting accuracy
• Solid rip fence with round bar guide
• Equipped with movable eccentric clamping device
• Integrated angle-cutting device on the sliding table for precise mitre cuts
• Equipped with high-quality edging frame - with solid telescopic fence, integrated roller for easy loading and unloading, inclined scale for easy reading and practical eccentric clamp for secure hold
• Saw blade speed adjustable in two stages
• On/off switch integrated in the sliding carriage
• Suitable for cutting aluminum and plastic
• Micro-lubrication of the saw blade during processing
• Practical saw blade pendulum guard

Manufacturer
SCM Group S.p.A Div. MINIMAX
Via Casale 450, 47826 Villa Verucchio (RN), Italy
minimax@scmgroup.com

• Control unit with electronic display for programmed, motorised height adjustment and tilting of the sawing unit
• Cast iron saw unit warrantys torsional rigidity and vibration-free operation
• Sawing unit with permanently precise double swivel segment guide, 6 years Holzkraft warranty on wear of the swivel segments
• Large edging frame with roller facilitates panel feeding
• Telescopic ruler with two professional folding stops
• Smooth-running and precise sliding carriage made of anodized aluminium with proven and permanently smooth-running ball contact system on hardened steel guide tracks, 10-year warranty on wear of the guide tracks
• Scoring device equipped with its own drive and easily adjustable from the outside
• Two-position saw blade anti-sway device manually adjustable
• A 3 version with three-axis control additionally equipped with motorized rip fence with electronic positioning, position indication via encoder, adjustment via ball screw, infinitely variable adjustment via switch or automatic positioning and possibility of incremental adjustment
• UP version with swivelling control panel for maximum flexibility
• X-version with Compex mitre fence for fast and accurate execution of mitre cuts, automatic compensation of the fence position. (length compensation)
• Optionally available: two saw blade speeds, cross-cut fence with digital display
• Made in Italy

Manufacturer
SCM Group S.p.A Div. MINIMAX
Via Casale 450, 47826 Villa Verucchio (RN), Italy
minimax@scmgroup.com

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Patented anti-lift mechanism
• Guide surfaces hardened and ground
• Booster system, little effort, high pressure during clamping
• Wide clamping range by locking bolts with different hole distances
• Made of high quality stainless steel
• Spindle is protected against dirt and chips
• Parallelism: 0.01 / 100 mm. / Tolerance between bed and jaws: 0.02 / 100 mm
• Clamping pressure 60 Nm
• Clamping force 6,000 kg
• Weight 66 kg

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Lathe chuck body made of high quality cast iron
• All worktops induction hardened and ground
• Camlock direct mount DIN 55029
• High concentricity (more accurate than DIN 6386)
• Made in EU

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Cast lathe chuck
• Camlock direct mount DIN 55029

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Easy running
• Spindle with rolled trapezoidal thread
• Many mounting options on the drilling table due to slotted holes

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Cast lathe chuck
• Camlock direct mount DIN 55029

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Drill vices in industrial quality
• Replaceable prism jaws
• Long guides on moving jaw prevent tilting
• Many assembly options on drill table thanks to slots
• Precision ground prism jaws
• Premium grey cast
• Scraped guide surfaces

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Cast lathe chuck
• Camlock direct mount DIN 55029

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de