Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Kruvikeeraja otsikud piirajaga PH2 25 mm, 2 tk

02-56T551

GRAPHITE PH2 kruvikeeraja otsikute komplekt koosneb kahest 25 mm pikkusest otsikust, mis on varustatud sügavuspiirajaga. Piiraja võimaldab kruvide täpset ja ühtlast sügavusse keeramist, vältides materjali kahjustamist. Sellised otsikud sobivad eriti hästi kipsplaadi, paneelide ja muude plaatmaterjalide paigaldamiseks.

Otsikud on valmistatud kulumiskindlast kroom‑vanaadiumterasest (CrV), mis tagab hea vastupidavuse ja pika kasutusea. Standardne 1/4" kuuskantkinnitus muudab need ühilduvaks enamiku akutrellide ja kruvikeerajatega.

Tehnilised andmed:

Tüüp: Phillips PH2
Pikkus: 25 mm
Kinnitus: 1/4" kuuskant
Materjal: kroom‑vanaadiumteras (CrV)
Lisafunktsioon: sügavuspiiraja
Komplektis: 2 tk
Kasutusala: kipsplaadi ja paneelide paigaldus, üldised kruvitööd

1,20€

On request in weeks

Kruvikeeraja otsikud piirajaga PZ1 25 mm, 2 tk

02-56T550

GRAPHITE PZ1 kruvikeeraja otsikute komplekt koosneb kahest 25 mm pikkusest otsikust, mis on varustatud sügavuspiirajaga. Piiraja võimaldab kruvide ühtlast ja kontrollitud sügavusse keeramist ning aitab vältida materjali kahjustamist. Sellised otsikud sobivad eriti hästi kipsplaadi, paneelide ja muude plaatmaterjalide paigaldamiseks.

Otsikud on valmistatud vastupidavast kroom‑vanaadiumterasest (CrV), mis tagab hea kulumiskindluse ja pika kasutusea. Standardne 1/4" kuuskantkinnitus teeb need ühilduvaks enamiku akutrellide ja kruvikeerajatega.

Tehnilised andmed:

Tüüp: Pozidriv PZ1
Pikkus: 25 mm
Kinnitus: 1/4" kuuskant
Materjal: kroom‑vanaadiumteras (CrV)
Lisafunktsioon: sügavuspiiraja
Komplektis: 2 tk
Kasutusala: kipsplaadi ja paneelide paigaldus, üldised kruvitööd

1,20€

On request in weeks

Süvistiotsik PH1 × 25 mm, 2 tk

02-56T552

PH1 x 25mm stop bits, 2 pieces 56T552 by GRAPHITE is a 25mm long PH1 stop bit set containing 2 pieces made from durable CrV steel. The bits are fitted with a ¼" chuck, making them compatible with most drills and drill drivers. The bits with depth stop enable precise and safe screwdriving, especially when installing plasterboard or panels. Suitable for effectively tightening and loosening screws, the GRAPHITE stop bits will prove useful for many tasks.

1,20€

On request in weeks

Otsik PZ2 × 25 mm, 3 tk

02-56T536

PZ2 x 25 mm, 3 pieces 56T536 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

0,905€

On request in weeks

Otsik SL5 × 0,8 × 25 mm, 3 tk

02-56T546

SL5 x 0.8 x 25 mm bits, 3 pieces 56T546 by GRAPHITE is a set of three bits designed for assembly and service work. Each bit has a flat end of 5mm wide and 0.8mm thick. The working length of the bit is 25mm. They are made from durable CrV steel, ensuring durability and wear resistance. The standard 1/4" chuck makes GRAPHITE bits compatible with most drills and drill drivers. The product is designed for tightening and loosening screws and bolts with a flat socket.

0,905€

On request in weeks

Torx otsik T40 × 25 mm, 3 tk

02-56T518

Torx bits T40 x 25 mm, 3 pieces 56T518 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,00€

On request in weeks

Torx otsik T8 × 25 mm, 3 tk

02-56T526

Torx T8 x 25 mm, 3 pieces 56T526 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,00€

On request in weeks

Torx otsik T9 × 25 mm, 3 tk

02-56T525

Torx bits T9 x 25 mm, 3 pieces 56T525 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The bits from the GRAPHITE brand are suitable for many tasks.

1,00€

On request in weeks

Kuuskantotsik H4 × 25 mm, 3 tk

02-56T531

Hex bits H4 x 25 mm, 3 pieces 56T531 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The bits from the GRAPHITE brand are suitable for many tasks.

1,00€

On request in weeks

Kleebiste eemaldusketas 88 mm

02-55H811

GRAPHITE liimieemaldusketas 55H811 läbimõõduga 88 mm on tõhus tööriist kleebiste ja liimijääkide eemaldamiseks auto keredelt nii professionaalseks kui ka hobikasutuseks. Ketas on valmistatud vastupidavast, kuid samas pehmest kummist, mis ei kriimusta pinda. Ketta paksus on 15 mm ja maksimaalne lubatud pöörlemiskiirus 4000 p/min. Sobib kasutamiseks ka muudel töödel.

8,00€

On request in weeks

Juhtplaat mudelile 58GE116

02-58GE116-73

The guide bar for 58GE116, 58GE116-73 by GRAPHITE is an overall length of 5"/13cm, with a usable range of 4"/10cm, recommended for the mini cordless chainsaw with part number 58GE116. The GRAPHITE guide bar provides smooth, efficient operation for woodworking professionals.

9,30€

On request in weeks

Kuuskantotsik H6 × 25 mm, 3 tk

02-56T529

Hex bits H6 x 25 mm, 3 pieces 56T529 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,00€

On request in weeks

Kuuskantotsik H8 × 25 mm, 3 tk

02-56T528

Hex bits H8 x 25 mm, 3 pieces 56T528 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,00€

On request in weeks

Otsik SL6 × 1 × 25 mm, 3 tk

02-56T545

SL6 x 1 x 25 mm bits, 3 pieces 56T545 by GRAPHITE is a set of three bits designed for assembly and service work. Each bit has a flat end 6mm wide and 1mm thick. The working length of the bit is 25 mm. They are made from durable CrV steel, ensuring durability and wear resistance. The standard 1/4" chuck makes GRAPHITE bits compatible with most drills and drill drivers. The product is designed for tightening and loosening screws and bolts with a flat socket.

0,905€

On request in weeks

Torx otsik T6 × 25 mm, 3 tk

02-56T527

Torx bits T6 x 25 mm, 3 pieces 56T527 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,00€

On request in weeks

Otsik PZ3 × 25 mm, 3 tk

02-56T535

PZ3 x 25mm, 3 piece 56T535 bits by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

0,905€

On request in weeks

Otsik PH0 × 25 mm, 3 tk

02-56T544

PH0 x 25 mm, 3 pieces 56T544 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

0,905€

On request in weeks

Saekett mudelile 58GE116

02-58GE116-71

The chain for 58GE116, 58GE116-71 by GRAPHITE is a chain characterised by a 1.1mm guide link width and 0.3" (7.62mm) pitch. It has 23 links and is designed for GRAPHITE's Energy+ mini cordless chainsaw. It will work well for many garden and workshop tasks.

12,40€

On request in weeks

Otsik PH1 × 25 mm, 3 tk

02-56T543

The PH1 x 25 mm, 3 piece 56T543 bits by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

0,905€

On request in weeks

Otsik PZ1 × 50 mm, 3 tk

02-56T534

The PZ1 x 50 mm bits, 3 pieces 56T534 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.

1,20€

On request in weeks