AIRCRAFT

AIRCRAFT ASD 240 suruõhu külmkuivati kuivatab kuni 4000 l/min (240 m³/h) suruõhku ning tagab töökindla niiskuse eemaldamise kuni 16-baristes suruõhusüsteemides. Patenteeritud glükoolitehnoloogia aitab vähendada energiakulusid ja tagab kuiva suruõhu ka muutuva koormuse korral.

Tehnilised andmed:

• Mudel: ASD 240
• Tootjakood: 2041835
• Tüüp: suruõhu külmkuivati
• Õhuvooluhulk: 4000 l/min
• Õhuvool: 240 m³/h
• Maksimaalne töörõhk: 16 bar
• Õhuühendus: 1"
• Elektritarve: 0,64 kW
• Maksimaalne siseneva suruõhu temperatuur: 60 °C
• Maksimaalne ümbritseva keskkonna temperatuur: 50 °C
• Mõõtmed (P × L × K): 420 × 567 × 771 mm
• Kaal: 70 kg

• Absorbed oils are reliably bound in hermetically sealed cartridges - no contact with contaminants
• Easy adjustment to changing compressed air and condensate requirements

• Absorbed oils are reliably bound in hermetically sealed cartridges - no contact with contaminants
• Simple, clean and ergonomic cartridge replacement
• Simple adjustments to changing compressed air and condensate requirements
• Sizing according to service interval or compressor capacity

• Condensate is actively pressed through the pre-filter and main filter with light blasts of compressed air
• Permanent function monitoring
• Integrated FRC control unit: reliable display of the remaining capacity of the cartridges and automatic monitoring of when condensate needs to be pushed through with light blasts of compressed air
• Integrated monitoring optimally utilizes the cartridges
• Remote monitoring possible thanks to network capability
• No overflowing of the system thanks to active operating principle with automatic drainage
• Fail-safe mode in the event of power failure and loss of compressed air: independent initiation of measures and triggering of alarms in the event of problems. For safe operation, QWIK-PURE then continues to work like conventional gravity separators.

A-MICRO SE 4.0-08 on kompaktne ja vaikne kruvikompressor pidevaks kasutamiseks. Tootlikkus kuni 580 l/min, töörõhk 8 bar, 4 kW mootor ning helikindel korpus tagavad töökindla ja energiasäästliku suruõhuvarustuse.

Tehnilised andmed:

• Kompressori tüüp: kruvikompressor
• Paigaldusviis: põrandamudel
• Ajam: rihmülekanne
• Juhtsüsteem: ETM II
• Mootori võimsus: 4 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Maksimaalne töörõhk: 8 bar
• Efektiivne tootlikkus: 580 l/min
• Õhuühendus: 1/2"
• Õli maht: 2,2 l
• Määrdesüsteem: õliga määritud
• Helirõhutase: 60 dB(A)
• Pikkus: 580 mm
• Laius: 480 mm
• Kõrgus: 760 mm
• Netokaal: 93 kg
• Brutokaal: 93 kg
• Mootori kaitse: termiline mootorikaitse
• Õlitemperatuuri jälgimine: kuni 110 °C
• Töötundide loendur: jah
• Mootori pöörlemissuuna kontroll: jah
• Käivitusrežiim: täht-kolmnurk käivitus

Komplekti sisu:

• Kruvikompressor A-MICRO SE 4.0-08
• ETM II juhtseade
• Integreeritud jahutussüsteem
• Helikindel korpus
• Kasutus- ja hooldusjuhend

ASD 180 energiasäästlik suruõhu külmkuivati patenteeritud 3-ahelalise soojusvaheti ja glükooljahutusega. Õhuvooluhulk kuni 3000 l/min, maksimaalne töörõhk 16 bar ning elektrooniline kondensaadieraldaja tagavad kuiva ja kvaliteetse suruõhu.

