Cutting wheel, alumina for metal 125 x 1 x 22.2 mm, 41 A60-T-BF, 57T108 by GRAPHITE is an alumina wheel that is designed for cutting metal. Its dimensions are 125 x 1,0 x 22,2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the disc is 1 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, which corresponds to a speed of 80 m/s. The product complies with the EN 12413 standard.
Cutting wheel, corundum for metal 125 x 2 x 22.2 mm, 41 A46-T-BF, 57T110 by GRAPHITE is an alumina wheel that is designed for cutting metal. Its dimensions are 125 x 2 x 22.2 mm. This model has a flat design and the designation 41 A46-T-BF. The thickness of the disc is 2 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Metal cutting disc VERTO (ref. no. 61H530) with an outer diameter of 115 mm allows to greatly reduce cutting time thanks to reduced thickness. Product is compliant with EN 12413, which ensures high safety at work. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
GRAPHITE electric mixer with 1400 W motor for mixing plaster, mortar or paint. The mixer, thanks to its robust construction and efficient heat dissipation system, is suitable for continuous operation in finishing work on medium-sized construction sites. The mixer has an adjustable spindle speed. In first gear the motor can generate up to 500, and in second gear up to 800 revolutions of spindle per minute. A properly shaped handle of the device allows comfortable and safe work for a long time. Also for safety, the mixer is equipped with a locking device to prevent accidental activation. The mixer comes with two stirrers, one mandrel and two spanners. CE certification ensures compliance with European standards.
The Energy+ 18 V 3-in-1 orbital sander, 04-623 by NEO TOOLS is a multifunctional and handy cordless device that features a speed range of 7,000 to 12,000 min-1 and an oscillation frequency of 14,000 - 24,000. The sander is offered with three work feet: square (111 x 111 mm), rectangular (128 x 78 mm) and delta type (145 x 100 mm). In addition, a dust container and 3 pieces of 120 grit sandpaper are also included. The 3-in-1 orbital sander by NEO TOOLS runs on a 2 Ah battery for 24 minutes. It has overload protection, low voltage protection and an anti-dust switch. It is perfect for polishing, smoothing, sanding and refreshing surfaces.
The SDS Max 1300 W demolition hammer, case 58G877 GRAPHITE is a specialist tool for demolition, demolition work and surface preparation for installation. It is characterised by its high power of 1300 watts. It has a chiselling function and chisel indexing mode. It is equipped with the SDS-max system, characterised by working with hard materials. The hammer has a 4 metre power cable. It is offered in a practical case with a set of accessories: chisel and spindle grease. This is the perfect tool from the GRAPHITE brand for professionals.
Cutting wheel, alumina for metal/INOX 125 x 1.0 x 22.2 mm, 41 A60-T-BF, 57T102 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 125 x 1 x 22.2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the blade is 1.0 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Multifunction machine 250 W, oscillation rate 15000-21000 min?1, case 59G023 by GRAPHITE features a power output of 250 W and an adjustable oscillation rate of 15000-21000/min. The angle of oscillation is 3.2°. The included adapter allows for chip extraction and the six working bits allow the tool to sand, cut and scrape metal, wood and ceramics. The unit includes a sanding foot, ceramic blade, scraper, half-round blade for wood and plastics, wide plunge blade and narrow plunge blade. The kit also offers sandpaper (5 pieces), overlays, a carrying case and a bender with an M5 amul key holder. The tool allows for one-handed work, and its light weight and handy size (300 x 70 mm) contribute to the comfort of the operation.
Versatile GRAPHITE impact drill with 650 W motor is perfect for materials like wood, plastics, metal and ceramics. After switching to impact mode it also allows for drilling in materials like concrete or brick with equal ease. The drill reaches speed up to 3000 rpm during operation and with impact mode on its speed reaches 48 000 impacts per minute. The power tool features function of clockwise and counter-clockwise head rotation. Ergonomic design, small weight and long power cord make operation in hard to reach areas definitely easier. Prolonged operation in hard working conditions is easier thanks to switch lock function for continuous operation at uniform speed. The tool is equipped with flexible and strong power cord in rubber coating, 3 m long, also designed for professional and industrial applications for use indoors and outdoors.
Metal cutting disc VERTO (ref. no. 61H532) with an outer diameter of 125 mm allows to greatly reduce cutting time thanks to reduced thickness. Product is compliant with EN 12413, which ensures high safety at work. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Multifunction machine 500 W, oscillation rate 8000-16000 min?1, case 59G025 by GRAPHITE features a power output of 500 W and an oscillation rate of 8000-16000/min, which can be adjusted. The angle of oscillation is 5°. The included adapter allows for chip extraction and multiple work bits allow the tool to sand, cut and scrape metal, wood and ceramics. The tool includes a Velcro foot, scraper, HCS half-round blade for wood, HM carbide-coated half-round blade for ceramics, HCS 20mm narrow wood blade and HSS 34mm narrow metal blade. The kit also offers P80 sandpaper (5 pieces), a carrying case and an additional handle. The tool allows one-handed work, and its light weight (1.45 kg) and handy size (300 x 70 mm) contribute to the comfort of the operation. The tool has a tool handle with a magnet and features keyless change. It is designed for professionals and DIY enthusiasts.
GRAPHITE's 115 x 1.2 x 22.22 mm 57T124 TCT blade for cutting wood, wood with nails and plastics. The blade has a diameter of 115 mm, a thickness of 1.2 mm and a mounting hole of 22.2 mm. It has a maximum speed of 13,300 rpm and a maximum working speed of 80 m/s. The product is characterised by its compliance with EN 13236 and is designed for use in cutting tools that support this type of disc.
GRAPHITE stone cutting disc allows to greatly reduce cutting time thanks to advanced design and reduced thickness. Product is compliant with EN12413, which ensures high safety at work.
Pin Connector Set, 43 pieces VERTO (ref. 60H285) is an offer for the beginner or intermediate DIY enthusiast, which will allow you to easily make connections in wood or wood-based materials. With this set it is possible to make holes with diameters: 6, 8 and 10 mm. The set includes: 3 pcs wood drill bits, 3 pcs depth stops, 6 pcs markers indicating the place of drilling, 30 pcs dowels of three different diameters (6, 8, 10 mm), hex key.
Cutting wheel, alumina for metal/INOX 125 x 1.6 x 22.2 mm, 41 A46-T-BF, 57T103 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 125 x 1.6 x 22.2 mm. This model has a flat design and the designation 41 A46-T-BF. The thickness of the blade is 1.6 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Cutting wheel, corundum for metal 115 x 2.0 x 22.2 mm, 42 A46-T-BF, convex 57T118 by GRAPHITE is a convex wheel with a diameter of 115 mm, a thickness of 2 mm and a mounting hole of 22.2 mm. It features a maximum speed of 13,300 rpm, with an operating speed of 80 m/s. The product is designed for cutting metal. The GRAPHITE blade meets the requirements of EN 12413.
Cutting disc, corundum for metal/INOX 230 x 2.5 x 22.2 mm, 41 A30-S-BF, 57T104 by GRAPHITE is an alumina disc that is designed for cutting metal and stainless steel (INOX). Its dimensions are 230 x 2.5 x 22.2 mm. This model has a flat design and the designation 41 A30-S-BF. The thickness of the blade is 2.5 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 6,600 rpm, which corresponds to a speed of 80 m/s. The product complies with the EN 12413 standard.
