LOCTITE 55 on mõeldud metalltorustike ja -liitmike kinnitamiseks ja tihendamiseks. Toode ei vaja tahkumisaega ja tagab kohese täisrõhku taluva tihenduse.
PENOSIL All Weather Sealant 919 on silikoonivaba koheselt veekindel kautšukipõhine hermeetik, mida saab kasutada kiireteks fassaadi ja katuse remonditöödeks isegi vihma ajal. Nakkub hästi enamiku tavaliste katusekattematerjalidega, saab kanda ka niisketele, kergelt õlistele ja bituumenpindadele.
Omadused:
Suurepärane nakkuvus paljudele pindadele: tellis, betoon, puit, metall, klaas, plastid.
Ei sobi kasutamiseks polüetüleeni (PE), polüpropüleeni (PP) ega PTFE (Teflon®) pindadel.
Ei soovitata loodusliku kivi (nt marmor, graniit) tihendamiseks.
Võib muutuda kollakaks, kui on pikalt vee all – see ei mõjuta toimivust.
Kasutusvaldkonnad:
Katuse- ja fassaaditööd
Klaasimistööd
Paisumis- ja ühendusvuukide tihendamine
Pakend: 300 ml plastpadrun
Kitsendused:
Ei nakku polüetüleeni (PE), polüpropüleeni (PP) ega PTFE (Teflon®).
Ärge kasutage temperatuuril alla -5 °C.
Ei ole soovitatav kasutada loodusliku kivi, nt marmori ja graniidi, tihendamiseks.
Kui tihendatud ala on pikemat aega vee all, võib hermeetik muutuda kollakaks. Värvimuutus ei mõjuta siiski hermeetiku toimivust.
Lahustipõhise värviga värvimisel võib hermeetiku kuivamisaeg pikeneda.
PENOSIL All Weather Sealant 919 on silikoonivaba koheselt veekindel kautšukipõhine hermeetik, mida saab kasutada kiireteks fassaadi ja katuse remonditöödeks isegi vihma ajal. Nakkub hästi enamiku tavaliste katusekattematerjalidega, saab kanda ka niisketele, kergelt õlistele ja bituumenpindadele.
Omadused:
Suurepärane nakkuvus paljudele pindadele: tellis, betoon, puit, metall, klaas, plastid.
Ei sobi kasutamiseks polüetüleeni (PE), polüpropüleeni (PP) ega PTFE (Teflon®) pindadel.
Ei soovitata loodusliku kivi (nt marmor, graniit) tihendamiseks.
Võib muutuda kollakaks, kui on pikalt vee all – see ei mõjuta toimivust.
PENOSIL All Weather Sealant 919 on silikoonivaba koheselt veekindel kautšukipõhine hermeetik, mida saab kasutada kiireteks fassaadi ja katuse remonditöödeks isegi vihma ajal. Nakkub hästi enamiku tavaliste katusekattematerjalidega, saab kanda ka niisketele, kergelt õlistele ja bituumenpindadele.
Omadused:
Suurepärane nakkuvus paljudele pindadele: tellis, betoon, puit, metall, klaas, plastid.
Ei sobi kasutamiseks polüetüleeni (PE), polüpropüleeni (PP) ega PTFE (Teflon®) pindadel.
Ei soovitata loodusliku kivi (nt marmor, graniit) tihendamiseks.
Võib muutuda kollakaks, kui on pikalt vee all – see ei mõjuta toimivust.
Kasutusvaldkonnad:
Katuse- ja fassaaditööd
Klaasimistööd
Paisumis- ja ühendusvuukide tihendamine
Pakend: 300 ml plastpadrun
Värv: Must
Kitsendused:
Ei nakku polüetüleeni (PE), polüpropüleeni (PP) ega PTFE (Teflon®).
Ärge kasutage temperatuuril alla -5 °C.
Ei ole soovitatav kasutada loodusliku kivi, nt marmori ja graniidi, tihendamiseks.
Kui tihendatud ala on pikemat aega vee all, võib hermeetik muutuda kollakaks. Värvimuutus ei mõjuta siiski hermeetiku toimivust.
Lahustipõhise värviga värvimisel võib hermeetiku kuivamisaeg pikeneda.
PENOSIL AquaBrake Fabric 435 is a polyester-based reinforcement fabric designed for hydro-insulating walls and floors in wet and humid areas such as:
Bathrooms
Saunas
Kitchens
Balconies
Terraces
It enhances the performance of waterproofing mastics and sealants, ensuring a watertight and flexible sealing layer that bridges cracks and prevents moisture penetration.
Key Features:
Completely watertight
Elastic and vapour impermeable
Crack-bridging capability
Suitable for heated floors
Easy to cut and shape
Compatible with Penosil AquaBrake Fiber 640 mastic
For interior and exterior use
Applications:
Reinforcing and sealing:
Floor drains
Pipe penetrations
Wall and floor joints
Corners
Installation Instructions:
Cut the fabric to the required size, allowing 5–7 cm overlap at edges.
