Absolutely Low maintenance drive with maximum energy efficiency thanks to directly coupled coaxial screw compressor
EasyTronic IV control as standard prevents motor overload, reduces wear and ensures a longer service life
High cooling effect and Lower noise level thanks to the thermostatically controlled radial fan
Longer service life of the device and less fluctuations in the oil temperature thanks to the thermostatically controlled fan, optimal cooling air flow and generously sized heat exchanger
Less effort for drying and filtering the generated compressed air Integrated aftercooler
Guaranteed compliance with the maintenance intervals by recording the load and run-on times via the operating hours counter
Display of the maintenance requirement via automatic notification
Avoiding damage during commissioning or after changing location through integrated direction of rotation control for the motor
Service-friendly due to optimal accessibility and simple assembly / disassembly of all components to be serviced
Easy transport and assembly due to small external dimensions
Monitoring as standard the engine and compressor speed through SpeedTronic Control control
Fifteen-year guarantee against rusting through on the inside and outside of hot-dip galvanized compressed air tanks
Energy savings with frequency-controlled compressors:
Based on the frequency converter technology, the delivery quantity of the compressor adapts to the actual consumption. The electronic control monitors the engine and compressor speed and keeps the network pressure constant. The user receives advanced cutting-edge technology in the smallest of spaces.
Your advantages:
Active energy saving
Ideal for frequently changing compressed air consumption
The speed-controlled compressor achieves maximum efficiency and keeps the network pressure constant, even when consumption fluctuates greatly.
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
Energy savings through frequency-controlled compressors Reducing energy consumption and protecting our precious energy resources has become a global challenge given its impact on the environment. The A-PLUS 22, 37, 55 and 75 kW range is also available in a speed control version that combines high performance with energy saving solutions. By using a variable speed compressor in a typical installation, you save a significant amount of energy. Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Absorbed oils are reliably bound in hermetically sealed cartridges - no contact with contaminants
Easy adjustment to changing compressed air and condensate requirements
Condensate is actively pressed through the pre-filter and main filter with light blasts of compressed air
Permanent function monitoring
Fail-safe mode in the event of a power failure and loss of compressed air: QWIK-PURE continues to work like conventional gravity separators
QWIK-PURE series
Absorbed oils are reliably bound in hermetically sealed cartridges - no contact with contaminants
Simple, clean and ergonomic cartridge replacement
Simple adjustments to changing compressed air and condensate requirements
Sizing according to service interval or compressor capacity
From QWIK-PURE 15
Condensate is actively pressed through the pre-filter and main filter with light blasts of compressed air
Permanent function monitoring
Integrated FRC control unit: reliable display of the remaining capacity of the cartridges and automatic monitoring of when condensate needs to be pushed through with light blasts of compressed air
Integrated monitoring optimally utilizes the cartridges
Remote monitoring possible thanks to network capability
No overflowing of the system thanks to active operating principle with automatic drainage
Fail-safe mode in the event of power failure and loss of compressed air: independent initiation of measures and triggering of alarms in the event of problems. For safe operation, QWIK-PURE then continues to work like conventional gravity separators.
Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
Two-cylinder high-performance unit made of grey cast iron with low speed guarantee particularly quiet and low-vibration operation -> less wear - longer service life
Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
Equipped with glycerine pressure gauge, operating hours counter and error display via LED lights
Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
Suitable for installation even in noise-sensitive areas and the direct working environment
Two-cylinder high-performance unit made of grey cast iron with low speed warrantys particularly quiet and low-vibration operation: less wear and longer service life
Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
Inter- and aftercooler as well as an additional air duct between motor and compressor reduce condensate formation
High-quality Condor pressure switch
Equipped with glycerine pressure gauge, hour meter and fault indication via LED lights
Quality electric motor with motor protection switch and start-up relief
Integrated phase monitoring
Facility for easy tensioning of the V-belt
Service-friendly design
Ready for connection with all fittings and safety devices
Models with compressed air tank: Galvanised air reservoir inside and out with 15-year warranty against rusting through
Star-delta gearstick as standard
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirements via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Wired remote control for AIRCRAFT energy saver Art. 2150001 and 2150003
Including 5 m cable
Note: The electrical connection must be made by a licensed company or by purchasing a new energy saver by factory assembly. Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
Two-cylinder high-performance unit made of grey cast iron with low speed guarantee particularly quiet and low-vibration operation -> less wear - longer service life
Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
Equipped with glycerine pressure gauge, operating hours counter and error display via LED lights
Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
Suitable for installation even in noise-sensitive areas and the direct working environment
Two-cylinder high-performance unit made of grey cast iron with low speed warrantys particularly quiet and low-vibration operation: less wear and longer service life
Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
Inter- and aftercooler as well as an additional air duct between motor and compressor reduce condensate formation
High-quality Condor pressure switch
Equipped with glycerine pressure gauge, hour meter and fault indication via LED lights
Quality electric motor with motor protection switch and start-up relief
Integrated phase monitoring
Facility for easy tensioning of the V-belt
Service-friendly design
Ready for connection with all fittings and safety devices
Models with compressed air tank: Galvanised air reservoir inside and out with 15-year warranty against rusting through
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Star-delta switching as standard
Easy to service: simple removal and installation of all components requiring maintenance
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
The two-stage compression 2-cylinder high-performance unit enables a very low speed, resulting in a particularly quiet and low-vibration run
Large fan ensures optimal cooling
Intercooler and aftercooler ensure a low container inlet temperature and thus reduce condensation
High quality electric motor with high torque
Electric motor equipped with motor protection switch
Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
Flexible armored hose line with heat protection prevents vibration breakage
High-quality CONDOR pressure switch as standard
From 7.5 kW as standard with star-delta switch with operating hours counter
Ready for connection with all fittings
Additional equipment K-version:
Refrigerated dryer with integrated automatic steam trap for dry compressed air, longer service life of compressed air tools and avoidance of disturbances in pneumatic controls
Fine filter for separating condensate and solid impurities with particles up to 1 μ in front of the refrigeration dryer
Equipment
Automatic steam trap on the compressed air tank
No unnecessary pressure loss
Condensate conditioner for oil-water separation
Important notes on condensate treatment can also be found in the section on compressed air preparation.
Fine filter for separating condensate and solid impurities with particles up to 1 μm
Compressed air quality according to ISO 8573-1
As a pre-filter in front of the refrigeration dryer
Refrigerated dryer with integrated automatic steam trap
Pressure dew point at 5 °C, ambient temperature 25 °C, atmospheric dew point at -22 °C
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
