T-shirt Camo URBAN, size S

GRAPHITE's 83mm bi-metal hole saw 56T719 is 44mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 105 rpm, Inox steel - 50 rpm, aluminium - 155 rpm, wood - 140 rpm, cast iron - 70 rpm, brass - 140 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

Two GRAPHITE guide rails with a length of 700 mm each, allow parallel penetration of the cutting disc and free and even guidance of the sawing and lapping machines. High quality aluminum strips are equipped with a rubber anti-splinter insert, teflon slides, and a special non-slip tape mounted on the underside of the strips, which significantly increases comfort and safety of work. On the first use, the rubber bar will automatically adjust to the tool used. It is possible to quickly connect two rails when cutting long materials using a self-aligning connecting element. It is possible to fasten the rails to the surface using dedicated clamps, which enables precise and accurate cutting of the material. The attached slats for the cut surface allow the user to focus on the work to achieve the desired cutting effect. Thanks to specially profiled grooves, the clamps do not interfere during work. The guide rail is dedicated for use together with the GRAPHITE circular saw.

HSS metal drill bit, DIN 338, 9 mm 54T999 by GRAPHITE is a metal accessory characterised by a diameter of 9 mm, an overall length of 125 mm and a working part length of 81 mm. The drill bit is made from HSS high speed steel. It has a cylindrical shank and a 118° drill sharpening angle. It is DIN 338 compliant and will be suitable for every DIY enthusiast.

GRAPHITE's 41mm bi-metal hole saw 56T710 is 44mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 210 rpm, Inox steel - 105 rpm, aluminium - 315 rpm, wood - 230 rpm, cast iron - 140 rpm, brass - 280 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

NEO working flannel shirt (ref. no. 81-540) is made of combed cotton yarn (100% cotton). Special combing process makes it soft to touch. Double back yoke outreaching to arms strengthens zones exposed to abrasion. The product is made of fabric resistant to creasing, and always looks great. Oblique cut chest pocket is more resistant to loads. Double pleat at the front ensures button holes are more stable and easier to use. Profiled bottom finish gives urban style. Stiffened collar and cuffs do not deform during use.