Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Lihvkangas rullis 115 mm, K60, 2,5 m

02-55H868

Sanding cloth GRAPHITE (ref. no. 55H868) in a roll, 2.5 m long, 115 mm wide and granulation 60. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

3,00€

On request in weeks

Fiiberketas 125 mm, K120, 3 tk

02-55H859

Fibra sanding disc GRAPHITE (ref. no. 55H851) with outer diameter 125 mm and granulation 60. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

2,60€

On request in weeks

Võrklihvkettad seinade ja lagede akulihvijale (5 tk), φ225mm, A320 DSL801

43-D-82258

Võrklihvketastel on väga hea tolmueemaldus, sest tolm liigub läbi võrgu, mitte ei ummista pinda. Vähem lenduvat tolmu ja parem nähtavus lihvimisel.

15,44€ 19,80€

On request in weeks

Metallipuur HSS 4,0 mm, 10 tk

01-60H440

HSS metallipuuride komplekt sisaldab 10 kvaliteetset 4,0 mm läbimõõduga puuri, mis on mõeldud metalli töötlemiseks. Puurid on valmistatud vastupidavast 4241 kiirlõiketerasest (HSS), mis tagab hea töökindluse ja kulumiskindluse. 118° tipunurk ning ristterakorrektsioon võimaldavad täpset puurimise alustamist ja sujuvat tööprotsessi. Puurid vastavad DIN 338 standardile.

Tehnilised andmed:

Tüüp: HSS metallipuur
Läbimõõt: 4,0 mm
Komplektis: 10 puuri
Materjal: HSS 4241 kiirlõiketeras
Tipunurk: 118°
Ristterakorrektsioon: jah
Standard: DIN 338

3,30€

On request in weeks

Metallipuur HSS 3,0 mm, 10 tk

01-60H430

HSS metallipuuride komplekt sisaldab 10 kvaliteetset 3,0 mm läbimõõduga puuri, mis on mõeldud metallide puurimiseks. Puurid on valmistatud 4241 kiirlõiketerasest (HSS), mis tagab hea vastupidavuse ja töökindluse igapäevasel kasutamisel. 118° tipunurk koos ristterakorrektsiooniga võimaldab täpset puurimise alustamist ning vähendab puuri kõrvalekaldumise ohtu. Vastavad DIN 338 standardile.

Tehnilised andmed:

Tüüp: HSS metallipuur
Läbimõõt: 3,0 mm
Komplektis: 10 puuri
Materjal: HSS 4241 kiirlõiketeras
Tipunurk: 118°
Ristterakorrektsioon: jah
Standard: DIN 338

2,41€

On request in weeks

Lihvpaber 230 × 280 mm, K80

02-55H887

Sanding paper GRAPHITE (ref. no. 55H887) in a sheet with dimensions 230 x 280 mm and granulation 80. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

0,397€

On request in weeks

Juhtsiin 1400 mm, 2 pitskruviga

02-58G495-731

GRAPHITE guide rail enabling parallel penetration of the cutting disc and free and even guidance of the saw-digger. The high-quality aluminum strip is equipped with a rubber anti-splinter insert, teflon slides, and a special anti-slip tape mounted on the underside of the strip, which significantly increases comfort and safety of work. On the first use, the rubber bar will automatically adjust to the tool used. It is possible to attach the rail to the surface using dedicated clamps, which allows precise and accurate cutting of the material. The attached strip to the cut surface allows the user to focus on the work to achieve the desired cutting effect. Thanks to specially profiled grooves, the clamps do not interfere during work. The guide rail is dedicated for use together with the GRAPHITE circular saw

69,40€

On request in weeks

Metallipuuride komplekt HSS-CNC, 124°, "Pro-Tec", 1,0–13,0 mm, 25 tk

02-55H090

Pro-Tec HSS-CNC metallipuuride komplekt sisaldab 25 kvaliteetset metallipuuri mõõtudega 1,0–13,0 mm, pakkudes täielikku valikut enamlevinud puurisuurusi professionaalseteks metalli- ja plastitöödeks. Komplekt sobib suurepäraselt töökojale, tootmisse, ehitusobjektile ning nõudlikule kodukasutajale.

Puurid on valmistatud vastupidavast HSS kiirlõiketerasest ning varustatud 124° tipugeomeetriaga, mis tagab täpse tsentreerimise, sujuva puurimise alguse ja stabiilse juhtimise. Tänu kvaliteetsele töötlusele on puurid kulumiskindlad ning tagavad puhtad ja täpsed puurimistulemused erinevates materjalides.

