Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Takjakinnitusega lihvpaber 115 × 230 mm, K100, 5 tk, avadega

02-55H723

Velcro sand paper GRAPHITE (ref. no. 55H723) with dimensions 115 x 230 mm and granulation 100, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

3,20€

Laost otsas. Tellides tarneaeg nädalat

Metallipuur HSS-CNC, 124°, "Pro-Tec", 12,0 mm

02-55H038

GRAPHITE metal drill with 12.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.

10,40€

Laost otsas. Tellides tarneaeg nädalat

HSS-Co metallipuur 5,2 mm, 10 tk

02-57H034-10

Metal drills GRAPHITE (ref. no. 57H034-10) with diameters 5.2 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.

23,40€

Laost otsas. Tellides tarneaeg nädalat

Löökkruvikeeraja otsikute komplekt PH1/2/3, PZ1/2/3 × 25 mm, 6 tk

02-56H540

Komplekt sisaldab:

3 Phillips otsikut: PH1, PH2, PH3
3 Pozidriv otsikut: PZ1, PZ2, PZ3

Kõigi otsikute pikkus on 25 mm.

3,79€

Laost otsas. Tellides tarneaeg nädalat

Metallipuuride komplekt HSS-CNC, 124°, "Pro-Tec", 4,0–10,0 mm, 5 tk

02-55H086

Pro-Tec HSS-CNC metallipuuride komplekt sisaldab viit enimkasutatavat puurisuurust vahemikus 4,0–10,0 mm, sobides suurepäraselt metalli, värviliste metallide ja plastide täpseks puurimiseks. Komplekt on mõeldud nii professionaalsetele kasutajatele kui ka nõudlikele kodumeistritele.

Puurid on valmistatud kvaliteetsest HSS kiirlõiketerasest ning varustatud 124° tipugeomeetriaga, mis tagab täpse tsentreerimise, vähendab puuri libisemist ja võimaldab stabiilset puurimisprotsessi. Tänu kvaliteetsele töötlusele on puurid vastupidavad ning tagavad puhtad ja täpsed puurimistulemused.

Toote omadused:

Komplektis 5 metallipuuri
Mõõdud: 4,0 mm, 5,0 mm, 6,0 mm, 8,0 mm ja 10,0 mm
Tüüp: HSS-CNC metallipuurid
Seeria: Pro-Tec
Tipunurk: 124°
Täpne puurimise algus ja stabiilne juhtimine
Hea kulumiskindlus ja pikk kasutusiga
Sobib professionaalseks ning igapäevaseks kasutamiseks

Sobib materjalidele:

Teras
Malm
Alumiinium
Vask
Messing
Plastid

18,60€

Laost otsas. Tellides tarneaeg nädalat

Metallipuur HSS 5,0 mm, 10 tk

01-60H450

HSS metallipuuride komplekt sisaldab 10 kvaliteetset 5,0 mm läbimõõduga puuri, mis on mõeldud metalli töötlemiseks. Puurid on valmistatud vastupidavast 4241 kiirlõiketerasest (HSS), mis tagab hea töökindluse ja kulumiskindluse igapäevastes puurimistöödes. Komplekt sobib nii harrastajatele kui ka üldotstarbeliseks kasutamiseks töökojas.

Tehnilised andmed:

Tüüp: HSS metallipuur
Läbimõõt: 5,0 mm
Komplektis: 10 puuri
Materjal: HSS 4241 kiirlõiketeras
Tipunurk: 118°
Ristterakorrektsioon: jah
Standard: DIN 338

4,30€

Laost otsas. Tellides tarneaeg nädalat

Võrklihvkettad seinade ja lagede akulihvijale (5 tk), φ225mm, A180 DSL801

43-D-82236

Võrklihvketastel on väga hea tolmueemaldus, sest tolm liigub läbi võrgu, mitte ei ummista pinda. Vähem lenduvat tolmu ja parem nähtavus lihvimisel.

