Аксессуары и запасные запчасти
51-3050633
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
51-6800005
- Fire retardant
- Made from polyether-based polyurethane
- Surface: studded
- Underside: studded, for maximum standing comfort and slip resistance
- Ergonomic floor covering for standing workstations
- Oil and petrol resistant
- 5-year guarantee
Made in Germany
ManufacturerStürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
51-3050632
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
51-3872100
- Very good adhesion
- Tool life is increased
- speeds up the work process - improves chip flow
- can be used for drilling, cutting, broaching, etc.
- for steel, stainless steel, non-ferrous metal, etc.
- for machine and manual processing
ManufacturerOPN-CHEMIE OTTO PETRI GmbH
In der Au 14, 57290 Neunkirchen
info@opn-chemie.de
51-3352042
- Slip clutch 4-stage adjustable
ManufacturerOptimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
51-6800006
- Fire retardant
- Made from polyether-based polyurethane
- Surface: studded
- Underside: studded, for maximum standing comfort and slip resistance
- Ergonomic floor covering for standing workstations
- Oil and petrol resistant
- 5-year guarantee
Made in Germany
ManufacturerStürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
51-3050610
- Concentricity better than 0.06 mm
ManufacturerOptimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
51-3201021
- Nach DIN 338 HSS-CO 5%
- Vierflächige 135°-Kreuzanschliff ermöglicht eine ausgezeichnete Selbst-Zentrierung
- Verbesserte Werkzeugstandzeit durch Legierungsbestandteile
- Hohe Geschwindigkeits-/ Vorschubeigenschaften
- Starke Kernkonstruktion optimiert die strukturelle Festigkeit des Bohrers und minimiert das Risiko eines Bohrerbruchs
- Praktische OPTIMUM Kunststoffkassette
ManufacturerOptimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
51-6800001
- Fire retardant
- Made from polyether-based polyurethane
- Surface: studded
- Underside: studded, for maximum standing comfort and slip resistance
- Ergonomic floor covering for standing workstations
- Oil and petrol resistant
- 5-year guarantee
Made in Germany
ManufacturerStürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de
Недавно просмотренные товары
51-3427010
- Precise processing
- Powerful, maintenance-free engine
- Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
- Smooth-running feed gear with rounded gears running in an oil bath
- Hardened and ground Z-axis guideway
- Guaranteed concentricity of the spindle nose better than 0.009 mm
- Concentricity on the lathe chuck better than 0.04 mm
- Automatic longitudinal / lead screw drive
- Lead screw for thread cutting or automatic longitudinal turning
- Quadruple tool holder
- All guides can be adjusted by wedge strips
- Right / left rotation in the control panel switchable
- Hardened main spindle mounted in adjustable precision tapered roller bearings
- Tapered roller bearings in P5 quality
- Hardened spindle nose with Ø 26 mm spindle bore
- Rolled trapezoid spindles
- Chip protection on the upper slide
- Upper slide on cross slide slidable
- Tailstock for taper turning ± 5 mm adjustable
- Tailstock quill and handwheel with adjustable fine scale 0.02 mm
- Fast, easy and tool-free adjustment by means of a clamping lever
- Leadscrew stored in two sintered bearings
- Change gear set in standard scope of supply for thread cutting
- Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
- thrust bearing
- 3-jaw lathe chuck in the standard scope of delivery
- Emergency stop impact switch
- Fully equipped, allowing the user to be productive immediately after commissioning
- Speed change easily adjustable via potentiometer
- Digital speed display
- EMC filter class C1
ManufacturerOptimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
51-3385064
- With prismatic sole for aligning horizontal surfaces and waves
- The compact and tension-free installation of the longitudinal spirit level ensures consistent accuracy
- Accuracy 0.02 mm / m
- Longitudinal level and transverse level according to DIN 2276 Form B
- No time-consuming adjustment work
- Thermally stable handle
- Dimensions: 200 mm x 46 mm x 46 mm
ManufacturerOptimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
51-3383845
- Radius / Diameter mode
- Parameter memory
- Inch / metric adjustment
- Multifunction LCD display
- Adjustable angle measurement
- Absolute / incremental
- 8-digit LCD display
- Coordinate conversion
ManufacturerOptimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
51-3383975
- Digital 3-axis position display for milling machines (X-Y-Z) and for lathes (X, Z, Z0)
- For measuring positions
- Speed display
- Three incremental inputs
- Four-line LCD display
- User-friendly menu navigation
- Sturdy aluminum housing
- Front-side programming
- Dimensions length 98 mm x width 65 mm x height 134 mm
- power Supply
ManufacturerOptimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
51-3384029
Details- LED display
- Higher working accuracy
- Significant reduction of production times
- Error rate is reduced
- Included sensor for recording spindle speeds
- Switchable from turning to milling machines
- Ergonomic membrane keyboard, protected against dust and splash water
Especially for lathes- Diameter or radius display
- Display of Z0 and Z1 axes with addition function, separately or together possible especially for milling machines
- Trigonomic function (sin, cos, tan)
- Pitch circle calculation with single coordinate indication
Application- for precise, fast and safe production
- Fast setup through exact positioning for mounting on lathes, milling machines, drilling machines, etc. for measuring traverse paths
- No parallax or reading errors
- Absolute repeatability
Possible functions- Calculator
- Speed display,
- Axis coupling (sum Z)
- Sub D connector sockets
- Absolute/incremental operation
- Conversion inch/metric thread
- Bolt circle calculator (chain dimension)
- Coordinates in circle (pitch circle)
- Holes in circle (pitch circle)
- Measured values radius/diameter switchable
- Zero reset data preset
- Self-diagnosis
- Reference point
- Linear error compensation
- 99 tool memories
suitable for- OPTIMUM lathes
- OPTIMUM milling machines
NoteWhen retrofitting position indicators and measuring bars for lathes and milling machines, holes and threads must be provided on the machine by the customer.
ManufacturerOptimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