Apply the first layer of Penosil AquaBrake Fiber 640 mastic.
Press the fabric into the fresh mastic using a putty trowel, avoiding air bubbles.
Cover with a second layer of mastic, ensuring full immersion.
Special Reinforcement Guidelines:
Corners: Use at least a 20 cm wide strip.
Joints: Use at least a 10 cm wide strip.
Floor traps: Use fabric at least 3× the diameter of the opening, preferably in two layers.
Pipe penetrations: Cut fabric with a diameter 3× larger than the pipe. Make a hole 4–5 mm smaller than the pipe diameter so the fabric overlaps the pipe by 3–5 mm.
Surface Preparation:
Surfaces must be clean, dry, and free of dust, loose particles, and oil residues.
Prime concrete, cement, and plaster surfaces with PENOSIL BetPrimer 603.
PENOSIL AquaBrake Fabric 435 is a reinforcement fabric designed for hydro-insulating walls and floors in wet and humid areas such as:
Bathrooms
Saunas
Kitchens
Balconies
Terraces
It enhances the performance of waterproof sealants and mastics, making it ideal for use before tiling and other finishing works.
Key Features:
Completely watertight
Elastic and vapour impermeable
Bridges cracks
Suitable for heated floors
Easy to use and cut into any shape or size
For interior and exterior use
Applications:
Sealing and reinforcing:
Floor drains
Wall and floor joints
Pipe penetrations
Corners
Installation Instructions:
Cut the fabric to the required size, allowing 5–7 cm overlap at edges if needed.
Apply the first layer of Penosil AquaBrake Fiber 640 mastic.
Press the fabric tightly into the fresh mastic using a putty trowel, avoiding air bubbles.
Cover with a second layer of mastic, ensuring full immersion.
Special Reinforcement Guidelines:
Corners: Use at least a 20 cm wide strip.
Joints: Use at least a 10 cm wide strip.
Floor traps: Use fabric at least 3× the diameter of the opening, preferably in two layers.
Pipe penetrations: Cut fabric with a diameter 3× larger than the pipe. Make a hole 4–5 mm smaller than the pipe diameter so the fabric overlaps the pipe by 3–5 mm.
Surface Preparation:
Surfaces must be clean, dry, and free of dust, loose particles, and oil.
Prime concrete, cement, and plaster surfaces with PENOSIL BetPrimer 603 before applying.
Protection Class: IPX4 (safe for light rain conditions)
Control: Mechanical thermostat
Safety: Flame sensor, automatic shut-off when fuel runs out
Material: Stainless steel combustion chamber
Dimensions:
Width: 32 cm
Depth: 77 cm
Height: 42 cm
Weight: 14 kg
Applications:
Ideal for heating large workshops, warehouses, construction sites, and similar spaces. Note: This model does not have wheels, so it must be carried manually.
Penosil Painter’s Silicone 611 is a one-component, paintable, elastic finishing sealant designed for sealing and filling movable joints prior to painting. It provides a smooth, bright white finish and remains permanently flexible, making it ideal for applications where traditional acrylic sealants may crack.
The sealant can be painted over shortly after application, allowing faster completion of finishing works. Its water-based, low-odour formula is user- and environmentally friendly, and tools can be easily cleaned with water.
Painter’s Silicone 611 offers excellent adhesion to most common building materials and is suitable for both interior and exterior use. The cured seal maintains elasticity and appearance over time, even when exposed to temperature changes and structural movement.
Key Features:
Paintable elastic sealant for movable joints
Permanently flexible with movement capability up to ±12.5%
Smooth, bright white surface for high-quality finishing
Low odour, water-based formulation
Good UV and weather resistance
Easy application and smoothing
Tools clean easily with water
Typical Applications:
Joints between walls and ceilings
Corners and angles
Connections between window or door frames and walls
PENOSIL Roof&Facade Crystal Sealant 724 on läbipaistev hübriidhermeetik parandus- ja renoveerimistöödeks välistingimustes.
Kasutusalad:
Korstnate, torude, metalli ja betooni vaheliste vuukide, vihmaveerennide ühenduste, fassaadi paisumisvuukide ning välisakende ja -uste lengide tihendamiseks ja ilmastikukindluse tagamiseks.
Igat tüüpi õhutihedate vuukide tihendamiseks, nii seest kui ka väljast.
The 90-069 electric heater is a portable heat source designed to heat rooms such as workshops, garages, households, and shops. The heating element of the device is made of stainless steel, which provides protection against overheating. The IPX4 water resistance class allows the device to be used in damp and wet connections. The heater has an insulated plastic handle for easy portability. Powder coated metal housing protects the device against rust. The heater is characterized by high efficiency with a small footprint. Characteristic features: power 5kW; heating element: stainless steel; adjustable thermostat; adjustable angle of setting; protection against overheating; fan; full metal housing; strong and durable structure; insulated, safe handle; portable, free-standing.
