Metal band saws

• Impressively quiet!
• Highest life
• Infinitely 30-80 m / min
• Use of coolant on all models possible

• Ideal for sawing steel, aluminum, copper, PVC and Teflon
• Stepless, electronic speed control from 30 - 80 m / min
• Particularly quiet - up to 60% quieter than comparable band saws
• Low vibration and wear thanks to special gearbox with two large gears made of hardened steel
• Guaranteed cutting accuracy of max. 0.3 mm course over 100 mm cutting length
• Each machine individually tested for precision in Italy
• Low-speed DC drive motor with carbon brushes for up to 10 times longer life
• Electronic temperature and ampere recording monitoring against overload
• Cast strip wheels with ground running surface without rubber pads, therefore suitable for dry and wet cutting
• Massive saw bar made of die-cast aluminum (readjustable from MBS 125) and with sturdy transport lock
• Two movable, adjustable saw band guides with chip scraper made of metal
• Particularly stable base plate with non-slip feet
• Very service-friendly, as components are easily accessible

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Two-column guided bandsaw for sawing solid bars and bar profiles
• Mitsubishi FX 5 control system with simple operation via 7" touchscreen
• With 700 mm material feed as standard
• Cutting movement via hydraulic cylinder
• With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency converter
• Material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• front band guide moves automatically parallel to the movable vice jaw
• Electrically driven chip clearing brush
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• With automatic material feed: frequency-controlled feed via circulation spindle; optical sensor recognizes when no more material is inserted and pauses the material feed
• With chip conveyor and chip container as standard
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Two-column guided bandsaw for sawing solid bars and bar profiles
• Mitsubishi FX 5 control system with simple operation via 7" touchscreen
• With 700 mm material feed as standard
• Cutting movement via hydraulic cylinder
• With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency converter
• Material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• front band guide moves automatically parallel to the movable vice jaw
• Electrically driven chip clearing brush
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• With automatic material feed: frequency-controlled feed via circulation spindle; optical sensor recognizes when no more material is inserted and pauses the material feed
• With chip conveyor and chip container as standard
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Extremely stable construction, entire machine body made of steel
• User-friendly operating concept
• Speed infinitely variable via inverter - Greater ease of operation and no need to replace wearing parts such as V-belts
• Combined micro-spray and blow-off device, for blowing off chips and lubricating the saw blade
• Tiltable working table made of cast iron
• Workplace lighting as standard
• Equipped with motor brake
• Belt tension and speed indicator
• Integrated band welding unit with annealing, cutting and grinding device
• Height adjustment of saw band guide by hand wheel
• VMBS I E models with electric table feed

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Miter adjustment from -45° to +60° from the front, thus better handling with attached roller conveyor
• Robust band guides with adjustable carbide plates for a precise cut
• Saw band guides with cooling system
• Monitoring of saw band tension electromechanically via microswitch
• With chip clearing brush for optimal cleaning and maintenance of the saw band
• Lowering of the saw arm by gravity
• Rotary table with pivoting cutting gap: No cutting into the saw table, thus always a flat support surface and thus higher cutting accuracy

• Miter adjustment from -45° to +60° user-friendly adjustment from the front for better handling, especially with attached roller conveyor
• Robust band guides with adjustable carbide plates for a precise cut
• Saw blade guides with integrated cooling system
• Electromechanical monitoring of the saw blade tension via microswitch
• With chip clearing brush for optimum cleaning and maintenance of the saw blade
• When the saw arm is raised, the lowering cylinder locks automatically in the upper position - no additional locking on the cylinder is required
• Saw arm tilted by 25°, thus extending the service life of the saw blade
• The saw blade stops automatically at the end of the cutting process
• The saw arm is lowered by gravity
• Turntable with pivoting cutting gap prevents cutting into the saw table
• Ergonomic operating concept
• Vice with quick clamping device

