Plug Toggler Alligator with collar 6mm + screws, 5pcs

The S1PL SR half boots, ESD, composite toecap, Kevlar insole, size 39, 82-163-41 by NEO TOOLS are S1PL SR half boots, equipped with a composite toecap and a practical Kevlar anti-puncture insole. The upper of the footwear is made of mesh and microfibre, its lining is made of knitted mesh, the sole is made of PU/PU and the insole is made of EVA foam. The footwear is characterised by anti-electrostatic properties with a narrow range of electric resistance (from 0.75 MΩ to 35 MΩ) - it dissipates electric charges. The shoe belongs to the protective category S1PL SR, where SR stands for slip resistance on SLS-coated ceramic ground and on glycerol-coated steel ground. The toecap of the NEO TOOLS work boots, in turn, provides protection against impacts with an energy equivalent to 200J. The footwear is puncture resistant, but also resistant to oil, petrol and other organic solvents. It has energy absorption in the heel area and a flexible upper that adapts well to the foot. The boots are characterised by breathability. They are recommended for industries in the following specialisations: electronics, computer, chemical, automotive, pharmaceutical, optical, food, aviation and petrochemical. NEO TOOL half-boots are CE certified.

The saw blade, widia, 215 x 30 mm, 60 teeth, for aluminium 61-194 by NEO TOOLS is equipped with 60 teeth, 2.4 mm x 1.6 mm, made of TCT carbide. The TCG tooth, with its special geometry and wide comb section, guarantees increased load resistance. The NEO TOOLS brand disc in manganese steel MN65 reaches a maximum speed of up to 8,500 rpm. Three rings are included, allowing reduction to dimensions: 30 x 25.4 mm, 30 x 20 mm and 30 x 16 mm. The NEO TOOLS blade is designed for cutting aluminium profiles and other non-ferrous metals. The tool ensures clean and precise work.

Sanding papers 93 x 230 mm, P40, 5 pieces, without holes 58T255 by GRAPHITE are P40-graded papers suitable for sanding metal, wood and plastic. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures adequate performance. GRAPHITE sanding papers are offered in a practical set of 5.

Yellow sanding paper in roll 2.5 m x 115 mm, P220, 58T427 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both manual and machine sanding - including with orbital sanders and gypsum sanding trowels.

Screwdriver socket set 5/6/7/8/9/10/11/13 mm, 1/4" HEX, 8 pieces 56T569 by GRAPHITE is a set of screwdriver sockets designed for screwing and unscrewing screws and other threaded parts. The set includes 8 sockets in sizes 5, 6, 7, 8, 9, 10, 11 and 13 mm, equipped with a 1/4" HEX handle, which facilitates stable seating while working. The sockets are made of CrV steel. The different sizes allow the set to be used for a variety of bolt-handling tasks with different diameters, so the GRAPHITE brand set proves to be a practical accessory for the workshop and toolbox.