15,44€ 19,80€

Laost otsas. Tellides tarneaeg nädalat

SDS Plus kivipuur 9 × 260 mm, S4 tüüpi, neljalõikeline

02-57H419

Kinnitus: SDS Plus
Tüüp: kivipuur, S4 topeltspiraal
Läbimõõt: 9 mm
Kogupikkus: 260 mm
Otsik: peeneteralisest kõvasulamist ristotsik
Lõikeservad: 4 (neljalõikeline)
Spiraal: kahekordne S4 spiraal
Sobivad materjalid: betoon, tellis, müüritis, kivi

3,79€

Laost otsas. Tellides tarneaeg nädalat

Lihvpaber 115 × 160 mm, K80, 3 tk

02-55H816

GRAPHITE abrasive papers are used for rough sanding of wood and metal surfaces. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system.

2,19€

Laost otsas. Tellides tarneaeg nädalat

Lihvkäsn 98 × 25 × 68 mm, K80, kaldservaga

02-55H925

Angle sanding sponge GRAPHITE (ref. no. 55H925) with dimensions 98 x 25 x 68 mm and granulation 80. Designed for finishing work. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on four sides of the sponge. The sponge shape fits well in your hand. The abrasive sponge has one oblique side and one curved side, which make hard-to-reach places easily accessible for processing. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

1,50€

Laost otsas. Tellides tarneaeg nädalat

Takjakinnitusega lihvpaber 115 × 230 mm, K40, 5 tk, avadega

02-55H720

Velcro sand paper GRAPHITE (ref. no. 55H720) with dimensions 115 x 230 mm and granulation 40, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

3,20€

Laost otsas. Tellides tarneaeg nädalat

Kivipuur must‑valge 8x120mm

01-60H176

Masonry drill VERTO (ref no. 60H176) with 8.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

1,20€

Laost otsas. Tellides tarneaeg nädalat

Takjakinnitusega lihvpaber 115 × 230 mm, K120, 5 tk, avadega

02-55H724

Velcro sand paper GRAPHITE (ref. no. 55H724) with dimensions 115 x 230 mm and granulation 120, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

3,20€

Laost otsas. Tellides tarneaeg nädalat

HSS-Co metallipuur 4,8 mm, 10 tk

02-57H030-10

Metal drills GRAPHITE (ref. no. 57H030-10) with diameters 4.8 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.

19,00€

Laost otsas. Tellides tarneaeg nädalat

Takjakinnitusega lihvpaber 115 × 230 mm, K60, 5 tk, avadega

02-55H721

Velcro sand paper GRAPHITE (ref. no. 55H721) with dimensions 115 x 230 mm and granulation 60, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

3,20€

Laost otsas. Tellides tarneaeg nädalat

Kruvikeeraja otsikute komplekt hoidikuga, 7 osa

03-06101

Komplekti kuulub:

6 × 25 mm kruvikeerajaotsikut

1 × 60 mm magnetiline otsikuhoidja

6,80€

Laost otsas. Tellides tarneaeg nädalat

Veekindel lihvpaber 230 × 280 mm, K1200

02-55H908

Water abrasive paper GRAPHITE (ref. no. 55H908) in a sheet with dimensions 230 x 280 mm and granulation 1200. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

0,595€

Laost otsas. Tellides tarneaeg nädalat

Tikksae terade komplekt T-varrega, 10 tk

02-57H755

GRAPHITE set of jigsaw blades contains 10 blades designed for cutting various materials. 8 blades for wood (rough, fine and arc cutting), 1 blade for metal and 1 universal blade for wood and metal. All blades have the most popular T shank that allows installation in most jigsaws available on the market.

15,60€

Laost otsas. Tellides tarneaeg nädalat

Metallipuur HSS-CNC, 124°, "Pro-Tec", 3,5 mm

02-55H016

GRAPHITE metal drill with 3.5 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.

1,50€

Laost otsas. Tellides tarneaeg nädalat

Lihvkäsn 120 × 95 × 10 mm, K60

02-55H912

Abrasive sponge GRAPHITE (ref. no. 55H912) with dimensions 120 x 95x 10 mm and granulation 60. Designed for finish grinding. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on both sides of the sponge. Thanks to its soft structure, the sponge adapts perfectly to the shape of ground surfaces. The sponge can be cut into smaller pieces to process hard-to-reach areas. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

1,00€

Laost otsas. Tellides tarneaeg nädalat