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Two-column guided band saw for sawing solid bars and bar profiles
• Siemens S7-1500 control system with wide range of functions and operation via 7" touch display
• Cutting movement via rotating spindle and servo motor
• With ARP (automatic cutting feed control) -> Automatic saw blade feed depending on the material resistance. Feed speed is constantly adapted to the current cutting load. ARP enables shorter work processes and at the same time longer service life of the saw bands
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency converter
• Material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• Electrically driven chip clearing brush
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Two-column guided band saw for sawing solid bars and bar profiles
• Siemens S7-1500 control system with wide range of functions and operation via 7" touch display
• Cutting movement via rotating spindle and servo motor
• With ARP (automatic cutting feed control) -> Automatic saw blade feed depending on the material resistance. Feed speed is constantly adapted to the current cutting load. ARP enables shorter work processes and at the same time longer service life of the saw bands
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency converter
• Material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• Electrically driven chip clearing brush
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Quiet running
• Heavy cast iron version
• Hard carbide guide
• High cutting accuracy due to vibration-free running
• Double miter
• DIN EN 55011: EMC class C2
• Double-channel safety chain with quick stop in case of emergency hold
• Variably adjustable saw blade speed
• Variable by frequency inverter
• Professional inverter technology
• High motor power even at low speeds
• Microswitch for automatic limit switch-off
• Precise, readjustable and long-lasting saw blade guide
• End stops adjustable to the degree
• Chips brush
• Coolant pump
• Quick clamping vice adjustable via handwheel. Clamping of the workpiece with handy quick-action clamping lever
• Stable machine base
• Operating unit simplifies machine settings
• Completely equipped, enabling the user to work productively immediately after commissioning
• Infinitely adjustable saw band speed 15 - 90 m/min

Converter

• Siemens Sinamics G110M

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Linear guides on both columns ensure a perfect cutting result
• Robust three-phase motor with overload protection
• The vice is equipped with a long-stroke cylinder to compensate for larger cross-section differences
• Belt guide with adjustable carbide plates
• Hydraulic regulation of the vice pressure
• Operation on modern and powerful Siemens HMI multi-touch panel

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Two-column guided band saw for sawing solid bars and bar profiles
• Siemens S7-1500 control system with a wide range of functions and operation via a large 7" touch display
• With 700 mm material feed as standard
• Cutting movement via rotating spindle and servo motor
• With ARP (automatic cutting feed control) -> Automatic saw blade feed depending on the material resistance. Feed speed is constantly adapted to the current cutting load. ARP enables shorter work processes and a longer service life for the saw bands.
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency converter
• Material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• front band guide moves automatically parallel to the movable vice jaw
• Electrically driven chip clearing brush
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• With automatic material feed: frequency-controlled feed via circulating spindle and servomotor; optical sensor detects when no more material is inserted and pauses the material feed
• With chip conveyor and chip container as standard
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Heavy industrial version
• Quiet running
• High cutting accuracy due to vibration-free running
• Mitration adjustment -45° to 60° by swivelling the entire saw bow
• Serially with high-quality bi-metalSaw band
• Micro switch for automatic limit switch
• Coolant pump
• Ball bearing saw band guide with carbide plates for optimum cutting results
li>Simple adjustment of lowering speed by means of feed control valve in control panel
• Large dimensioned quick-action vice laterally movable
• Clear control panel

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• With 2-speed gearbox

• Extremely stable construction, entire machine body made of steel
• User-friendly operating concept
• With workplace lighting
• Tilting work table made of gray cast iron
• Speed ​​continuously adjustable
• Tape tension and tape speed indicator
• Blower for sawdust
• Integrated band welding unit with annealing, cutting and grinding device
• With rip fence

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Two-column guided bandsaw for sawing solid bars and bar profiles
• Mitsubishi FX 5 control system with simple operation via 7" touchscreen
• With 2000 mm material feed as standard
• Cutting movement via hydraulic cylinder
• With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency converter
• Material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• front band guide moves automatically parallel to the movable vice jaw
• Electrically driven chip clearing brush
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• With automatic material feed: frequency-controlled feed via circulating spindle; optical sensor detects when no more material is inserted and pauses the material feed
• With chip conveyor and chip container as standard
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Quick clamping vice for fast workpiece clamping
• Saw bow can be swivelled from 0° to 45°, to enable angular saw cuts
• Good readable scale for angle adjustment
• Microswitch for automatic limit switch
• Automatic lowering of the saw bow via three-stage adjustable saw bow lowering pressure
• Serially with high-quality bi-metal saw band
• Large, handy handle and low weight enable problem-free transport to the construction site
• Adjustable material stop for serial work
• Completely equipped, enabling the user to work productively immediately after commissioning
• Transport security

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Two-column guided band saw for sawing solid bars and bar profiles
• Siemens S7-1500 control system with a wide range of functions and operation via a large 7" touch display
• With 2000 mm material feed as standard
• Cutting movement via rotating spindle and servo motor
• With ARP (automatic cutting feed control) -> Automatic saw blade feed depending on the material resistance. Feed speed is constantly adapted to the current cutting load. ARP enables shorter work processes and a longer service life for the saw bands.
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency converter
• Material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• front band guide moves automatically parallel to the movable vice jaw
• Electrically driven chip clearing brush
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• With automatic material feed: frequency-controlled feed via circulating spindle and servomotor; optical sensor detects when no more material is inserted and pauses the material feed
• With chip conveyor and chip container as standard
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de