Metal cutting discs 125 x 1,0 x 22,2 mm, 41 A60-T-BF, 10 pieces, film 55-578 by NEO TOOLS consists of 10 pieces of metal cutting discs with parameters 125 x 1 x 22,2 mm. The product is designed for dry metal cutting. It is characterised by a maximum rotational speed of 12,200 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design and thickness reduction, it allows a significant reduction in working time. It ensures a high level of safety thanks to compliance with the EN12313 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
GRAPHITE electric mixer with a 1600 W motor for mixing plaster, mortar or paint. Thanks to its robust construction and efficient heat dissipation system, the mixer is suitable for continuous operation in finishing work on medium-sized construction sites. The mixer has an adjustable spindle speed. In first gear the motor can generate up to 500, and in second gear up to 800 revolutions of spindle per minute. A properly shaped handle of the device allows comfortable and safe work for a long time. Also for safety, the mixer is equipped with a locking device to prevent accidental activation. The mixer comes with two stirrers, one mandrel and two spanners. Compliance with European standards is ensured by CE certification.
The 125 x 2.0 x 22.2 mm, 42 A46-T-BF, convex 57T119 corundum metal cutting wheel by GRAPHITE is a convex wheel with a diameter of 125 mm, a thickness of 2 mm and a mounting hole of 22.2 mm. It features a maximum speed of 12,200 rpm, with an operating speed of 80 m/s. The product is designed for cutting metal. The GRAPHITE blade meets the requirements of the EN 12413 standard.
Cutting wheel, alumina for metal/INOX 115 x 1.6 x 22.2 mm, 41 A46-T-BF, 57T101 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 115 x 1.6 x 22.2 mm. This model has a flat design and the designation 41 A46-T-BF. The thickness of the blade is 1.6 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 13,300 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
The 180 W delta orbital sander, 140 x 140 x 80 mm foot 59G336 by GRAPHITE is a 180 W tool with a 140 x 140 x 80 mm triangular-shaped foot and compatible 140 x 140 x 97 mm sandpaper. It reaches a speed of 13,000 min-¹ and has an amplitude of oscillation of 0.8 mm. The sander comes with 3 feet, sanding papers (9 pieces) and a spigot. The weight of the machine is 1 kg. This sander model is distinguished by its non-slip, comfortable-to-use handle and dust extraction system. It has a practical 3 m long rubber-coated power cable. It is an indispensable tool for sanding, polishing and effectively removing rust or paint.
The 450 W eccentric sander, 125/150 mm disc, case 59G349 by GRAPHITE is a machine with a 125/150 mm foot and 450 W of power. It reaches a speed of 7,000 to 13,000 rpm and has an amplitude of oscillation of 1 mm. The sander has a built-in dust extraction system to keep the workplace tidy. The infinitely variable speed settings (1-5 + maximum) allow greater control over the machine. The additional handle on the housing is also useful. The non-slip handle and weight of 1.21 kg allow one-handed operation. The switch lock function for continuous operation is designed for more complex tasks. The set includes: 1x working foot 125 mm, 1x working foot 150 mm, 6x sandpaper, hex key, rigid container with dust filter and carrying case. The GRAPHITE eccentric sander will be indispensable in the workshop when sanding and smoothing surfaces.
Metal cutting discs 115 x 1,0 x 22,2 mm, 41 A60-R-BF, INOX, 10 pieces 55-570 by NEO TOOLS consists of 10 pieces of metal/INOX cutting discs with parameters 115 x 1 x 22,2 mm. It is characterised by a maximum rotational speed of 13,200 rpm and a maximum peripheral speed of 80 m/s. Thanks to its advanced design and thickness reduction, it allows a significant reduction in working time. It ensures a high level of safety thanks to compliance with the EN12313 standard. The NEO TOOLS brand disc is recommended for professionals and DIY enthusiasts.
Metal cutting disc 230 x 1,9 x 22,2 mm, 41 A46-S-BF 5 pieces, film 55H579 by GRAPHITE consists of 5 pieces of metal cutting disc 230 x 1,9 x 22,2 mm. The product is designed for cutting metal. Thanks to its advanced design and thickness reduction, it allows you to significantly reduce working time. Ensures a high level of safety thanks to compliance with the EN12313 standard. The GRAPHITE brand blade is recommended for professionals and DIY enthusiasts.
