НОВЫЕ ПРОДУКТЫ

Submersible dirty water pump 900W, 16000 l/h

03-04746

Dirty water submersible pump 900 W, capacity 16 000 l/h 04-746 by NEO TOOLS is a practical device for pumping water out of buildings or basements, as well as for delivering water from intakes (e.g. wells) to destinations. It is characterised by 900 W power and a capacity of up to 16,000 l/h. The maximum immersion depth of the NEO TOOLS pump is 7 m and the maximum water rise is 9 m. The unit leaves 30mm of water after pumping and the largest possible diameter of dirt handled must not exceed 25mm. The NEO TOOLS submersible pump is made of aluminium (motor housing), as well as glass fibre reinforced nylon (for the main housing). The maximum supported water temperature is 35 degrees Celsius. The unit also features a ceramic spindle seal and a long 10-metre rubber power cable. It supports spigot diameters of ∅25, ∅32, 1", 1 ½". The dirty water submersible pump from NEO TOOLS is a useful solution for the work of a builder, plumber, farmer, as well as anyone who needs to pump out a large amount of water in a short time.

63,50€

На заказ

Cordless grass trimmer Energy+ 18V Li-Ion, cutting width 254 mm, without battery

02-58G030

Cordless grass trimmer Energy+ GRAPHITE 58G030 is designed for operation in garden for trimming lawn in hard to reach areas, such as corners, edges, or uneven ground, as well as along walls, near trees and under garden benches. Light weight, telescopic pipe adjustable to the user's height and cordless power supply of the grass trimmer make the tool handy at work. The product features ergonomic switch that allows for one handed operation. Adjustable tool head allows to pick the right setting for the lawn surface.

60,40€

На заказ

Jigsaw 650W, speed 0-3100 min-1, BMC

02-58G067

High end GRAPHITE electric jigsaw with 650 W power is designed for precise and quick cutting of wood and metal with maximum thickness 65 mm and 8 mm, respectively. Speed adjustment system allows to operate at speeds 0 to 3100 strokes per minute. The jigsaw has aluminium footplate with tilt angle adjustable within range 0° to 45° right or left, back side of the footplate also contains convenient clip for blades. With 3-step adjustment of pendulum action the tool allows to improve cutting speeds in specific materials. The jigsaw blade (18 mm stroke) is protected with transparent guard made of durable polycarbonate. The tool handle is covered with anti slip material for comfort and safety and equipped with comfortable switch with a lock. This convenient jigsaw with system for blow off and extraction system for chips and dust will prove excellent in a craft workshop and home garage as well. The jigsaw set includes: hexagonal key, blade - 2pcs, edge guide, carrying case. The tool is equipped with flexible and strong power cord in rubber coating, 3 m long, also designed for professional and industrial applications for use indoors and outdoors.

59,20€

На заказ

USB adapter - Energy+ LED torch, without battery

02-58G025

USB Power Adaptor - LED Flashlight Energy+, power 1W, Number of LEDs 1, operating temperature range 4 ° C ÷ 40 ° C, external USB 5V DC 1.5A outputs, weight 0.11kg, compatibility with Energy + batteries

14,20€

На заказ

Volframkarbiit kattega lõikeketas 76MM kipsplaat, PVC, fiiber, Sobib mudelile: DMC300

43-D-78374

6,71€ 8,61€

На заказ

nurklihvijate mitmikvõti

48-T2608000853

7,20€ 9,37€

На заказ

PIRN 12V; 14,4V (2tk.) ML120, ML140, BML145

43-GM00002281

6,55€ 8,39€

На заказ

Belt & Disc Sander 0.37 kW, 230 V

51-5903152

The HOLZSTAR BTS 151 V is a compact and versatile belt and disc sander, designed for precise sanding of wood and wood‑based materials. It is ideal for home workshops, training facilities and small professional workshops where flexibility and accuracy are required.