Toote omadused:

Komplektis 25 metallipuuri
Mõõduvahemik: 1,0–13,0 mm
Tüüp: HSS-CNC metallipuurid
Seeria: Pro-Tec
Tipunurk: 124°
Täpne tsentreerimine ja stabiilne juhtimine
Kõrge kulumiskindlus ja pikk kasutusiga
Sobib professionaalseks kasutamiseks

Sobib materjalidele:

Teras
Malm
Alumiinium
Vask
Messing
Plastid

102,10€

On request in weeks

Lihvpaber 115 × 160 mm, K60, 3 tk

02-55H814

GRAPHITE abrasive papers are used for rough sanding of wood and metal surfaces. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system.

2,19€

On request in weeks

Täiskõvasulamist saeketas 315 × 30 mm, 40 hammast

02-55H607

Solid carbide saw blade GRAPHITE (ref. no. 55H607) with diameters 315 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.

50,51€

On request in weeks

Lihvpaber rullis 115 mm, K180, 2,5 m

02-55H865

Sanding paper GRAPHITE (ref. no. 55H865) in a roll, 2.5 m long, 115 mm wide and granulation 180. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

2,29€

On request in weeks

Puidupuur liblik komplekt 10, 12, 16, 18, 20, 25 mm, 6 tk

01-60H804

Set of flat wood drills VERTO (Ref. 60H804) with diameters from 6.0 mm to 25 mm, thanks to the special profile blades allow double the drilling speed and avoid the effect of pulling the material. Hexagonal grip, allows the use in magnetic holders in cordless drills.

14,50€

On request in weeks

Lihvkangas 230 × 280 mm, K36

02-55H873

Sanding cloth GRAPHITE (ref. no. 55H873) in a sheet with dimensions 230 x 280 mm and granulation 36. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

0,806€

On request in weeks

Piiksae tera, HM, 228 × 24 × 1,25 mm, 6 TPI

02-56H034

Blade for reciprocating saw GRAPHITE about the length 228 mm and 6 with teeth an inch long used for cutting fiber-cement, plasterboard, concrete, fiberglass and resin reinforced composites with saber saws. The maximum thickness of the materials is 175 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.

20,20€

On request in weeks

Takjakinnitusega deltalihvpaber 93 × 93 mm, K120, 5 tk, avadega

02-55H767

Delta sanding paper GRAPHITE (ref. no. 55H767), size 93 x 93 mm and granulation K120. Dedicated to grinding wood, wood-based materials, metals and plastics. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system. Product with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

1,20€

On request in weeks

Lihvkettad 225 mm, K80, 5 tk, takjakinnitusega

02-55H779

Takjakinnitusega lihvkettad on mõeldud kipsi- ja pahtelpindade lihvimiseks pika varrega lihvijatega. 225 mm läbimõõduga ja K80 karedusega kettad sobivad materjali intensiivsemaks eemaldamiseks, pindade tasandamiseks ning ettevalmistustöödeks enne peenlihvimist. Ketta kogu pinnale paigutatud perforatsioon võimaldab lihvimistolmu tõhusat eemaldamist, vähendab pinna ülekuumenemist ning pikendab lihvketta kasutusiga. Takjakinnitus tagab kiire ja mugava ketaste vahetamise.

Tehnilised andmed:

Läbimõõt: 225 mm
Karedus: K80
Kinnitus: takjakinnitus (Velcro / hook & loop)
Kogus pakendis: 5 tk
Materjal: alumiiniumoksiid
Sobib mudelile: GRAPHITE 59G260
Tootjakood: 55H779
EAN: 5902062502674

11,80€

On request in weeks

Lihvpaber 230 × 280 mm, K180

02-55H891

Sanding paper GRAPHITE (ref. no. 55H891) in a sheet with dimensions 230 x 280 mm and granulation 180. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

0,397€

On request in weeks

Bimetall augusaag 83 mm

01-60H942

VERTO bimetal hole cutter diameter 83 mm with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.

17,50€

On request in weeks

Lihvpaber 230 × 280 mm, K120

02-55H889

Sanding paper GRAPHITE (ref. no. 55H889) in a sheet with dimensions 230 x 280 mm and granulation 120. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.

0,397€

On request in weeks

SDS Plus kivipuuride komplekt, neljalõikeline, 5, 6 × 110 mm + 8, 10, 12 × 160 mm, 5 tk

02-57H572

Kinnitus: SDS Plus
Tüüp: kivipuuride komplekt
Puuride mõõdud:

5 × 110 mm

6 × 110 mm

8 × 160 mm

10 × 160 mm

12 × 160 mm

Otsik: peeneteralisest kõvasulamist ristotsik
Lõikeservad: 4 (neljalõikeline)
Spiraal: kahekordne S4 spiraal
Komplektis: 5 puuri
Sobivad materjalid: betoon, keraamilised materjalid, tellis, müüritis, kivi

20,20€

On request in weeks