Sanding sponge 70 x 25 x 100 mm, P120, 58T163 by GRAPHITE is a sponge designed for hand sanding and finishing. Used for smoothing putty, drywall, plaster, paint, plastics, wood, metal and varnish coatings. The abrasive grain made of electro-corundum is located on four sides of the sponge. The soft structure allows it to conform to the shape of the surface to be sanded, and for hard-to-reach areas, the sponge can be easily cut into smaller pieces. Thanks to its thickness and flexibility, the GRAPHITE sanding sponge distributes the pressure of the hand evenly, avoiding localised depressions and scratches.
Velcro sanding papers 93 x 185 mm, P60, 5 pieces, with 8 holes 58T241 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain provides 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
Yellow sanding paper in roll 2.5 m x 115 mm, P220, 58T427 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both manual and machine sanding - including with orbital sanders and gypsum sanding trowels.
Water sandpaper 230 x 280 mm, P800, 58T224 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Velcro-backed sanding discs 125 mm, P220, 5 pieces, unperforated 58T187 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P220 - very fine - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro attachment allows for quick changing of GRAPHITE discs and comfortable working.
Velcro sanding discs 125 mm, P36, 5 pieces, with 8 holes 58T287 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Sanding paper yellow 230 x 280 mm, P80, 58T202 by GRAPHITE is a product designed for sanding surfaces such as wood and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open-cut coating, in which the surface is covered with 100% electro-corundum abrasive grain, GRAPHITE paper offers greater resistance to sanding dust clogging. It can be used for both hand and machine sanding - including with orbital sanders and plaster sanding trowels.
Sanding grid white 115 x 280 mm, P150 58T144 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It is characterised by its double-sided grit and white grain of fine electro-corundum. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to its double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.
Sanding paper yellow in roll 2,5 m x 115 mm, P80, 58T422 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both manual and machine sanding - including with orbital sanders and gypsum sanding trowels.
Sanding papers 93 x 230 mm, P80, 5 pieces, unperforated 58T257 by GRAPHITE are P80 grade papers suitable for sanding metal, wood and plastics. A type C paper base, designed for machine sanding, was used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures good performance. GRAPHITE sanding papers are offered in a practical set of 5.
Velcro sanding papers 93 x 185 mm, P150, 5 pieces, with 8 holes 58T245 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain provides 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
Iron sanding papers, Velcro 98 x 140 mm, P60, 5 pieces, with 5 holes 58T316 by GRAPHITE are papers available in a set of 5 pieces with 5 holes, designed for metal, wood and plastic. The sheets use a type C paper base, suitable for machine sanding. They have a semi-open mesh with 100% abrasive grain (electrocorundum) on the surface, ensuring efficient working and reducing clogging. The Velcro attachment allows easy and quick attachment to the tool.
Sanding paper yellow 230 x 280 mm, P40, 58T200 by GRAPHITE is a product designed for sanding surfaces such as wood and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open-cut coating, in which the surface is covered with 100% electro-corundum abrasive grain, GRAPHITE paper offers greater resistance to sanding dust clogging. It can be used for both hand and machine sanding - including with orbital sanders and plaster sanding trowels.
Velcro sanding papers 93 x 185 mm, P80, 5 pieces, with 8 holes 58T242 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain provides 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
Velcro sanding discs 125 mm, P40, 5 pieces, with 8 holes 58T288 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Sanding papers 93 x 230 mm, P240, 5 pieces, unperforated 58T263 by GRAPHITE are P240 grade papers suitable for sanding metal, wood and plastics. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures good performance. GRAPHITE sanding papers are offered in a practical set of 5.
Velcro sanding papers 93 x 185 mm, P120, 5 pieces, with 8 holes 58T244 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain provides 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.
Iron sanding papers, Velcro 98 x 140 mm, P220, 5 pieces, with 5 holes 58T322 by GRAPHITE are papers available in a set of 5 pieces with 5 holes, designed for metal, wood and plastic. The sheets use a type C paper base, suitable for machine sanding. They have a semi-open mesh with 100% abrasive grain (electrocorundum) on the surface, ensuring efficient working and reducing clogging. The Velcro attachment allows easy and quick attachment to the tool.
Sanding canvas in roll 2.5 m x 115 mm, P60, 58T441 by GRAPHITE is an accessory for sanding metal, wood, plastic and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.
Sanding cloth 230 x 280 mm, P220, 58T350 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for final smoothing of coatings.