The machine features variable speed control, allowing optimal adjustment to different materials and applications. The belt sanding unit swivels from 0° to 90°, enabling vertical and horizontal operation. A height‑adjustable workpiece support (0°–45°) and a mitre fence guided in a T‑slot ensure accurate sanding of edges, mitres and flat surfaces.

A solid cast‑aluminium housing, tool‑free quick belt change system, and an integrated dust extraction port make this sander reliable and user‑friendly.

Key Features:

Combined belt and disc sander for precision sanding
Powerful 0.37 kW motor
Variable speed control
Belt unit swivels 0°–90°
Workpiece support adjustable from 0° to 45°
Mitre fence guided in T‑slot
Fast, tool‑free belt change
Integrated dust extraction connection

157,50€ 175,00€

В наличии 1

Tower Extension Lead 8-way, 2x USB A & 1x USB C 2m cable, two-pole switch

45-1153560010

Pistikute paigutus ja 45° nurga all seadmine võimaldavad kasutada kõiki pesaauke probleemideta, isegi suurte nurgapistikute puhul. 3 USB laadimispesa täiendavad pistikuriba ideaalselt. Lisaks avaldab pistikupesatorn muljet järgmiste omadustega:

Pistikupesatorn paindlikuks ja ruumisäästlikuks ruumilahenduseks
1x USB C laadimispesa (kuni 20W)
2x USB A laadimispesa (kuni 18W)
Atraktiivne ja stabiilne korpus
Kahepoolselt sisse-/väljalülitatav lüliti
Kaabli pikkus: 2m
Kaabli tähistus: H05VV-F 3G1.5mm²

47,48€ 54,58€

В наличии 4

Cordless chain saw Energy+ 18V Li-Ion, 10 "(250mm) bar, without battery

02-58G034

Cordless chainsaw (ref. 58G034) working with 18V Li-Ion GRAPHITE Energy+ batteries. Fitted with a 10" bar it is useful for a wide range of domestic and garden tasks. The saw has an integrated bar and chain lubrication system. It has a tool-less chain tensioning system and a safety brake to protect the user in the event of the chainsaw kicking back during cutting.

103,80€

На заказ

Work gloves with magnet, fingerless, size 10"

03-GD014

Fingerless Magnetic Work Gloves, Size 10" NEO (Ref. GD014) have a magnet on the back to keep screws, nuts and other small parts close at hand for the do-it-yourselfer while working. Three exposed fingertips allow for precise work. Fingertips and wrists are protected by a rubber coating which acts as a shock absorber and reduces abrasion. Velcro on the wrist allows to adjust the circumference. The gloves comply with the EN 388 standard. Available in size 10".

23,40€

На заказ

Garden hose 20 m, 1/2" ECONOMIC

01-15G800

ECONOMIC garden hose 20 m, 1/2" VERTO (ref. 15G800). Protection against the adverse effects of sunlight and an anti-algae system will allow efficient and trouble-free operation over a long period of time. The garden hose allows water to flow at pressures of up to 24 bar. The hose retains all its performance parameters in a temperature range from - 10 to + 60°C.

12,70€

На заказ

Large leaf rake, plastic

03-95041

Leaf rake large, plastic 95-041 by NEO TOOLS features a width of 480 mm and a length of 430 mm. The diameter of the handle mounting hole is 25 mm and the recommended diameter of the handle itself is 23 mm. They are made from 300k moplene. They have a light weight and are durable. Thanks to the easy exchange of the handle, they can share the handle with other tools for the garden and in agriculture.

5,00€

На заказ

Garden hose 3/4" x 30 m, 4-layers NEO ECONOMIC

03-15804

4 ply NEO garden hose made from flexible PVC and reinforced with polyester yarn. Perfect for maintenance work in small and large garden areas including cleaning outdoor furniture and tools. Resistant to algae build-up and UV rays, which extends its life.

