НОВЫЕ ПРОДУКТЫ

• requires article 3649080

The reinforced HL-combi-tooth with a slightly positive rake angle in combination with a group setting cuts solid material and profiles with particularly low vibration, increases the cutting performance and offers smooth surfaces with a convincing tool life.

The specialist for:

• small and medium-sized swing frame machines
• common steel grades up to approx. 1400 N/mm² tensile strength
• single and bundle cuts
• profiles and beams
• solid material

• Steel < 500 N
• Plastics GFK / CFK

• Steel < 750 Nm
• Copper, brass, nickel, tin

• Steel < 900 N
• Alu < 10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Plastics GFK / CFK

• Steel < 750 Nm
• Copper, brass, nickel, tin

• Steel < 900 N
• Alu < 10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• Specially adapted cutting geometries especially for the different diameters and cutting depths

The reinforced HL-combi-tooth with a slightly positive rake angle in combination with a group setting cuts solid material and profiles with particularly low vibration, increases the cutting performance and offers smooth surfaces with a convincing tool life.

The specialist for:

• small and medium-sized swing frame machines
• common steel grades up to approx. 1400 N/mm² tensile strength
• single and bundle cuts
• profiles and beams
• solid material

Specially developed tooth form for processing a particularly wide range of materials and universal use for solid material and profiles. Economical for reduced stock-keeping.

The specialist for:

• steel beams, profiles and tubes
• workpiece mix

The combined tooth with an extremely positive rake angle in combination with the group set will cut thin-walled sections with little vibration. Tooth tips made of HSS M 51 additionally improve the band service life, in particular for problematic materials.

The specialist for:

• Popular steel grades up to approx. 1 700 N/mm² tensile strength
• Corrosion and acid-resistant steels
• Nickel based alloys
• Titanium and special bronzes
• Solid material medium dimensions
• Thick-walled sections

The combination tooth with a positive rake angle in combination with the group set chips solid material and thick-walled profiles with particularly low vibration, increases the cutting performance and produces a smooth surface.

The specialist for:

• common steel grades up to approx. 1400 N/mm² tensile strength NF profiles
• single and bundle cuts workpieces of medium or large dimensions
• thick-walled profiles

• Steel < 500 N
• Plastics GFK / CFK

• Steel < 750 Nm
• Copper, brass, nickel, tin

• Steel < 900 N
• Alu < 10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• Specially adapted cutting geometries especially for the different diameters and cutting depths

The reinforced HL-combi-tooth with a slightly positive rake angle in combination with a group setting cuts solid material and profiles with particularly low vibration, increases the cutting performance and offers smooth surfaces with a convincing tool life.

The specialist for:

• small and medium-sized swing frame machines
• common steel grades up to approx. 1400 N/mm² tensile strength
• single and bundle cuts
• profiles and beams
• solid material

• 1m Anschlag mit digitaler Messanzeige für 290 mm Rollenbahnen

• Steel < 500 N
• Plastics GFK / CFK

• Steel < 750 Nm
• Copper, brass, nickel, tin

• Steel < 900 N
• Alu < 10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• Specially adapted cutting geometries especially for the different diameters and cutting depths

• Steel < 500 N
• Plastics GFK / CFK

• Steel < 750 Nm
• Copper, brass, nickel, tin

• Steel < 900 N
• Alu < 10% Si

• Made of high-alloy HSS-XE special steel
• Thus extreme hardness at the tooth tips (up to 68 HRC)
• Long service life

• Standard hardened HSS core drills in stages
• As a result extremely hard tooth tips (68 HRC) and still flexible core drill

• Specially adapted cutting geometries especially for the different diameters and cutting depths

Specially developed tooth form for processing a particularly wide range of materials and universal use for solid material and profiles. Economical for reduced stock-keeping.

The specialist for:

• steel beams, profiles and tubes
• workpiece mix