Tehnilised andmed:

• Tüüp: suruõhu külmkuivati
• Õhuvooluhulk: 3000 l/min
• Õhuvooluhulk: 180 m³/h
• Maksimaalne töörõhk: 16 bar
• Õhuühendus: 1"
• Võimsustarve: 0,65 kW
• Maksimaalne sissetuleva suruõhu temperatuur: 60 °C
• Maksimaalne ümbritsev temperatuur: 50 °C
• Patenteeritud 3-ahelaline soojusvaheti
• Glükooljahutussüsteem energiasalvestusega
• Integreeritud elektrooniline tasemereguleeritav kondensaadieraldaja
• Kondensaadi eemaldamine ilma rõhukadudeta
• Muudetava kiirusega jahutusventilaator
• Mõõdud (P × L × K): 420 × 567 × 771 mm
• Netokaal: 60 kg

Komplekti sisu:

• Suruõhu külmkuivati Aircraft ASD 180
• Integreeritud elektrooniline kondensaadieraldaja
• Sisseehitatud glükooljahutussüsteem
• Kasutusjuhend

• For connecting compressors to compressed air tanks or pipe systems with detachable double nipple
• One connection each with internal and external thread

• EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
• With star-delta switch
• High cooling effect and lower noise level due to thermostatically controlled radial fan
• Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
• Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
• Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
• Easy maintenance due to easily accessible elements
• Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
• Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
• Small external dimensions, thus easy transport and installation

• Maximum, robust equipment and best quality at a reasonable price
• Fully automatic on-off operation
• With all safety devices
• Completely ready for connection

Quality electric motor

• Quality electric motor with high starting torque is equipped with a motor protection switch
• Starting capacitor and starting relief valve ensure easy starting
• Phase inverter as standard for easy manual reversal of the direction of rotation

Compressed air compression via high-performance HOS unit

• The start-up relief valve ensures easy and pressureless start-up
• The two-cylinder high-performance unit made of gray cast iron and the low speed warranty particularly quiet and low-vibration running and a long service life
• This ensures an even longer service life due to even less wear and tear
• High-quality compressor with optimum lubrication for a long service life and high reliability
• Equipped with high quality intake filter
• The aftercooler with large cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, which protects the air tools
• Additional intercooler to the aftercooler
• Corrosion-free valve plates for improved heat dissipation and compressor longevity
• The large fan impeller and a cooling air baffle on the cylinder ensure optimum cooling of the compressor
• A sturdy metal belt guard ensures optimum protection of the components and a high level of user safety
• Compressed air supply to the boiler via flexible armored hose line with heat protection prevents vibration breakage

High quality drive belt

• Powerful and economical drive
• The toothed drive belt facilitates start-up, improves running smoothness and power transmission and reduces power consumption by up to 30%.
• Sturdy metal belt guard

Comfort safety coupling - The advantages.

• Comfort safety couplings from AIRCRAFT as the first manufacturer to be used in series production
• Two separate locking systems for maximum working safety
• Dangerous whipping of the hose line is prevented

Comfortable and safe to transport and set up

• Ergonomically extended handle for comfortable transport in an almost upright position - strain on the back due to lifting is avoided
• Puncture-proof PU foam wheels and stable steering chassis with parking brake allow easy transport
• The parking brake prevents both turning and rolling movement of the wheels and ensures optimal standing of the compressor
• Practical second transport handle on the boiler, which facilitates carrying the compressor

High quality boiler with durable rust protection

• AIRCRAFT is the first manufacturer to equip the AIRPROFI series compressors with hot-dip galvanized tanks inside and outside as standard
• AIRPROFI series boilers therefore come with a 15-year warranty against rust-through.

• Maximum mechanical efficiency
• No more drive parts required
• Reduction of moving components

• Top-efficient cooling air flow
• Special, ground valves made of stainless steel.

• EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
• High cooling effect and lower noise level due to thermostatically controlled radial fan
• Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirements via automatic message
• Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
• Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
• Easy maintenance due to easily accessible elements
• Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
• Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
• Small external dimensions, thus easy transport and installation

Reducing energy consumption and protecting our precious energy resources has become a global challenge given its impact on the environment. The A-PLUS range, with outputs of 22, 37, 55 and 75 kW, is also available in a speed control version that combines high performance with energy saving solutions. By using a variable speed compressor in a typical installation, you save a significant amount of energy.

• Accurate coverage of the air requirement by continuous control of the engine speed and compressed air generation
• Minimization of unnecessary energy losses by continuous adjustment of the compressed air generation to the actual air requirement
• Energy consumption proportional to the supplied compressed air
• Constant and precise pressure control, adjustable to any value between 6 and 10 bar (13 bar on request)

• Diaphragm pressure regulator with secondary vent
• For compressed air and neutral gases
• Inlet pressure max. 16 bar
• Suitable for temperatures from -10 to +50°C
• Possible to secure with plug-in lock or padlock

• Diaphragm pressure regulator with secondary vent
• For compressed air and neutral gases
• Inlet pressure max. 16 bar
• Suitable for temperatures from -10 to +50°C
• Possible to secure with plug-in lock or padlock

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Energy-efficient IE4 motor
• Rotation direction control for the motor, prevents damage during start-up or after a change of stand location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled radial fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

• Front and additional cooling for maximum durability
• Anti-corrosive surface treatment

• Maximum mechanical efficiency
• No transfer elements
• Highly efficient cooling air fan
• Lamella valves for optimum cost-effectiveness
• Front and additional cooling for maximum durability
• Anti-corrosive surface treatment

• Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
• To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line
• Your advantages through better quality compressed air:
• Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
• Better working and production conditions
• Optimum protection of connected tools and machines
• Improved product quality through reduction of rejects
• Protection of the compressed air system against contamination
• Increase of productivity by reduction of instant maintenance

• for the separation of oil vapors, odors and flavorings via adsorption and in the second stage of solid particles
• Residual content of oil vapor up to 0.005 mg / m³ at 20 ° C and 1 bar
• Operating temperature 1.5 to 45 ° C
• Compressed air quality according to ISO 8573-1
• For compressed air of the highest quality, eg, for breathing air, in analytical technology or semi-luxury bottling
• Pure compressed air in connection with upstream ultrafine filter
• with filter element and manual drain

• Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
• To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line.
• Your advantages through better quality compressed air:
• Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
• Better working and production conditions
• Optimum protection of connected tools and machines
• Improved product quality through reduction of rejects
• Protection of the compressed air system against contamination
• Increase of productivity by reduction of instant maintenance

• for the separation of solid contaminants up to 0.1μm
• Residual oil aerosol content up to 0.1 mg / m³ at 20 ° C and 1 bar
• Operating temperature 1.5 to 65 ° C
• absolute compressed air quality according to ISO 8573-1
• for safe separation of condensate and particles
• complete with filter element and float valve

• Thanks to patented technology, regular service is possible in only 30 seconds and without expensive cleaning
• Wall and floor mounting possible
• Works reliably with any steam trap
• Suitable for all common compressor oils
• Operating media: condensate (air, water, oil), non-aggressive, not suitable for emulsion
• Quick and clean change of the filter cartridge
• No settling tank necessary (no bacteria formation)
• Easy installation due to compact design and small dimensions
• Connection via quick couplings

• Multi-stage oil-water separation via an oil-attracting filter and activated carbon
• After the end of the service life of the filter element this is unscrewed and disposed of completely
• Filter element is tightly closed with plastic cover, so that residual condensate can remain in it
• Locked filter element can be disposed of according to current regulations

• after occurrence of one of the following three cases:
• 4,000 operating hours of the compressor at compressor oil transfer of 2.5 mg / m3
• Discoloration of the polypropylene medium - analysis by simple visual inspection
• At the latest after 12 months (regardless of the operating hours of the compressor)

• Simple and quick installation
• Ideal for compressed air and liquids
• Can be assembled without tools
• Fast, multiple disconnections possible
• Very good flow properties