SDS Plus masonry drill, 6 x 160 mm, S4, quatro, 10 pcs

Sabre saw blades, HCS, set of 3 58-047 by NEO TOOLS for sabre saws is a set including three lengths and serrations, selected for the most common wood and panel work. TPI 6, 152 x 19 x 1.3 mm (4 mm pitch) - for construction timber, plywood, 6-100 mm plastics, <75 mm panels, 6-60 mm chipboard and MDF; allows clean cutting as well as curved and plunge cuts. TPI 6-10, 203 x 19 x 1.3 mm (2.5-4 mm pitch) - for construction wood, plywood, plastics 6-150 mm, panels <175 mm, particle board and MDF 6-60 mm; provides clean cutting over a wider range of thicknesses. TPI 5, 240 x 19 x 1.5 mm (5 mm pitch) - for nailless wood 15-190 mm, fresh wood diameter <190 mm and firewood with diameters of 15-190 mm; works well for straight, fast and coarse cuts. Thanks to its diverse parameters, the NEO TOOLS set covers the typical needs for assembly and garden tasks.

Leather warm lined boots is the product from safety footwear category S3 SRC in accordance with EN ISO 20345. NEO boots are designed to protect feet from injuries. They are equipped with steel toes designed to provide protection against 200 J impacts and pressure of 15 kN, anti skid sole resistant to abrasion with shock absorbing system, resistant to oils, petrol and other organic solvents, resistant to skidding on ceramic floors covered with solution of sodium dodecylsulfate (SLS) and steel floors covered with glycerol. Footwear features integrated antipuncture insert, which protects against punctures from below, and antistatic insert. Resistance to water improves comfort of work in hard conditions, and warm lining with fake fur allows for use in low temperatures. The product has been evaluated for compliance and conforms to requirements of the European Union standards. NEO brand meets expectations of professionals.

The NEO TOOLS half boots S1 FO, steel toecap, size 42, 82-162-42 by NEO TOOLS are footwear made in the protective category S1 FO, characterised by a toecap providing protection against impacts with an energy equal to 200J, resistance to oils, petrol and other organic solvents. NEO TOOLS work boots have a robust steel toecap, a flyknit knitted upper and a knitted "mesh" lining. The shoes are also equipped with a PU/PU sole and an EVA foam insole. The metal toecap protects the foot from injury. The upper of the NEO TOOLS flyknit type work boots is woven from a single thread, which contributes to the lightweight construction and very good fit of the footwear to the foot. The product is CE certified in accordance with the EN ISO 20345 standard.

Velcro sanding discs 150 mm, P60, 5 pcs, with 8 holes 55-946 by NEO TOOLS with a diameter of 150 mm and gradation P60. The pack contains five discs. The accessories have 8 practical holes with a diameter of 10 mm, with a diameter between the centres of the holes of 65 mm. Velcro discs from NEO TOOLS are made of type E paper. They are characterised by a half-open grain and grain made of electro-corundum. They will be suitable both for professional use and during DIY tasks, in metal, plastic and wood.

PREMIUM NEO work overalls made of 100% cotton are comfortable trousers with braces, with yoke dedicated to all professional and household works. They are made of ripstop fabric which blocks further tearing of the garment when it is mechanically damaged. To accommodate various tools, the dungarees are equipped with multifunctional pockets. The knees are padded and reinforced with Cordura, making it easy to do any job without hindering movement. Adjustable elastic waistband makes it easy to fit the overall. CE certified in accordance with EN ISO 13688:2013 available in sizes XS-XXXL.