Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line.
Your advantages through better quality compressed air:
Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
Better working and production conditions
Optimum protection of connected tools and machines
Improved product quality through reduction of rejects
Protection of the compressed air system against contamination
Increase of productivity by reduction of instant maintenance
for the separation of solid contaminants up to 0.1μm
Residual oil aerosol content up to 0.1 mg / m³ at 20 ° C and 1 bar
Operating temperature 1.5 to 65 ° C
absolute compressed air quality according to ISO 8573-1
for safe separation of condensate and particles
complete with filter element and float valve
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
Rotation direction control for the motor, prevents damage during start-up or after a change of location
High cooling effect and low noise level due to thermostatically controlled radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Easy to service: simple removal and installation of all components requiring maintenance
Latest generation IE4 permanent magnet motor for max. energy efficiency
Larger speed/load range
Larger delivery volume supply range
Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
Very quiet operation - only 64 dB
Energy saving through frequency control
Ideal for frequently changing compressed air consumption
Compressor delivery rate adjusts to actual consumption
Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
Advanced and efficient cutting-edge technology in the smallest possible space
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
For continuous air demand and discontinuation operation
Electronic control for reliability and efficiency
Increased flexibility thanks to two compressed air tanks
High-quality and expandable equipment
Smooth and quiet
Just as mobile and compact as piston compressors, but with the great advantage of being able to generate compressed air continuously without any cooling pauses
Can also be used in intermittent operation due to oil temperature control
Electronic temperature control for optimum oil temperature
Optimum oil viscosity due to constant temperature, therefore also suitable for intermittent operation with frequent load changes
Temperature control of the oil prevents condensation and minimizes wear
Better energy efficiency compared to a piston compressor with the same delivery capacity
Additional oil heat exchanger for cooling
K-Tronic electronic control system for reliability and efficiency
Adjustment of the cut-in and cut-out pressure
Direction of rotation control
Monitoring and control of the oil temperature
Maintenance interval display
Optimized oil separation system
Effective oil pre-separation by gravity, as the oil sump is located at the lowest point
Oil separator cartridge and oil filter cartridge easily accessible for maintenance
Integrated design of the compressor unit
Convenience and high operational reliability thanks to integration and short connections of all key components on the compressor unit
Maintenance-free direct drive
Freewheel valve for load-free operation after reaching the set pressure
Lightweight, compact and quiet
Can be used in mobile applications or where space is limited
Highly efficient and low-noise fan
Smooth-running compressor with low noise level
Increased flexibility thanks to two compressed air tanks
Two 100 liter compressed air tanks ready mounted on a safety pallet
Doubling of the air supply by switching on the second compressed air tank - an increased air requirement is covered at short notice
Halving the tank volume by disconnecting the second compressed air tank - allows pressure to be built up quickly, e.g. for chiseling or sandblasting work
High-quality equipment
Hot-dip galvanized compressed air tanks inside and out with a 15-year guarantee against rusting through
Splash water protection in accordance with IP 54
Flexible armored hose lines with heat protection prevent vibration fractures
With phase inverter on the plug as standard
Ready for connection with all fittings
Additional equipment for compressed air preparation and discharge available
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Start-stop operation via pressure switch, thereby saving energy compared to idling control
Minimal and easy maintenance
Ready for connection with all fittings
Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
Easily transportable and deployable thanks to the safety pallet.
KK version as standard with automatic steam trap for the reliable and economical discharge of the condensate without unnecessary loss of compressed air
K and KK version with refrigeration dryer as standard with pressure dew point at 3 °C, ambient temperature 25 °C
Increased flexibility
Enabling the second compressed air vessel doubles the pressure vessel volume, thus creating a greater compressed air reserve. Helps to cover short-term peaks in compressed air requirements
For, e.g., chisel, hammer or sandblasting work, the second vessel can be isolated from the compressed air supply. This halves the vessel volume helping to build up the pressure more quickly.
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
Energy savings through frequency-controlled compressors Reducing energy consumption and protecting our precious energy resources has become a global challenge given its impact on the environment. The A-PLUS 22, 37, 55 and 75 kW range is also available in a speed control version that combines high performance with energy saving solutions. By using a variable speed compressor in a typical installation, you save a significant amount of energy. Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line
Your advantages through better quality compressed air:
Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
Better working and production conditions
Optimum protection of connected tools and machines
Improved product quality through reduction of rejects
Protection of the compressed air system against contamination
Increase of productivity by reduction of instant maintenance
for separating solid contaminants up to 0.01μm
Residual oil aerosol content up to 0.01 mg / m³ at 20 ° C and 1 bar
Operating temperature 1.5 to 65 ° C
absolute compressed air quality according to ISO 8573-1
for safe separation of condensate and particles
complete with filter element and float valve
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Service-friendly: easy removal and installation of all components requiring maintenance
Energy saving through frequency control
Ideal for frequently changing compressed air consumption
Compressor delivery rate adjusts to actual consumption
Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Absolutely Low maintenance drive with maximum energy efficiency thanks to directly coupled coaxial screw compressor
EasyTronic IV control as standard prevents motor overload, reduces wear and ensures a longer service life
High cooling effect and Lower noise level thanks to the thermostatically controlled radial fan
Longer service life of the device and less fluctuations in the oil temperature thanks to the thermostatically controlled fan, optimal cooling air flow and generously sized heat exchanger
Less effort for drying and filtering the generated compressed air Integrated aftercooler
warrantyd compliance with the maintenance intervals by recording the load and run-on times via the operating hours counter
Display of the maintenance requirement via automatic notification
Avoiding damage during commissioning or after changing location through integrated direction of rotation control for the motor
Service-friendly due to optimal accessibility and simple assembly / disassembly of all components to be serviced
Easy transport and assembly due to small external dimensions
Monitoring as standard the engine and compressor speed through SpeedTronic Control control
Fifteen-year warranty against rusting through on the inside and outside of hot-dip galvanized compressed air tanks
Energy savings with frequency-controlled compressors:
Based on the frequency converter technology, the delivery quantity of the compressor adapts to the actual consumption. The electronic control monitors the engine and compressor speed and keeps the network pressure constant. The user receives advanced cutting-edge technology in the smallest of spaces.
Your advantages:
Active energy saving
Ideal for frequently changing compressed air consumption
The speed-controlled compressor achieves maximum efficiency and keeps the network pressure constant, even when consumption fluctuates greatly.
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
Standard with star-delta connection
Energy savings through frequency-controlled compressors Reducing energy consumption and protecting our precious energy resources has become a global challenge given its impact on the environment. The A-PLUS 22, 37, 55 and 75 kW range is also available in a speed control version that combines high performance with energy saving solutions. By using a variable speed compressor in a typical installation, you save a significant amount of energy. Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Star-delta switching as standard
Easy to service: simple removal and installation of all components requiring maintenance
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
