AIRCRAFT suruõhuseadmed ja töökojatehnika Hammerjackis
Hammerjack on AIRCRAFT toodete ametlik maaletooja. AIRCRAFT on Saksamaa kvaliteetbränd, mis kuulub Stürmer Maschineni tootevalikusse ning on spetsialiseerunud professionaalsetele suruõhuseadmetele, kompressoritele ja töökojatehnikale. AIRCRAFTi tooteid usaldavad tööstusettevõtted, autoremonditöökojad, tootmisettevõtted ja professionaalsed meistrid üle Euroopa.
AIRCRAFTi valikusse kuuluvad kolbkompressorid, kruvikompressorid, suruõhumahutid, õhutöötlusseadmed, pneumotööriistad, voolikurullid, filtrid, kuivatusseadmed, rõhuregulaatorid ning muud suruõhusüsteemide komponendid. Kõik seadmed on loodud tagama kõrge töökindluse, energiatõhususe ja pika kasutusea.
Professionaalsed suruõhulahendused
Olgu tegemist väikese töökoja, autoremondiettevõtte või suure tootmisettevõttega – AIRCRAFT pakub töökindlaid suruõhusüsteeme ja seadmeid, mis aitavad tagada efektiivse ning katkematu töö igapäevaselt.
Miks valida AIRCRAFT?
AIRCRAFT toodete ametlik maaletooja.
Saksa kvaliteediga kompressorid ja suruõhuseadmed.
Terviklikud suruõhusüsteemide lahendused.
Kõrge töökindlus ja energiatõhusus.
Lahendused tööstusele, autotöökodadele ja tootmisettevõtetele.
Saksa kvaliteet professionaalidele
AIRCRAFT ühendab kaasaegse tehnoloogia, kvaliteetsed komponendid ja vastupidava konstruktsiooni, pakkudes professionaalseid suruõhulahendusi ka kõige nõudlikumates töötingimustes.
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Service-friendly: easy removal and installation of all components requiring maintenance
Energy saving through frequency control
Ideal for frequently changing compressed air consumption
Compressor delivery rate adjusts to actual consumption
Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
A-MICRO 4.0-10 on kompaktne ja vaikne kruvikompressor pidevaks kasutamiseks. Võimas 4 kW mootor, maksimaalne töörõhk 10 bar, tootlikkus kuni 500 l/min ning helikindel korpus tagavad usaldusväärse suruõhuvarustuse.
AIRSTAR 853/500/10H on professionaalne statsionaarne rihmülekandega kolbkompressor, mis on loodud intensiivseks kasutamiseks töökodades, hooldusettevõtetes ja tootmisüksustes. Kaheastmeline 2-silindriline malmist kompressoriüksus töötab madalatel pööretel, tagades suure tootlikkuse, väiksema kulumise ning pika kasutusea.
Kompressor on varustatud tõhusa vahe- ja järeljahutussüsteemiga, mis vähendab suruõhu temperatuuri ja niiskusesisaldust. Kvaliteetne CONDOR rõhulüliti, mootorikaitselüliti ning vastupidav pulbervärvitud surveanum muudavad seadme usaldusväärseks igapäevaseks professionaalseks kasutamiseks.
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Fifteen-year warranty against rusting through on the inside and outside of hot-dip galvanized compressed air tanks
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Drying by partial vapor pressure compensation of water vapor by diffusion in combination with a highly selective membrane
No change in the compressed air composition - can be used for breathing air treatment
Efficient
Reaches the required pressure dew point with low energy consumption
Very fast availability of dried compressed air
Filtration and drying compact in one device
Robust
Housing made of seawater-resistant aluminum
Low-maintenance, currentless technology
System-compatible
Modularly combinable with CLEARPOINT Filter program
Can be used anywhere along the compressed air treatment chain - can also be integrated into system technology
The ultimate membrane dryer technology with integrated nanofilter
Filtration and drying in one housing (simple filter element change)
Low purge air requirement (Twist 60 technology)
Availability of dried compressed air immediately without running-in phase
Safe drying due to the high partial vapor pressure gradient
No change in the compressed air temperature and composition
Proven 100,000 times
Maintenance-free (except filter element change)
For diverse applications, including for breathing air treatment
Also ideal for use directly behind the compressor / aftercooler
Optionally also for higher loads (assembly potting, 16 bar, 70°C)
For a reliable function of the DRYPOINT M membrane dryer must meet the following requirements:
The incoming compressed air must not contain any liquid condensate
Particles larger than 1 μm must be separated before the membrane dryer
The oil content of the compressed air must not exceed 0.01 mg/m³.
