The electronic measuring components of the measuring strips are protected and sealed in the housing
Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
Tolerant against vibrations and magnetic interference
Without mounting
Note: Adjustments may have to be made to the machine for mounting the measuring bars Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
The electronic measuring components of the measuring strips are protected and sealed in the housing
Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
Tolerant against vibrations and magnetic interference
Without mounting
Note: Adjustments may have to be made to the machine for mounting the measuring bars Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
The electronic measuring components of the measuring strips are protected and sealed in the housing
Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
Tolerant against vibrations and magnetic interference
Without mounting
Note: Adjustments may have to be made to the machine for mounting the measuring bars Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
Ergonomic membrane keyboard, protected against dust and splash water
Especially for lathes
Diameter or radius display
Display of Z0 and Z1 axes with addition function, separately or together possible especially for milling machines
Trigonomic function (sin, cos, tan)
Pitch circle calculation with single coordinate indication
Application
for precise, fast and safe production
Fast setup through exact positioning for mounting on lathes, milling machines, drilling machines, etc. for measuring traverse paths
No parallax or reading errors
Absolute repeatability
Possible functions
Calculator
Speed display,
Axis coupling (sum Z)
Sub D connector sockets
Absolute/incremental operation
Conversion inch/metric thread
Bolt circle calculator (chain dimension)
Coordinates in circle (pitch circle)
Holes in circle (pitch circle)
Measured values radius/diameter switchable
Zero reset data preset
Self-diagnosis
Reference point
Linear error compensation
99 tool memories
suitable for
OPTIMUM lathes
OPTIMUM milling machines
Note
When retrofitting position indicators and measuring bars for lathes and milling machines, holes and threads must be provided on the machine by the customer. Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
Handwheels with adjustable fine scale 0.04 / 0.02 mm
All guides can be adjusted by wedge strips
Adjustment range upper slide ± 90 °
Guaranteed concentricity of the spindle nose better than 0.015 mm
Main spindle running in oil bath
Gear wheels smooth, hardened and ground with 2 adjustable precision tapered roller bearings
Handwheels decoupled and tested according to EN 23125
Two-channel right-left switch tested to EN 23125
Switch with life cycle calculation, tested according to EN ISO 13849
All metric pitches in the range of 0.2 to 14 mm / rev and all inch threads in the range of 72 - 2 pitch per inch are adjustable without change of the change gears by lever in the control panel
Right / left rotation on bed carriage via switching spindle switchable
Central lubrication in the bed slide
Substructure and machine bed made of casted Meehanite cast in one piece
leading spindle
Emergency stop device with foot control
Safety handwheels with release function in the X and Z axis
Tailstock for taper turning ± 10 mm adjustable
Tailstock quill and hand wheel with adjustable fine scale 0.025 mm
Fast, easy and tool-free adjustment by means of a clamping lever
Strongly ribbed prism bed, induction hardened and precision ground from gray cast iron
Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
LED machine lamp in chip protection
Siemens Sinamics Frequency Inverter / Safety Integrated
Quick change steel holder 5-B
Steel holder 20 x 100 type D for square chisel 18 mm
The electronic measuring components of the measuring strips are protected and sealed in the housing
Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
Tolerant against vibrations and magnetic interference
Without mounting
Note: Adjustments may have to be made to the machine for mounting the measuring bars Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
The electronic measuring components of the measuring strips are protected and sealed in the housing
Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
Tolerant against vibrations and magnetic interference
Without mounting
Note: Adjustments may have to be made to the machine for mounting the measuring bars Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
Guaranteed concentricity of the spindle nose better than 0.015 mm
Spindle holder Camlock DIN ISO 702-2 No. 6
Lead screw cover
Precisely machined slide
All guides can be adjusted using wedge strips
Right/left rotation on bed slide switchable via switching spindle
Two-channel safety electronics
Central lubrication in the bed slide
Upper slide adjustment range ± 90
Main spindle runs in oil bath
Smooth-running gear wheels, hardened and ground with 2 adjustable precision tapered roller bearings
Switch with life cycle calculation, tested in accordance with EN ISO 13849
All metric pitches in the range from 0.2 to 14 mm/rev and all inch threads in the range from 72 - 2 threads per inch can be adjusted without replacing the change gears using the switch lever in the control panel
Handwheels with adjustable fine scaling 0.04 / 0.02 mm
Safety handwheels with disengagement function according to EN23125 in the X- and Z-axis
Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
Coolant system with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
Substructure and machine bed cast in one piece from Meehanite cast iron
The electronic measuring components of the measuring strips are protected and sealed in the housing
Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
Tolerant against vibrations and magnetic interference
Without mounting
Note: Adjustments may have to be made to the machine for mounting the measuring bars Manufacturer Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany info@optimum-maschinen.de
