Chip extractor

• Võimsus: 1500 W
• Pinge: 230 V/50Hz
• Kiirus: 2950 min-1
• Vooliku läbimõõt: 3x100 mm
• Jõudlus: 3000 m³/h
• Tiiviku läbimõõt: 300 mm
• Helitugevus: <85 dB(A)
• Kaal: 45 kg

Stabiilne lehtmetall konstruktsioon ja püsiv jõudlus. Vastupidav metalltiivik. Suur 300 L kogur. 4 ratast transpordi lihtsustamiseks.

• Võimsus: 1500 W
• Pinge: 400 V/50Hz
• Kiirus: 2950 min-1
• Vooliku läbimõõt: 3x100 mm
• Jõudlus: 3000 m³/h
• Tiiviku läbimõõt: 300 mm
• Helitugevus: <85 dB(A)
• Kaal: 45 kg

Kompaktne, kuid suure jõudlusega. Metallist tiivik.

• Võimsus: 1050 W
• Pinge: 230 V/50 Hz
• Vooliku läbimõõt: 100 mm
• Jõudlus: 850 m³/h
• Koguri maht: 40 L
• Tiiviku läbimõõt: 230 mm
• Helitugevus: 78 dB(A)
• Helirõhk: 76,6 dB(A)
• Kaal: 23 kg.

Mobiilne seade laastuvaba töökoha tarbeks.
Laastude ja saepuru imemiseks freespinkidel, höövelpinkidel ja saagpinkidel.
Tagab puidutöötluspinkide suurema tootlikkuse ja säästab töötajate tervist.
Kühvli kujuga ventilaatoriratas tagab suure imamisvõimsuse.
Kergesti liigutatav tänu standardvarustusse kuuluva liikuvale alusele.
Kottide lihtne kinnitamine pingutusrihmadega.

• Pinge: 230 V
• Võimsus: 1,5 kW
• Tootlikus: 2553 m³/h
• Maks alarõhk: 1300 Pa
• Väljatõmbe ava Ø: 125 mm
• Sisendava Ø jagajal: 2x100 mm
• Mõõdud: 1000 x 750 x 2000 mm
• Kaal: 37 kg

Mobiilne seade laastuvaba töökoha tarbeks. Laastude ja saepuru imemiseks freespinkidel, höövelpinkidel ja saagpinkidel. Tagab puidutöötluspinkide suurema tootlikkuse ja säästab töötajate tervist. Kühvli kujuga ventilaatoriratas tagab suure imamisvõimsuse. Kergesti liigutatav tänu standardvarustusse kuuluvale liikuvale alusele. Kottide lihtne kinnitamine pingutusrihmadega.

• Pinge: 400 V
• Võimsus: 1,5 kW
• Tootlikus: 2553 m³/h
• Maks alarõhk: 1950 Pa
• Väljatõmbe ava Ø: 125 mm
• Sisendava Ø jagajal: 2x100 mm
• Mõõdud: 1000 x 750 x 2000 mm
• Kaal: 37 kg

Seade laastuvaba töökoha tarbeks. Laastude ja saepuru imemiseks freespinkidel, höövelpinkidel ja saagpinkidel. Tagab puidutöötluspinkide suurema tootlikkuse ja säästab töötajate tervist. Kühvli kujuga ventilaatoriratas tagab suure imamisvõimsuse. Kergesti liigutatav tänu standardvarustusse kuuluvale liikuvale alusele. Kottide lihtne kinnitamine pingutusrihmadega.

• Pinge: 230 V
• Võimsus: 2,2 kW
• Tootlikus: 3910 m³/h
• Maks alarõhk: 1950 Pa
• Väljatõmbe ava Ø: 150 mm
• Sisendava Ø jagajal: 3x100 mm
• Mõõdud: 1450 x 800 x 2000 mm
• Kaal: 48 kg

Mobiilne seade laastuvaba töökoha tarbeks. Laastude ja saepuru imemiseks freespinkidel, höövelpinkidel ja saagpinkidel. Tagab puidutöötluspinkide suurema tootlikkuse ja säästab töötajate tervist. Kühvli kujuga ventilaatoriratas tagab suure imamisvõimsuse. Kergesti liigutatav tänu standardvarustusse kuuluvale liikuvale alusele. Kottide lihtne kinnitamine pingutusrihmadega.

• Pinge: 400 V
• Võimsus: 2,2 kW
• Tootlikus: 3910 m³/h
• Maks alarõhk: 1900 Pa
• Väljatõmbe ava Ø: 150 mm
• Sisendava Ø jagajal: 3x100 mm
• Mõõdud: 1450 x 800 x 2000 mm
• Kaal: 48 kg

Mobiilne seade laastuvaba töökoha tarbeks. Laastude ja saepuru imemiseks freespinkidel, höövelpinkidel ja saagpinkidel. Tagab puidutöötluspinkide suurema tootlikkuse ja säästab töötajate tervist. Kühvli kujuga ventilaatoriratas tagab suure imamisvõimsuse. Kergesti liigutatav tänu standardvarustusse kuuluvale liikuvale alusele. Kottide lihtne kinnitamine pingutusrihmadega.

