Hydraulically controlled system for both vices, the movement of the material feed and the up and down movement of the saw arm
Precise material feed via recirculating ball screw
Frequency converter as standard for infinitely variable adjustment of the saw blade speed from 20 - 100 m/min
BRP - saw blade monitoring
Cutting sensor as standard
The jaws of the two clamping vices are equipped with long-stroke hydraulic cylinders as standard, eliminating the need to preset them to the material cross-section to be sawn
Pivoting cutting gap for mitre adjustment - does not cut into the saw table
Robust band guides with adjustable carbide plates for a precise cut
Digital angle display
Chip clearing brush for optimum cleaning and maintenance of the saw blade
Two-column guided horizontal saw for sawing solid bars and bar profiles
Mitsubishi FX 5 control system with simple operation via 4.3" touchscreen
Cutting movement via hydraulic cylinder
With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
Automatic positioning after entering the desired angle
Hydraulic clamping of the turntable enables precise angular cutting
Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
Infinitely variable cutting speed from 15 - 150 m/min
Saw blade drive via bevel gearbox, asynchronous motor and frequency inverter
For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
Front band guide moves automatically parallel to the movable vice jaw
chip clearing brush driven via belt roller
Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
Two-column guided band saw for sawing solid bar material and bar profilesMitsubishi
FX 5 control system with simple operation via 4.3" touchscreenCutting movement
via hydraulic cylindersWith
BRP (cutting feed control): if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continuesRobust
machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performanceInfinitely variable
cutting speed from 15 - 150 m/minSaw blade drive
via bevel gearbox, Asynchronous motor and frequency converterClamping
of the material in front of and behind the cut by means of a two-part vicePressure adjustment
of the hydraulic vice clamping via control valve with pressure gaugeSaw blade inclination
of 7° and hydraulic saw blade tensioning increase the service life of the saw
bladeFront
blade
guide moves automatically parallel to the moving
saw blade
Band guide moves automatically parallel to the moving vice jawElectrically
driven chip clearing brushEmulsion cooling
with liquid distribution into the saw band guides and directly into the cutting channelMore powerful
No need to set the upper end point with the cut-off button
Efficient coolant application on the saw band guides
Monitoring of the saw blade run by BRP system
Monitoring the saw blade tension
Longer service life of saw blade due to saw arm inclination of 25 °
For sawing pipes and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
Mitre adjustment from -45° to +60°, user-friendly adjustment from the front for better handling, especially with attached roller conveyor
Bearing-mounted turntable
Infinitely variable adjustment of the belt speed
Robust belt guides with adjustable carbide plates for a precise cut
Longer service life of the saw blade thanks to 25° saw arm inclination
Saw blade guides with integrated cooling system
BRP saw blade monitoring stops the feed of the saw frame if the saw blade motor is overloaded by chips in the cutting channel; once the chips have been removed by the running saw blade, the feed continues automatically
Electromechanical monitoring of the saw blade tension, a microswitch switches the machine off in the event of deviations
Chip clearing brush for optimum cleaning and maintenance of the saw blade
Hydraulic clamping vice
Saw frame can be lowered hydraulically
With swivel-mounted control panel
Cut sensing function with integrated button
Functionality of the semi-automatic machine:
Automatic workpiece clamping after the start of the cutting cycle
Execution of the saw cut at the selected belt speed
Automatic stop of the lowering movement and the saw blade in the lower end position
Automatic return of the saw arm to its upper end position
For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
Robust band guides with adjustable carbide plates for a precise cut
Hydraulically controlled system for both clamping vices and the up and down movement of the saw arm
With chip clearing brush for optimum cleaning and maintenance of the saw band
Saw arm inclined by 25°, This extends the service life of the saw blade
BRP - saw blade monitoring
The jaws of the two clamping vices are equipped with long-stroke hydraulic cylinders as standard, This eliminates the need for pre-setting to the material cross-section to be sawn
With pivoting cutting gap for mitre adjustment - does not cut into the saw tableMaterial is fed
Two-column guided horizontal saw for sawing solid bars and bar profiles
Mitsubishi FX 5 control system with simple operation via 4.3" touchscreen
Cutting movement via hydraulic cylinder
With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
Automatic positioning after entering the desired angle
Hydraulic clamping of the turntable enables precise angular cutting
Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
Infinitely variable cutting speed from 15 - 150 m/min
Saw blade drive via bevel gearbox, asynchronous motor and frequency inverter
For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
Front band guide moves automatically parallel to the movable vice jaw
chip clearing brush driven via belt roller
Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
