Velcro sanding discs 150 mm, P180, 5 pieces, with 8 holes 58T281 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 150 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Sanding discs, perforated, Velcro with holes 225 mm, P100, 5 pieces 58T273 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
Sanding discs, perforated, Velcro with holes 225 mm, P60, 5 pieces 58T271 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
Sanding sponge 70 x 25 x 100 mm, P60, 58T160 by GRAPHITE is a sponge designed for hand sanding and finishing. Used for smoothing putty, drywall, plaster, paint, plastics, wood, metal and varnish coatings. The abrasive grain made of electro-corundum is located on four sides of the sponge. The soft structure allows it to conform to the shape of the surface to be sanded, and for hard-to-reach areas, the sponge can be easily cut into smaller pieces. Thanks to its thickness and flexibility, the GRAPHITE sanding sponge distributes the pressure of the hand evenly, avoiding localised depressions and scratches.
Sanding canvas in roll 2.5 m x 115 mm, P180, 58T445 by GRAPHITE is an accessory for sanding metal, wood, plastic and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.
Velcro sanding discs 125 mm, P100, 5 pieces, without holes 58T183 by GRAPHITE are discs without holes for metal, wood and plastic. Gradation P100 - medium - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing made of type C paper is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro attachment allows for quick replacement of GRAPHITE discs and comfortable working.
Sanding canvas in roll 2.5 m x 115 mm, P100, 58T443 by GRAPHITE is an accessory for sanding metal, wood, plastics and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.
Velcro sanding papers, iron 102 x 152 mm, P240, 5 pieces, with 11 holes 58T308 by GRAPHITE is a set of 5 pieces of Velcro sanding papers, 102 x 152 mm. They are characterised by a cut-out in the shape of a so-called iron - with the possibility of detaching one of the pieces and fitting it to a sander with a delta foot. The accessories have a paper backing and an electro-corundum coating. They are designed for machine use. With 11 holes on the surface, they allow them to be used on sanders equipped with a dust extraction system. The Velcro attachment allows for quick and easy changing of the GRAPHITE sanding sheets. They are suitable for use on wood, metal, plastic, glass and plasterboard.
Sanding grid 115 x 280 mm, P150 58T155 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It features a double-sided grit and black silicon carbide grain. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to the double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.
Sanding sponge 70 x 25 x 100 mm, P80, 58T161 by GRAPHITE is a sponge designed for hand sanding and finishing. Used for smoothing putty, drywall, plaster, paint, plastics, wood, metal and varnish coatings. The abrasive grain made of electro-corundum is located on four sides of the sponge. The soft structure allows it to conform to the shape of the surface to be sanded, and for hard-to-reach areas, the sponge can be easily cut into smaller pieces. Thanks to its thickness and flexibility, the GRAPHITE sanding sponge distributes the pressure of the hand evenly, avoiding localised depressions and scratches.
Water sandpaper 230 x 280 mm, P120, 58T213 by GRAPHITE is a water-based hand sanding paper. It has a full grain of electro-corundum, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Sanding papers 93 x 230 mm, P40, 5 pieces, without holes 58T255 by GRAPHITE are P40-graded papers suitable for sanding metal, wood and plastic. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures adequate performance. GRAPHITE sanding papers are offered in a practical set of 5.
Velcro sanding discs 125 mm, P40, 5 pieces, without holes 58T180 by GRAPHITE are discs without holes for metal, wood and plastic. Gradation P40 - the sharpest - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.
Yellow sanding paper in roll 2.5 m x 115 mm, P100, 58T423 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both manual and machine sanding - including with orbital sanders and gypsum sanding trowels.
Velcro sanding papers 93 x 185 mm, P40, 5 pieces, with 8 holes 58T240 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain is 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
Water sandpaper 230 x 280 mm, P2200, 58T230 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Sanding sponge 70 x 25 x 100 mm, P180, 58T165 by GRAPHITE is a sponge designed for hand sanding and finishing. Used for smoothing putty, drywall, plaster, paint, plastics, wood, metal and varnish coatings. The abrasive grain made of electro-corundum is located on four sides of the sponge. The soft structure allows it to conform to the shape of the surface to be sanded, and for hard-to-reach areas, the sponge can be easily cut into smaller pieces. Thanks to its thickness and flexibility, the GRAPHITE sanding sponge distributes the pressure of the hand evenly, avoiding localised depressions and scratches.
Sanding grid white 115 x 280 mm, P120 58T143 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It is characterised by a double-sided grit and a white grain of fine electro-corundum. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to its double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.
Velcro sanding discs 125 mm, P120, 5 pieces, with 8 holes 58T292 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Water sandpaper 230 x 280 mm, P400, 58T221 by GRAPHITE is a water-based hand sanding paper. It has a full grain of electro-corundum, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
