The combination tooth with a 0° rake angle in combination with the group set sawing also saws thin-walled profiles with particularly low vibration. Short chipping material is machined without any problems. The M42-SPRINT bi-metal saw blade increases the tool life and creates a good cutting quality.
The specialist for:
Common steel grades up to approx. 1400 N/mm² tensile strength
Specially developed tooth form for processing a particularly wide range of materials and universal use for solid material and profiles. Economical for reduced stock-keeping.
The combination tooth with a positive rake angle in combination with the group set chips solid material and thick-walled profiles with particularly low vibration, increases the cutting performance and produces a smooth surface.
The specialist for:
common steel grades up to approx. 1400 N/mm² tensile strength NF profiles
single and bundle cuts workpieces of medium or large dimensions
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
The combination tooth with a positive rake angle in combination with the group set chips solid material and thick-walled profiles with particularly low vibration, increases the cutting performance and produces a smooth surface.
The specialist for:
common steel grades up to approx. 1400 N/mm² tensile strength NF profiles
single and bundle cuts workpieces of medium or large dimensions
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
The combination tooth with a 0° rake angle in combination with the group set sawing also saws thin-walled profiles with particularly low vibration. Short chipping material is machined without any problems. The M42-SPRINT bi-metal saw blade increases the tool life and creates a good cutting quality.
The specialist for:
Common steel grades up to approx. 1400 N/mm² tensile strength
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
The combination tooth with a positive rake angle in combination with the group set chips solid material and thick-walled profiles with particularly low vibration, increases the cutting performance and produces a smooth surface.
The specialist for:
common steel grades up to approx. 1400 N/mm² tensile strength NF profiles
single and bundle cuts workpieces of medium or large dimensions
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
The reinforced HL-combi-tooth with a slightly positive rake angle in combination with a group setting cuts solid material and profiles with particularly low vibration, increases the cutting performance and offers smooth surfaces with a convincing tool life.
The specialist for:
small and medium-sized swing frame machines
common steel grades up to approx. 1400 N/mm² tensile strength
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
General information about bi-metal saw bands: The starting material of these bi-metal saw bands is a two-component material (bi-metal) obtained by electron welding. The band made of this material has a high-hardening, wear-resistant high-performance high-speed steel in the teeth, while the band body made of alloyed tempered steel is spring-hard and fatigue-proof. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
