Filters
Sort by Position Name: A to Z Name: Z to A Price: Low to High Price: High to Low Created on Sku: A to Z Sku: Z to A
Display 12 20 24 100 per page
Add to compare list Add to wishlist
51-3384429
The electronic measuring components of the measuring strips are protected and sealed in the housing Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids Tolerant against vibrations and magnetic interference Without mounting Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
Add to compare list Add to wishlist
51-3889100
Manufacturer
Add to compare list Add to wishlist
51-3432462
Machine bed made of heavily ribbed cast iron One-piece machine base made of steel High rigidity of the headstock housing thanks to heavily ribbed 25GG casting All gear wheels of the feed gear made of hardened steel Shafts on needle bearings, all components are lubricated in an oil bath Hardened and ground face spindle ensures enormous accuracy and durability High chip removal during roughing is no problem thanks to the high cutting capacity Service-friendly removable rear panel Energy chain for gentle cable and hose guidance Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually Decoupled handwheels tested in accordance with EN 23125 Two-channel right/left switch tested in accordance with EN 23125 No change wheels necessary Switch with life cycle calculation tested in accordance with EN ISO 13849 With safety device to prevent simultaneous operation of tapping and feed mechanism Bed guides hardened and precision ground Electronically braked motor Electronic feed cut-off of the Z-axis All electronic controls can be reached centrally Complete illumination of the work area External coolant tank with level indicator and oil separator Complete lead and feed spindle cover Electric position stop with quadruple position stop Three-jaw lathe chuck included as standard Quick-change steel holder SWH 7-C 1 steel holder 32 x 130 type D for square chisel 25 mm
Digital position indicator DPA 32-3 TX 5216
Large spindle bore Ø 80 mm TX 6222:
Large spindle bore Ø 105 mm Manufacturer Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
Add to compare list Add to wishlist
51-3383845
Radius / Diameter mode Parameter memory Inch / metric adjustment Multifunction LCD display Adjustable angle measurement Absolute / incremental 8-digit LCD display Coordinate conversion Manufacturer Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
Add to compare list Add to wishlist
51-3889106
Manufacturer
Add to compare list Add to wishlist
51-3889111
Manufacturer
Add to compare list Add to wishlist
51-0338419200
Manufacturer
Add to compare list Add to wishlist
51-0338418700
Manufacturer
Add to compare list Add to wishlist
51-3383977
Manufacturer
Add to compare list Add to wishlist
51-3462175
Hardened and ground Z-axis guideway Guaranteed concentricity of the spindle nose ≤ 0.015 mm Spindle holder Camlock DIN ISO 702-2 No. 8 Two gear stages Spindle bore / bar passage Ø 105 mm Siemens Sinamics frequency inverter / Safety Integrated Lead screw cover Precisely machined slide All guides can be adjusted using wedge strips Right/left rotation on bed slide switchable via switching spindle Two-channel safety electronics Central lubrication in the bed slide Upper slide adjustment range ± 90 Gear wheels smooth-running, hardened, ground and mounted with 2 adjustable precision tapered roller bearings Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings Handwheels with adjustable fine scaling 0.04 / 0.02 mm Safety handwheels with disengagement function in accordance with EN23125 in the X and Z axes Clearly arranged selector lever for switching the feed speeds Closed design of the quick-change feed gearbox Switch with life cycle calculation, tested in accordance with EN ISO 13849 Emergency stop impact switch, motor protection switch, lockable main switch Emergency stop device with foot actuation Tailstock for taper turning ± 10 mm adjustable Tailstock quill and handwheel with adjustable fine scaling 0.025 mm. Quick, easy and tool-free adjustment by means of clamping lever Heavily ribbed prism bed, induction hardened and precision ground from gray cast iron Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN LED machine lamp in the chip guard Energy chain for gentle cable and hose routing Adjustable scale on the thread gauge Manufacturer Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
Add to compare list Add to wishlist
51-3384456
The electronic measuring components of the measuring strips are protected and sealed in the housing Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids Tolerant against vibrations and magnetic interference Without mounting Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
Add to compare list Add to wishlist
51-3384427
The electronic measuring components of the measuring strips are protected and sealed in the housing Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids Tolerant against vibrations and magnetic interference Without mounting Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
Add to compare list Add to wishlist
51-3348340
Solid design made from high-quality Meehanite cast iron High concentricity due to tapered roller bearing, ≤ 0.01 mm measured in the sleeve X- and Z-axis with adjustable 55° dovetail guide Y-axis with adjustable flat guide Coolant device Solid and generously dimensioned cross table, precisely surface-finished with adjustable end stops Drilling/milling head can be tilted ± 45 Automatic quill feed, 3-stage 0.04 - 0.15 mm/rev Precision micro feed Adjustable drilling depth stop with millimeter scale, readable from the front Right/left rotation Infinitely variable speed control Milling spindle with precision bearing Mechanical spindle brake Height-adjustable protective screen with microswitch, against flying chips and parts, for maximum protection of the user Manufacturer Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
Add to compare list Add to wishlist
51-0338412200
Manufacturer
Add to compare list Add to wishlist
51-3344110
Versatile range of applications Robust machine design Heavy, solid design made of high-quality Meehanite cast iron Smooth running due to ground gear wheels running in an oil bath All guides are hardened and can be adjusted using wedge strips Stable flatbed guides in the Y and Z axes Central lubrication Large decoupled handwheels with scale LED machine lamp Coolant device Simple operation of the switching elements Table feed X-, Y- and Z-axis Feed system adjustable in fixed steps by servo motor Massive and generously dimensioned cross table, precisely surface-finished with adjustable wedge bars and adjustable end stops Vertical and horizontal milling position Height-adjustable protective screen with microswitch to prevent flying chips and parts, for maximum user protection Manufacturer Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
Add to compare list Add to wishlist
51-0338412700
Manufacturer
Add to compare list Add to wishlist
51-3384040
Manufacturer
Add to compare list Add to wishlist
51-0338415200
Manufacturer
Add to compare list Add to wishlist
51-0338411700
Manufacturer
Add to compare list Add to wishlist
51-3462210
Hardened and ground Z-axis guideway Guaranteed concentricity of the spindle nose better than 0.015 mm Spindle holder Camlock DIN ISO 702-2 No. 8 Lead screw cover Precisely machined slide All guides can be adjusted using wedge strips Right/left rotation on bed slide switchable via switching spindle Two-channel safety electronics Central lubrication in the bed slide Upper slide adjustment range ± 90 Smooth-running, hardened and ground gear wheels mounted on 2 adjustable precision tapered roller bearings Clearly arranged selector lever for switching the feed speeds Closed design of the high-speed feed gearbox Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings Handwheels decoupled and tested in accordance with EN 23125 Safety handwheels with disengagement function in the X-axis Handwheels with adjustable fine scaling 0.04 / 0.02 mm Safety limit switch with positive opening contacts Switch with life cycle calculation, tested in accordance with EN ISO 13849 Emergency stop switch, motor protection switch, lockable main switch LED machine lamp Energy chain for gentle cable and hose routing Emergency stop device with foot control Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN Electric motor brake with quick emergency stop - quick stop without overrun during normal operation Quick-change steel holder SWH 9-D 1 steel holder 41 x 180 type D for square chisel 32 mm Manufacturer Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de
