Недавно просмотренные товары
52-2053534
- Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
- To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line
- Your advantages through better quality compressed air:
- Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
- Better working and production conditions
- Optimum protection of connected tools and machines
- Improved product quality through reduction of rejects
- Protection of the compressed air system against contamination
- Increase of productivity by reduction of instant maintenance
- for the separation of oil vapors, odors and flavorings via adsorption and in the second stage of solid particles
- Residual content of oil vapor up to 0.005 mg / m³ at 20 ° C and 1 bar
- Operating temperature 1.5 to 45 ° C
- Compressed air quality according to ISO 8573-1
- For compressed air of the highest quality, eg, for breathing air, in analytical technology or semi-luxury bottling
- Pure compressed air in connection with upstream ultrafine filter
- with filter element and manual drain
ManufacturerAircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at
52-2053070
- For mounting in the filter housing
ManufacturerAircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at
52-2066421.2
- For continuous air demand and discontinuation operation
- Electronic control for reliability and efficiency
- Increased flexibility thanks to two compressed air tanks
- High-quality and expandable equipment
- Smooth and quiet
- Just as mobile and compact as piston compressors, but with the great advantage of being able to generate compressed air continuously without any cooling pauses
- Can also be used in intermittent operation due to oil temperature control
Electronic temperature control for optimum oil temperature
- Optimum oil viscosity due to constant temperature, therefore also suitable for intermittent operation with frequent load changes
- Temperature control of the oil prevents condensation and minimizes wear
- Better energy efficiency compared to a piston compressor with the same delivery capacity
- Additional oil heat exchanger for cooling
K-Tronic electronic control system for reliability and efficiency
- Adjustment of the cut-in and cut-out pressure
- Direction of rotation control
- Monitoring and control of the oil temperature
- Maintenance interval display
Optimized oil separation system
- Effective oil pre-separation by gravity, as the oil sump is located at the lowest point
- Oil separator cartridge and oil filter cartridge easily accessible for maintenance
Integrated design of the compressor unit
- Convenience and high operational reliability thanks to integration and short connections of all key components on the compressor unit
- Maintenance-free direct drive
- Freewheel valve for load-free operation after reaching the set pressure
Lightweight, compact and quiet
- Can be used in mobile applications or where space is limited
- Highly efficient and low-noise fan
- Smooth-running compressor with low noise level
Increased flexibility thanks to two compressed air tanks
- Two 100 liter compressed air tanks ready mounted on a safety pallet
- Doubling of the air supply by switching on the second compressed air tank - an increased air requirement is covered at short notice
- Halving the tank volume by disconnecting the second compressed air tank - allows pressure to be built up quickly, e.g. for chiseling or sandblasting work
High-quality equipment
- Hot-dip galvanized compressed air tanks inside and out with a 15-year guarantee against rusting through
- Splash water protection in accordance with IP 54
- Flexible armored hose lines with heat protection prevent vibration fractures
- With phase inverter on the plug as standard
- Ready for connection with all fittings
- Additional equipment for compressed air preparation and discharge available
ManufacturerAircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at
52-2058220
- Thanks to patented technology, regular service is possible in only 30 seconds and without expensive cleaning
- Wall and floor mounting possible
- Works reliably with any steam trap
- Suitable for all common compressor oils
- Operating media: condensate (air, water, oil), non-aggressive, not suitable for emulsion
- Quick and clean change of the filter cartridge
- No settling tank necessary (no bacteria formation)
- Easy installation due to compact design and small dimensions
- Connection via quick couplings
Function Description:
- Multi-stage oil-water separation via an oil-attracting filter and activated carbon
- After the end of the service life of the filter element this is unscrewed and disposed of completely
- Filter element is tightly closed with plastic cover, so that residual condensate can remain in it
- Locked filter element can be disposed of according to current regulations
service interval
- after occurrence of one of the following three cases:
- 4,000 operating hours of the compressor at compressor oil transfer of 2.5 mg / m3
- Discoloration of the polypropylene medium - analysis by simple visual inspection
- At the latest after 12 months (regardless of the operating hours of the compressor)
ManufacturerAircraft Kompressorenbau und Maschinenhandel GmbH
Gewerbestraße Ost 6, 4921 Hohenzell, Austria
info@aircraft.at
52-2044100
- Flow-optimized air supply for up to 75% less resistance
- Assembly of the filter elements without cross-sectional narrowing and disturbing tie rods, thus reduced flow resistance and easy element change even in confined spaces
- Cavity volume of the borosilicate filter material of 96% ensures the lowest pressure loss
- CLEARPOINT® filter housing made of water-resistant aluminum and additionally anodised on the inside, therefore increased operational safety and reduced flow resistance due to permanently smooth inner surfaces
- 100% control when opening the filter housing by a secure locking mechanism, when opened under pressure a warning signal sounds
- With thermally highly resistant (up to 120 ° C), mechanically highly resistant, chemically resistant and silicone-free needle felt drainage layer (in contrast to foam material of other filter makes)
- Stable construction of the filter element - it is not possible to inflate or rupture the drainage layer, thereby ensuring the constant use of the entire filter surface
- for the separation of oil vapors, odors and flavorings via adsorption and in the second stage of solid particles
- Residual content of oil vapor up to 0.003 mg / m³ at 20 ° C and 1 bar
- absolute compressed air quality according to ISO 8573-1
- For compressed air of the highest quality, eg, for breathing air, in analytical technology or semi-luxury bottling
- Pure compressed air in connection with upstream ultrafine filter
- With filter element and manual drain
ManufacturerBEKO Technologies GmbH
Im Taubental 7, 41468 Neuss, Germany
www.beko.de
