Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Pot filter for 04-738, 04-739

03-04738151

The pot filter (for 04-738, 04-739) 04-738-151 by NEO TOOLS is characterised by an upper diameter of 15 cm, a lower diameter of 12 cm and a height of 14 cm. It is designed for industrial hoovers numbered 04-738 and 04-739 by NEO TOOLS. This pot-type filter is an essential accessory for the proper functioning of the above-mentioned devices.

7,30€

On request in weeks

Kruvikeeraja otsikud PZ2 25 mm, 100 tk

02-56H624

GRAPHITE kruvikeeraja otsikute komplekt PZ2 on mõeldud Pozidriv‑tüüpi kruvide kinnitamiseks ja lahtikeeramiseks ning sobib eriti hästi seeriatöödeks, kus on vaja kruvida suur hulk kinniteid. 25 mm pikkused otsikud on standardpikkusega ja laialdaselt kasutusel mööbli-, puidu‑ ja üldehitustöödel.

Otsikud on valmistatud kvaliteetsest S2 legeerterasest, mis tagab hea vastupidavuse kulumisele ja mehaanilistele koormustele ning sobib nii käsitööks kui ka elektriliste ja akutoitel kruvikeerajatega töötamiseks. Universaalne 1/4" kuuskantkinnitus tagab ühilduvuse enamiku tööriistade ja otsikuhoidjatega. Komplekt sisaldab 100 üksikut otsikut, mis teeb selle praktiliseks lahenduseks professionaalseks kasutuseks ja töökodadesse.

Tehnilised andmed:

Tüüp: Pozidriv PZ2
Pikkus: 25 mm
Kinnitus: 1/4" kuuskant
Materjal: S2 legeerteras
Komplektis: 100 tk
Kasutusala: mööbli‑ ja puidutööd, üldehitus, seeriakruvimine

24,60€

On request in weeks

Trimmer cord, round, diameter 1.6 mm, length 15 m

03-07100

Round trimmer line diameter 1.6 mm, length 15 m, 07-100 by NEO TOOLS is a round trimmer line for universal use, characterised by a diameter of 1.6 mm and a length of 15 m. This NEO TOOLS brand line is a guarantee of high quality and appropriate durability.

1,20€

On request in weeks

Minipoleerija tarvikute komplekt

03-0460420

Komplekt sisaldab: 2 lihvpaberit kolmes erinevas kareduses (P120, P240, P600) läbimõõduga 5 cm, 2 poleerimispatja (6 cm), 2 keskmise karedusega lihvotsikut ja 2 kõva lihvotsikut (6 cm).

Komplekti on soovitatav kasutada koos 04-604 NEO TOOLS mini poleerijaga.

8,49€

On request in weeks

Otsik PZ3 × 150 mm

03-56574

NEO TOOLS otsik PZ3 on 150 mm pikkune otsik, mis on varustatud 1/4" HEX‑kinnitusega. Otsik on loodud suure deformatsioonikindlusega ning sobib sagedaseks ja intensiivseks kasutamiseks.

Otsik on valmistatud vastupidavast S2 terasest, mis tagab pika kasutusea ja töökindluse ka suure koormuse all. PZ3 otsik on mõeldud POZIDRIV‑tüüpi kruvidele ning leiab kasutust nii professionaalsetes töökodades kui ka isetegemise projektides.

2,50€

On request in weeks

Torx otsik T30 × 25 mm, 3 tk

02-56T519

Torx bits T30 x 25 mm, 3 pieces 56T519 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,00€

On request in weeks

Torx otsik T20 × 25 mm, 3 tk

02-56T522

Torx bits T20 x 25 mm, 3 pieces 56T522 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The bits from the GRAPHITE brand are suitable for many tasks.

1,00€

On request in weeks

Otsik PH1 × 50 mm, 3 tk

02-56T540

Bits PH1 x 50 mm, 3 pieces 56T540 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,20€

On request in weeks

Otsik PZ1 × 25 mm, 3 tk

02-56T537

The PZ1 x 25 mm bits, 3 pieces 56T537 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

0,905€

On request in weeks

Löökotsik PH1 × 25 mm, 2 tk

03-56500

2,10€

On request in weeks

Magnetiline otsikuhoidik 60 mm, 1/4" kuuskant

02-56T510

Magnetic chuck 60 mm, 1/4" Hex 56T510 by GRAPHITE is designed for use with screwdrivers and drill drivers. The magnet holding the bit in the socket makes work more convenient and efficient. The bit size is 1/4" (hexagon). The GRAPHITE brand chuck is made from tool steel. The magnet also makes it possible to attach the blades quickly and prevents them from falling out. The length of 60 mm, on the other hand, makes the handle handy and suitable for working in hard-to-reach places. The product is compatible with most screwdrivers and drills. The GRAPHITE magnetic chuck is ideal for assembly work, carpentry, renovation and anywhere else where a quick change of tool bits is required.

1,30€

On request in weeks

Otsik PH3 × 50 mm, 3 tk

02-56T538

Bits PH3 x 50 mm, 3 pieces 56T538 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,20€

On request in weeks

Torx otsik T15 × 25 mm, 3 tk

02-56T523

Torx bits T15 x 25 mm, 3 pieces 56T523 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,00€

On request in weeks

Löökotsik HEX4 × 25 mm, 2 tk

03-56507

NEO TOOLS HEX4 löökotsikud on kompaktsed ja löögikindlad otsikud kuuskantpeaga kruvide jaoks, mis on valmistatud vastupidavast S2 terasest ja sobivad intensiivseteks montaažitöödeks.

HEX4 profiil tagab kruvis kindla ja täpse istuvuse, vähendades libisemist ja kulumist. 1/4" HEX‑kinnitus tagab laia ühilduvuse erinevate otsikuhoidikute ja otsikumagasinidega.

2‑osaline komplekt võimaldab otsikuid mugavalt vahetada ja tagab töö sujuvuse hoolduses, montaažil ning töökojas.

2,10€

On request in weeks

Otsik PZ2 × 50 mm, 3 tk

02-56T533

PZ2 x 50 mm bits, 3 pieces 56T533 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,20€

On request in weeks

Kuuskantotsik H5 × 25 mm, 3 tk

02-56T530

Hex bits H5 x 25 mm, 3 pieces 56T530 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,00€

On request in weeks

Löökotsik PH2 × 25 mm, 2 tk

03-56501

NEO TOOLS PH2 löökotsikud on 25 mm pikkused kruvikeerajaotsikud. Komplekt sisaldab 2 otsikut.

Otsikud on valmistatud vastupidavast S2 terasest, mis tagab suure kulumiskindluse ja töökindluse ka intensiivsel kasutamisel. Neil on 1/4" HEX‑kinnitus, mis sobib enamiku löökkruvikeerajate ja otsikuhoidikutega.

NEO TOOLS löökotsikud sobivad suurepäraselt nii professionaalseks kasutamiseks kui ka isetegemise töödeks, pakkudes usaldusväärset ja täpset tulemust.

2,10€

On request in weeks

Otsik PH2 × 50 mm, 3 tk

02-56T539

Bits PH2 x 50 mm, 3 pieces 56T539 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,20€

On request in weeks

Torx otsik T25 × 25 mm, 3 tk

02-56T521

Torx bits T25 x 25 mm, 3 pieces 56T521 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The bits from the GRAPHITE brand are suitable for many tasks.

1,00€

On request in weeks

Otsik PZ3 × 50 mm, 3 tk

02-56T532

PZ3 x 50 mm, 3 pieces 56T532 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,20€

On request in weeks