DRYPOINT M membrane dryers have been an alternative to existing ones for years Compressed air drying process proven.
Advantages DRYPOINT M PLUS
Proven process of highest reliability and functional safety
Immediate availability of dry compressed air, even when working discontinuously
Low purge air requirement, compressed air drying can be adjusted to the application
Compact and robust, small space requirement due to low overall height
Compressed air inlet and outlet on one level (filter version), easy to combine with CLEARPOINT filters
Maintenance and wear-free as there are no moving parts
No reduction in the oxygen content, therefore also suitable for breathing air treatment
No electrical connection, also suitable for Ex areas
Long service life in case of use of CLEARPOINT filters
Environmentally friendly, does not require CFCs / CFC-containing refrigerants or adsorbents
Complete solution: filtration and dryer in a compact form, integration of drain pipe
Filtration at the point in the treatment chain where the highest efficiency is achieved
Easy maintenance / replacement of filter element as with a regular filter
Filter element: N (nanofilter)
The CLEARPOINT filter element type N is used to separate solid particles down to 0.01 micron, water and oil aerosols . The element has a multi-stage structure for efficient and long-lasting filtering. In the first stage, coarse particles are retained by a pre-filter layer. In the second stage, finer particles are absorbed by a depth filter bed made of high-performance borosilicate fiber fabric. Due to the very large cavity volume of the filter medium (96%), a very high dirt holding capacity is achieved. The filter medium is specially impregnated in order to avoid cross-sectional swelling of the individual fibers.
Trap: Float trap
The basic version includes a float drain.
Size 10 - 40
This size is for the demand-oriented compressed air drying of medium volume flows configured. Different levels of drying of the compressed air are achieved through different purge air settings.
AIRPROFI DUO 703/2x100/10 on professionaalne statsionaarne kolbkompressor kahe 100-liitrise suruõhumahutiga. Imemisvõimsus 650 l/min, tootlikkus 520 l/min ja maksimaalne töörõhk 10 bar tagavad stabiilse suruõhuvarustuse töökodadesse ning tööstuslikuks kasutuseks. Kahe mahuti süsteem pakub suuremat õhuvaru ja paindlikumat kasutamist suure õhutarbega töödel.
Tehnilised andmed:
Toote tüüp: statsionaarne kolbkompressor
Mahutite maht: 2 × 100 l (kokku 200 l)
Imemisvõimsus: 650 l/min
Efektiivne tootlikkus: 520 l/min (6 bar töörõhu juures)
Easy installation and accessibility of all maintenance positions
Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.
EasyTRONIC Micro II electronic control for reliability and efficiency
Prevents motor overload, reduces wear and makes for a longer service life
Monitoring of operating hours, temperature and motor overload
Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation
Optimized cooling system
Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature
User-friendly in all details
Low noise, suitable for deployment in any work environment
Small footprint facilitates transport and deployment
Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
All air and oil lines are made of heat-resistant rubber
Equipped with a star delta circuitry as factory standard
Ready to connect with all fittings and safety equipment
K models with Integrated refrigeration dryer
More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
Fully integrated into the housing
Ready for use without installation overhead
Equipped with control panel and time-controlled condensate drain
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Service-friendly: easy removal and installation of all components requiring maintenance
Energy saving through frequency control
Ideal for frequently changing compressed air consumption
Compressor delivery rate adjusts to actual consumption
Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirements via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
Aftercooler with cooling fins for low vessel inlet temperature and less moisture in the compressed air
Sturdy metal belt guard
"Made in Germany": vessel pressure gauge; filter pressure regulator with pressure gauge for regulated compressed air cleaned of condensate, dirt and oil
Ten-year warranty against rust-through on powder-coated compressed air reservoir
Including high-quality composite safety coupling and high-quality CONDOR pressure switch
Two-cylinder high-performance units made of gray cast iron for a long service life.
Large fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressor
Quality electric motor with high starting torque
Electric motor equipped with motor protection switch
Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
Sturdy metal belt guard
Start-up capacitor and start-up relief valve ensure easy start-up on 230 volt models
Container pressure gauge "Made in Germany
Filter pressure regulator with pressure gauge "Made in Germany" for regulated compressed air cleaned of condensate, dirt and oil
Ten-year warranty against rust-through on powder-coated compressed air reservoir
Includes high quality composite safety coupling and high quality CONDOR pressure switch
Large ergonomic handle
Stable steering chassis with parking brake in combination with large, puncture-proof PU wheels
Made in Europe
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