Cutting discs for metal 41 A46 S BF - 230 x 1,9 x 22,2 STAL/INOX, 25 pieces in pack 08-721 by NEO TOOLS is a Polish-made set of 25 cutting discs for metal, offered in a convenient pack. The 41 A46 S BF cutting discs are characterised by a diameter of 230 mm, a thickness of 1.9 mm and a mounting hole of 22.2 mm. Reaching a maximum of 6,600 revolutions per minute. Recommended for steel, including INOX steel. They are ideal as tools for both professional and hobbyist use.
The 240 W oscillating sander, 110 x 100 mm foot 59G322 by GRAPHITE is a 240 W tool with a 110 x 100 mm foot. It reaches a no-load speed of 13000 min-¹ and has an amplitude of oscillation of 0,8 mm. The sander comes with 3 feet (square, rectangular and triangular), sanding papers (9 pieces) and a dust container with filter. The weight of the machine is 1.2 kg. This model of sander is distinguished by its non-slip, comfortable-to-use handle, dust extraction system and the possibility of quickly changing the sanding paper. It has a practical 3 m long rubber-coated power cable. It is an indispensable tool for sanding, polishing and effectively removing rust or paint.
Metal cutting discs 41 A 60 S BF -125 x 1,0 x 22,2 STAL/INOX, 100 pieces in bucket 08-722 by NEO TOOLS is a Polish-made set of 100 metal cutting discs offered in a convenient bucket. The 41 A 60 S BF cutting discs are characterised by a diameter of 125 mm, a thickness of 1 mm and a mounting hole of 22.2 mm. Reaching a maximum of 12,200 revolutions per minute. Recommended for steel, including INOX steel. They are ideal as tools for both professional and hobbyist use.
Cutting disc GRAPHITE (no ref. 55H697) outside diameter 115 mm outside diameteand internal 22.2 mm. The edges of the disc are covered with tungsten carbide, thanks to which it is very good at cutting soft materials, including: wood, wooden boards, chipboards, bricks, plastic, plasterboard.Dedicated to work with angle grinders.
Versatile GRAPHITE impact drill with 850 W motor is perfect for materials like wood, plastics, metal and ceramics. After switching to impact mode it also allows for drilling in materials like concrete or brick with equal ease. The drill reaches speed up to 3000 rpm during operation and with impact mode on its speed reaches 48 000 impacts per minute. The power tool features function of clockwise and counter-clockwise head rotation. Ergonomic design, small weight and long power cord make operation in hard to reach areas definitely easier. Prolonged operation in hard working conditions is easier thanks to switch lock function for continuous operation at uniform speed. The tool is equipped with flexible and strong power cord in rubber coating, 3 m long, also designed for professional and industrial applications for use indoors and outdoors.
Cutting disc, alumina for metal/INOX 125 x 1.0 x 22.2 mm, 41 A60-T-BF, 110 pieces, carton 57T126 by GRAPHITE is an alumina disc that is designed for cutting metal and stainless steel (INOX). The dimensions of the tool are 125 x 1.0 x 22.2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the blade is 1.0 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 12,200 rpm, which corresponds to a speed of 80 m/s. The product complies with the EN 12413 standard and is offered in a packaging of 110 pieces.
Cutting wheel, alumina for metal/INOX 115 x 1.0 x 22.2 mm, 41 A60-T-BF, 57T100 by GRAPHITE is an alumina wheel that is designed for cutting metal and stainless steel (INOX). Its dimensions are 115 x 1.0 x 22.2 mm. This model has a flat design and the designation 41 A60-T-BF. The thickness of the blade is 1.0 mm and the diameter of the mounting hole is 22.2 mm. The maximum speed is 13,300 rpm, corresponding to a speed of 80 m/s. The product complies with the EN 12413 standard.
Demolition hammer, 30 mm hex chuck, 1700 W, case 58G868 by GRAPHITE is a 30 mm hex chuck tool with 1700 W power for demolition and renovation work. Offered in a sturdy carrying case together with accessories - 1x chisel, dust cover, grease reservoir. The hammer has an impact energy of 45 J and a chisel strike rate of 1500 per minute. It has a 4m power cable and has a total weight of 14kg. It is a robust tool with a housing that is resistant to mechanical damage and high temperatures. The demolition hammer with handle from the GRAPHITE brand is recommended for professionals.
Cutting disc for metal GRAPHITE (ref. no. 55H574) with diameters 115 mm allows to advanced design and greatly reduce cutting time thanks to reduced thickness. Product is compliant with EN 12413, which ensures high safety at work.
