Silicone half-mask + 2x A1P2 absorber, 97-353 by NEO TOOLS is a set including silicone half-mask 97-350 by NEO TOOLS and two A1P2 absorbers, 97-363 by NEO TOOLS. It provides protection against gases and vapours of organic substances whose boiling point is higher than 65°C. Protects against dusts, fumes and mists. Captures vapours of alcohols, aldehydes, esters, ethers, ketones, organic acids and styrene - at a total concentration by volume not exceeding 0.1%. The most common applications for this NEO TOOLS kit are protection against aerosols in paints and varnishes, glutaraldehyde, acetic acid, pesticides, dimethyl sulphate, kitchen fumes, combustion engine fumes, etc. The kit is CE certified to EN140 and EN14387.
Silicone half-mask + 2x absorber A1, 97-352 by NEO TOOLS is a set including silicone half-mask 97-350 by NEO TOOLS and two absorbers A1, 97-360 by NEO TOOLS. Provides protection against gases and vapours of organic substances whose boiling point is higher than 65°C. Captures vapours of alcohols, aldehydes, esters, ethers, ketones, organic acids and styrene - at a total concentration by volume not exceeding 0.1%. The kit is CE certified to EN140 and EN14387.
Silicone half-mask + 2x P3 filter, 97-351 by NEO TOOLS is a set including silicone half-mask 97-350 by NEO TOOLS and two pieces of P3 filters, 97-361 by NEO TOOLS. It provides protection against aerosols containing solid particles (dusts), fumes and liquid mists, as long as the concentration of the dispersed phase of the aerosol does not exceed 20xNDS. The most common applications are mining, stonemasonry and carpentry work, as well as bulk handling or fertiliser operations. The kit is CE certified to En140 and EN143 standards.
Dust protection half-mask with active carbon and valve (ref.no. 97-311) provides dust protection for respiratory system during works that require high physical effort. Valves improve breathing by reducing inhalation resistance, while reducing amount of carbon dioxide and water vapours under the mask. FFP1 mark informs about indications for use, when concentration of harmful substances does not exceed 4 times of maximum permissible concentration. CE mark is a safety warranty and proves that the product meets all European requirements. Brand NEO meets expectations of professionals
Dust protection half-mask with active carbon (ref.no. 97-300) provides dust protection for respiratory system during works that require high physical effort. FFP2 mark informs about indications for use, when concentration of harmful substances does not exceed ten times of maximum permissible concentration. CE mark is a safety warranty and proves that the product meets all European requirements. Brand NEO meets expectations of professionals.
ABEK1 NR NEO absorbing cartridge (ref. no. 97-362) provides protection of respiratory tract against organic, inorganic, acidic and ammonia gases. For use with NEO 97-350 half mask. CE mark is a safety warranty and proves that the product meets all European requirements. NEO brand meets expectations of professionals.
P3 R NEO filter (ref. no. 97-361) provides respiratory tract protection against dust and small particles. For use with NEO 97-350 half mask. CE mark is a safety warranty and proves that the product meets all European requirements. NEO brand meets expectations of professionals.
Absorber A1P2 R, 97-363 by NEO TOOLS is a canister for use with NEO TOOLS half-mask 97-350, which provides protection against gases and vapours of organic substances with a boiling point above 65 °C and against dusts, fumes and mists. The permissible concentration of vapours and gases is 0.1% by volume and the concentration of the dispersed aerosol phase is up to 10×NDS. Common applications include protection against paint and lacquer aerosols, glutaraldehyde, pesticides, acetic acid, dimethyl sulphate, combustion engine fumes and cooking fumes. The product is CE certified in accordance with EN 14387.
NEO silicone half mask (ref. no. 97-350) provides respiratory tract protection from various risks depending on attached absorbers or filters. Supplied without absorbers, it allows for best choice regarding existing dangers. CE mark is a safety warranty and proves that the product meets all European requirements. NEO brand meets expectations of professionals.
A1 NR NEO absorbing cartridge (ref. no. 97-360) provides respiratory tract protection against organic vapours. For use with NEO 97-350 half mask. CE mark is a safety warranty and proves that the product meets all European requirements. NEO brand meets expectations of professionals.
Disposable dust respirator FFP2, 3 pieces, CE 97-302 by NEO TOOLS is a disposable dust respirator of FFP2 class in a set of 3 pieces, which is a category III PPE. Made of polypropylene, it is designed to protect the upper respiratory tract. It is characterised by high filtration efficiency, trapping 94% of particles with a diameter of 0.3 μm or more; including dusts, fumes, aerosols, highly toxic liquids and bacteria and viruses. It uses foam on the inside of the upper part and an aluminium slat on the outside, improving the fit to the face and increasing comfort. The NEO TOOLS half-mask fits well to the face, providing effective protection.
Dust respirator, FFP3, with valve, 3 pieces, CE, 97-322 by NEO TOOLS is a set of 3 protective half-masks, classified as protection category III, made of polypropylene. It is a model of filtration efficiency class FFP3 with an exhalation valve, providing excellent protection of the upper respiratory tract and high filtration efficiency of harmful particles of dust, fumes, aerosol, highly toxic liquids, as well as bacteria and viruses. The filtration efficiency is 99% of particles. The upper part on the outside features an aluminium strip for a better fit and comfort, and a silicone gasket on the inside for a better seal and safety. There is an exhalation valve in the middle of the mask to facilitate exhalation of air, reduce humidity and temperature inside the mask and improve comfort during prolonged use. The NEO TOOLS half mask is characterised by a perfect fit to the face and is CE certified.
Folding respirator FFP2, with valve, 3 pieces, CE 97-304 by NEO TOOLS is a set of 3 pieces of dust respirators, classified as protection category III and made of polypropylene. The respirator offers a filtration efficiency class of FFP2 and provides excellent protection for the upper respiratory tract, effectively filtering harmful particles of dust, fumes, aerosol, highly toxic liquids, as well as bacteria and viruses. It stops 94% of particles with a diameter of 0.3 μm or larger. It uses foam on the upper side on the inside and an aluminium strip on the outside, which translates into a better fit, comfort and excellent adherence to the face. There is an exhalation valve on the side of the mask, which makes it easier to exhale air, reduces humidity and temperature inside the mask and improves comfort during prolonged use. The NEO TOOLS brand product is CE certified.
Dust respirator with 1 valve FFP2, 3 pieces, CE 97-303 by NEO TOOLS is a half-mask belonging to the individual protection category III, made of polypropylene, designed to protect the upper respiratory tract. It is characterised by high filtration efficiency, stopping up to 94% of particles with a diameter of 0.3 μm or more - including dusts, fumes, aerosols, highly toxic liquids and bacteria and viruses. It uses foam on the inside of the upper part and an aluminium strip on the outside to improve fit and comfort. There is an exhalation valve in the middle of the NEO TOOLS mask to facilitate exhalation of air, reduce humidity and temperature inside the mask and improve comfort during prolonged use. The respirator fits well to the face and the CE certificate confirms compliance with safety requirements.