35,40€

На заказ

Brass quick coupler with male thread 1"

03-15642

1" male thread brass quick connector NEO (ref. 12-642) is designed to connect taps with 1" diameter thread. It ensures tight and durable connections. It is suitable for use in agriculture, industry and garden. The connector has been made of brass which will enable it to work for many years.

6,30€

На заказ

USB type C cable, 2 m

03-GD040

USB type C cable, 2 m GD040 by NEO TOOLS is a cable for charging devices and synchronising data. It is characterised by a maximum charging current of 3.5 A and a length of 200 cm. It has a USB-A input and a USB-C type output. Thanks to the use of a nylon sheath, the NEO TOOLS cable does not get tangled and wears out much slower than competitor products. The USB Type C cable is CE certified.

6,30€

На заказ

Roller hose guide

01-15G851

The VERTO hose guide (ref. 15G851) is ideal for any garden. The guide has a metal pin, which is easy to drive into the ground. Just put the hose through and the rollers will rotate with the movement of the hose. This will prevent the hose from tangling and kinking as well as protect plants from damage.

5,60€

На заказ

3D laser, 16 lines, green, carrying case, target plate, magnetic holder, charger

03-75141

3D laser, 16 lines, green, case, target plate, magnetic holder, charger 75-141 by NEO TOOLS is a device with a green laser beam, offering a beam range of up to 25 metres and an accuracy of 1.5 mm/5 metres. It features a light wavelength of 515+/-10 nm and a self-levelling range of 3 degrees. Operating time on a 3.7V 4000 mAh Li-Ion battery is approximately 4 hours. The NEO TOOLS 3D laser has been manufactured to Class II and protection class IP43. The laser power is < 1 mW. The laser is displayed in three planes, including one duplicated horizontally. Offered in a set with a vertical tripod head, swivel head, head with reducer, mounting plate, two rechargeable batteries, remote control, jack, target plate, magnetic holder, charger, USB charging cable and a practical carrying case. The 3D laser from NEO TOOLS has a laser lock function, allowing straight lines to be drawn at any angle and an indication of unleveling by flashing the laser. The product also features CE certification for compliance with EN60825-1:2014, ensuring safe working conditions. Its dimensions are 130 x 90 x 153 mm and weight (without battery) 710 g. It is a lightweight, multi-purpose device for marking precise lines. Essential for the construction industry.

259,90€

На заказ

Searchlight lamp 1000lm

03-99114

The 1000 lm searchlight 99-114 by NEO TOOLS is a lamp characterised by 1000 lm illumination, 5 W power and a range of 350 metres. It has a built-in SST40 LED. Its body is made of a durable combination of ABS and TPR. With an IP44 water and dustproof rating, it is resistant to various weather conditions. The built-in 18650 Lithium 3.7 V battery with a capacity of 4400 mAH provides 4 to 8 hours of operation, with a charging time of 6-7 hours. The NEO TOOLS searchlight has a POWER BANK function, 100%-50% functions, a long SOS button and a battery charge indicator. It is offered with a USB C cable, a practical wrist cord and an additional carrying handle. The ON/OFF safety button adds to the comfort of using this device. The NEO TOOLS lamp is distinguished by its small size (154 x 173 mm) and low weight of 490 g. It will prove itself in many circumstances - during everyday use as well as in extreme situations.

42,71€

На заказ

Two-port car charger

03-GD036

The GD036 dual-port car charger by NEO TOOLS is a device made from a combination of ABS and metal, equipped with safety features for the user and the devices being charged. It has two outputs: USB A and USB C. It is characterised by charging parameters USB1: PD 5V-3A, 9V-2.5A, 12V-2.22A and USB2: QC3.0 5V-4.5A, 9V-2.25A, 12V-1.8A and an input voltage of 12-24V. Adapted to the Car Lighter plug (cigarette lighter socket), it allows charging of two devices simultaneously. The built-in LED light makes it convenient to use, and its light weight and compact size means you can always have it at hand. This dual-port car charger from the NEO TOOLS brand is made of high-quality materials and is CE-certified.

8,20€

На заказ