• Pinge: 230 V
• Võimsus: 0,55 kW
• Tootlikus: 1200 m³/h
• Maks alarõhk: 1100 Pa
• Väljatõmbe ava Ø: 100 mm
• Sisendava Ø jagajal: 100 mm
• Mõõdud: 900 x 500 x 1550 mm
• Kaal: 19 kg

• High-performance bag filter with special surface coating
• Filter of category M
• Dust tested to H3, residual dust content < 0.1 mg / m³
• Large dimensioned filling container for easy and quick replacement of chip bags extendable
• Level controlled by a sight glass
• Approved as industrial vacuum cleaner in conjunction with a floor cleaning set
• Reduced power consumption at full suction power and economical consumption thanks to optimized air flow and high-performance fan with backward-curved impeller arranged on the clean air side
• With aerodynamically sophisticated housing
• Optimum pre-separation by a cyclone already in the intake area
• Filters with large folds, therefore easy to clean, so that highest filter life is achieved and only very low maintenance and operating costs
• Filter cleaning via a hand lever
• M version with automatic filter cleaning
• Due to its low weight, swivel castors and large handles, it can be used quickly and efficiently at various workstations

• Dust tested to H3, residual dust content less than 0.1 mg / m³
• Suitable for vacuuming and separating dry wood and plastic chips
• High extraction capacity with a small footprint
• Maximum performance in this class
• Very quiet
• All models with a collision protection

• Designed for commercial use
• For all woodworking machines with corresponding extraction nozzle diameter

• Robust and compact housing made of galvanized sheet steel
• Extraction nozzle easily convertible from left to right, thus flexible use
• Large inspection openings
• Large-sized, mobile chip container with clamp and chip collecting bag
• Dust remover at delivery already completely assembled, thus quick to use
• All models mobile
• For model RLA 210: Optimum chip distribution in the chip containers due to large filter surface

• Ultra compact with maximum filter surface
• Filter material made of polyester fleece, aluminised, therefore with long service life
• Standard anti-static filter tested and approved according to M-BIA category
• The fan is connected downstream of the filter
• Maximum safety, thanks to antistatic filter elements

• For use in workshops with a simultaneity factor of 1-2 machines, from RLA 2501 2-3 machines (depending on the required volume flow) or as a decentralized extraction system to supplement an already existing stationary system.
• For universal use with various materials - also suitable for dry aluminum chips!
• 100% air recirculation without additional costs and constructional effort
• Delivery ready for connection
• High suction capacity
• Low costs for pipe components and installation, especially when replacing old and no longer approved systems
• Integrated pre-separation chamber to reduce the load and protect the filters
• Compact dimensions, allowing the units to be installed in previously unused areas
• Suction side can be ordered with orientation to the left or right, thus also possible use of workshop niches
• Control system expandable by plug-in technology
• From model RLA 2501 P
• :Optimal filter cleaning after added time after switch-offwith

• Ideal for e.g. positioning under the machine table thanks to its flat design
• Steel paddle fan wheel ensures constantly high extraction performance
• Supplied with chassis as factory standard
• Easy fastening of bags with tensioning straps

• Ideal for e.g. positioning under the machine table thanks to its flat design
• For extracting milling, planing and sawing chips
• For a clean and healthy workplace in the workshop
• Steel paddle fan wheel ensures constantly high extraction performance
• Supplied with chassis as factory standard
• Easy fastening of bags with tensioning straps

• High-performance bag filter with special surface coating
• Filter of category M
• Dust tested to H3, residual dust content < 0.1 mg / m³
• Large dimensioned filling container for easy and quick replacement of chip bags extendable
• Level controlled by a sight glass
• Approved as industrial vacuum cleaner in conjunction with a floor cleaning set
• Reduced power consumption at full suction power and economical consumption thanks to optimized air flow and high-performance fan with backward-curved impeller arranged on the clean air side
• With aerodynamically sophisticated housing
• Optimum pre-separation by a cyclone already in the intake area
• Filters with large folds, therefore easy to clean, so that highest filter life is achieved and only very low maintenance and operating costs
• Filter cleaning via a hand lever
• M version with automatic filter cleaning
• Due to its low weight, swivel castors and large handles, it can be used quickly and efficiently at various workstations

• For milling, planing and sawdust
• High-quality, stable chassis for easy manoeuvring
• Fine filter bag double woven

• For milling, planing and sawdust (not suitable for dust)
• 180° rotatable suction unit enables suction routing from below or above
• Stable fan wheel made of metal
• Standard with high-quality chassis for better stability and easy manoeuvring
• Quick-release fasteners for filter and chip sack
• Fine filter bag double woven

• For milling, planing and sawdust (no dust)
• Significantly reduced dust content by BIA-tested filter material with a high degree of separation
• Housing parts and impellers made of high-strength special plastic
• Quick-release fasteners for filters and chip bags for trouble-free maintenance
• Robust, high-quality execution
• Easy to move through castors
• Low energy consumption
• Extractors comply with dust class L

• Fine dust filter cartridge with specially treated polyester fleece
• Retains finest particles
• High airflow, large filter surface
• Higher tear resistance and therefore longer service life