The 80 mm wire wheel brush, crimped wire, brassed with 6 mm shank 57T405 by GRAPHITE is made of crimped brassed wire. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.
The 115 mm wire wheel brush, twisted steel wire, M14, 57T432 by GRAPHITE with a diameter of 115 mm is made of twisted steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product meets the requirements of EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.
Cleaning brushes for drill, 4 pieces 57T437 by GRAPHITE are four brushes with diameters of 50 mm, 90 mm, 100 mm and 130 mm. Their attachment is by means of a universal 1/4" HEX chuck. The brushes are designed for use with any drill or screwdriver. The different head shapes allow them to work on different surfaces and reach hard-to-reach areas. They are suitable for wet or dry cleaning. The medium-hard bristles effectively remove dirt without damaging the surface. GRAPHITE brand brushes are used in the home, workshop, garage and car
GRAPHITE's 125 mm diameter wire wheel brush, twisted steel wire, M14, 57T411 by GRAPHITE is made from twisted steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product meets the requirements of EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.
GRAPHITE's 75mm diameter, crimped steel wire butt brush, M14, 57T428 is made from crimped steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product complies with EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.
The 50 mm nylon butt brush with 6 mm shank 57T418 by GRAPHITE is made of nylon. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE nylon brush is a versatile product for many woodworking tasks.
The circular wire brush 125 x 20 mm, crimped wire, brassed 57T407 by GRAPHITE is made of crimped brassed wire. It has a maximum rotational speed of 6,000 rpm. The product complies with EN 1083-2 and includes reductions: 2 x 12.3 mm (1/2"), 2 x 16 mm (5/8"). The mount is suitable for use with angle grinders. The GRAPHITE wire brush is a versatile product for many tasks, including aggressive cleaning and roughing pre-machining.
GRAPHITE's 115 mm diameter wire wheel brush, crimped steel wire, M14, 57T436 is made from crimped steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product complies with the EN 1083-2 standard and is well suited for working on metal surfaces, cleaning, removing rust, paint or dirt.
The 25mm nylon butt brush with 6mm shank 57T426 by GRAPHITE is made of nylon. It has a maximum speed of 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE nylon brush is a versatile product for many woodworking tasks.
The 100 mm nylon wheel brush with 6 mm shank 57T423 by GRAPHITE is made of nylon. It has a maximum speed of 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE nylon brush is a versatile product for many tasks.
The 150 x 32 mm, crimped wire wheel brush 57T435 by GRAPHITE is made of crimped steel wire. Its maximum speed is 6000 rpm. The product meets the requirements of EN 1083-2 and the set includes reductions: 2 x 12.2 mm (1/2"), 2 x 15.7 mm (5/8"), 2 x 19 mm (3/4"), 2 x 22.2 mm (7/8") and 2 x 25.3 mm (1"). The mount is suitable for use with bench grinders. The GRAPHITE wire brush is a versatile product for many tasks.
GRAPHITE's 100 mm diameter wire butt brush, twisted steel wire, M14, 57T412 is made from twisted steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 8500 rpm. The product meets the requirements of EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.
The 75 mm, twisted wire, steel butt brush with 6 mm shank 57T414 by GRAPHITE is made of twisted steel wire. Its maximum speed is 4500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.
GRAPHITE's 24mm, crimped wire brush with 6mm shank 57T431 is made from crimped steel wire. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.
The 50 mm, crimped wire, steel butt brush with 6 mm shank 57T417 by GRAPHITE is made of crimped steel wire. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.
The 100 x 20 mm wire wheel brush, crimped wire, brassed 57T408 by GRAPHITE is made of crimped brassed wire. It has a maximum rotational speed of 6,000 rpm. The product complies with EN 1083-2 and includes reductions: 2 x 12.3 mm (1/2"), 2 x 16 mm (5/8"). The mount is suitable for use with bench grinders. The GRAPHITE wire brush is a versatile product for many tasks, including aggressive cleaning and roughing pre-machining.
The 70 mm diameter, twisted steel wire, M14, 57T413 wire butt brush by GRAPHITE is made of twisted steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product meets the requirements of EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.
Wire brushes crimped wire, brass-plated, brush 25 mm, disc 50 mm, butt 75 mm, 3 pcs, shank 6 mm 57T402 by GRAPHITE are made of crimped brass-plated steel wire. The set includes three brushes: a 25mm brush, a 50mm disc and a 75mm butt brush. All have a 6 mm diameter shank. The maximum speed for them is 4,500 rpm. The GRAPHITE brand set is designed for use with drills and drill drivers. The brushes are suitable for removing rust, paint, material burrs and for smoothing surfaces and edges. They comply with standard EN 1083-2.
The 60 mm diameter nylon butt brush, M14, 57T424 by GRAPHITE is made of nylon. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product complies with EN 1083-2 and is well suited for roughing surfaces, cleaning, removing paint or dirt.
The 75 mm, crimped wire, brassed wire butt brush with 6 mm shank 57T430 by GRAPHITE is made of crimped brassed wire. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6mm shank to allow operation with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.
