GRAPHITE's 12mm 56T729 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
GRAPHITE's 30mm bi-metal hole saw 56T706 is 51mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 285 rpm, Inox steel - 145 rpm, aluminium - 425 rpm, wood - 410 rpm, cast iron - 190 rpm, brass - 380 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
The 56T744 tungsten hole saw disc by GRAPHITE is designed for the 56T738-56T742 models with a diameter range from 33 to 73 mm. The material of its manufacture is aluminium. The disc also fits pilot drill 56T745 for tungsten holesaws. Thanks to the matching notches, it enables efficient mounting and easy replacement of the holesaws.
Wood hole saws with adapter 51 - 102 mm, set of 8 pcs. 56T747 by GRAPHTE is a set of wood hole saws with adapter, which includes five hole saws with diameters from 51 to 102 mm, allowing holes up to 25 mm deep. The set also includes an Allen spanner, an adapter with a 9.5 mm shank and a 6 mm diameter centre drill bit. The GRAPHITE holesaws are suitable for working in wood, plasterboard and plastic, with a maximum speed of 2,000 rpm.
GRAPHITE's 8mm 56T727 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
Wood hole saws 26 - 63 mm, h 50 mm, hardened teeth, set of 7 pieces 56T752 by GRAPHITE is a set containing 7 pieces with diameters: 26, 32, 38, 45, 50, 56 and 63 mm. The height of each hole saw is 50 mm and the maximum drilling depth is 42 mm. The maximum speed is 1500 rpm. The product is fitted with hardened teeth and is designed for drilling in wood, plasterboard and plastic.
GRAPHITE's 67mm 56T741 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.
Hole saws with adapter, 19-76 mm, set of 15 pieces 56T724 by GRAPHITE contains fifteen pieces. The set includes holesaws with diameters: 19 mm, 22 mm, 25 mm, 29 mm, 32 mm, 35 mm, 38 mm, 44 mm, 51 mm, 57 mm, 64 mm, 76 mm. Included - 2 adapters with a 6 mm pilot drill bit and an allen key for wider use. The height of each hole saw is 28 mm and the drilling depth is 25 mm. Maximum speed during operation is 1100 rpm. The GRAPHITE branded set is designed for drilling holes in wood, plastic and plasterboard using a drill or drill/driver.
The 6mm 56T726 diamond hole saw by GRAPHITE has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
GRAPHITE's 35mm 56T735 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
GRAPHITE's 25mm diamond hole saw 56T733 has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
NEO TOOLS' 32 mm diameter bi-metal hole saw 57-912 allows precise drilling of holes with a maximum depth of up to 38 mm. Equipped with teeth with a 6/4 TPI pitch, it is suitable for working with a variety of materials. Maximum speeds are: steel - 275 rpm, copper - 380 rpm, aluminium - 410 rpm, stainless steel - 140 rpm, plastic - 1800 rpm, wood - 2400 rpm. This is a versatile tool for professional and amateur use.
The 65 mm forked hole saw with HEX adapter and pilot drill 55-324 by NEO TOOLS is a set of forked hole saw offered with HEX adapter and pilot drill, recommended for impact and concrete tasks. The hole saw features a diameter of 65mm, a height of 72mm and a drilling depth of 50mm. It has an M22 thread and has been fitted with TCT blades. The drill bit, on the other hand, has a length of 110 mm and a diameter of 8 mm. The adapter has a total length of 110 mm. This is an indispensable set of forked hole saw, with HEX adapter and NEO TOOLS pilot drill bit for professionals and DIY enthusiasts.
Bosch PRO Multi Material PC Plus on professionaalne 14‑osaline augusaekomplekt, mis on mõeldud pika tööeaga ja täpsete avade lõikamiseks erinevates materjalides. Komplekt sobib eriti hästi elektrikutele, torulukkseppadele ja siseviimistlustöödeks, kus tuleb töödelda mitut materjali ühe ja sama tööriistakomplektiga.
Augusaed on valmistatud kiirterasest (HSS) 8% koobaltisisaldusega, mis tagab kõrge kulumiskindluse ja kuni 2× pikema kasutusea võrreldes standardsete HSS‑M3 augusaagidega. Täiustatud hambageomeetria võimaldab kiiret ja sujuvat lõikamist nii metallis kui ka mittemetallilistes materjalides.
Peamised eelised:
Sobib mitme materjali töötlemiseks (nt metall, kipsplaat, plast, puit)
HSS‑hambad 8% koobaltiga – väga pikk tööiga
Kiire ja puhas lõiketulemus tänu optimeeritud hambaprofiilile
Bosch Power Change Plus süsteem augusae ja tsentreerpuuri kiireks vahetamiseks
Professionaalseks kasutamiseks töömaal ja paigaldustöödel
