GRAPHITE metal drill with 4.8 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
GRAPHITE bimetal hole cutter with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials.
Segmented diamond disc VERTO (ref. no. 61H3S8) with an outer diameter of 180 mm allows for efficient cutting concrete, reinforced concrete, marble, stone, brick etc. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Two GRAPHITE guide rails with a length of 700 mm each, allow parallel penetration of the cutting disc and free and even guidance of the sawing and lapping machines. High quality aluminum strips are equipped with a rubber anti-splinter insert, teflon slides, and a special non-slip tape mounted on the underside of the strips, which significantly increases comfort and safety of work. On the first use, the rubber bar will automatically adjust to the tool used. It is possible to quickly connect two rails when cutting long materials using a self-aligning connecting element. It is possible to fasten the rails to the surface using dedicated clamps, which enables precise and accurate cutting of the material. The attached slats for the cut surface allow the user to focus on the work to achieve the desired cutting effect. Thanks to specially profiled grooves, the clamps do not interfere during work. The guide rail is dedicated for use together with the GRAPHITE circular saw.
Velcro sand paper GRAPHITE (ref. no. 55H738) with dimensions 93 x 185 mm and granulation 80, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging . Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE jigsaw blades are used for semi- precise cutting of wood and plastic. T shank allows to use the blades in all jigsaws with BOSCH holder and universal holder. Use of CrV steel (chromium- vanadium) gives high elasticity and resistance to high temperatures. Polished side surfaces of the blade reduce friction and blade heating during cutting.
Sanding cloth GRAPHITE (ref. no. 55H867) in a roll, 2.5 m long, 115 mm wide and granulation 40. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Water abrasive paper GRAPHITE (ref. no. 55H902) in a sheet with dimensions 230 x 280 mm and granulation 220. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Metal drills GRAPHITE (ref. no. 57H014-10) with diameters 2.0 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
NEO set of 1/4" driver bits includes 99 pieces. Thanks to use of S2 alloy steel, the hardness of driver bits is 60 HRC, which substantially improves life time and quality of work. The set features wide range of standard and special driver bits with 25 mm length. The set also includes bit adapters and hook holder. TÜV Rheinland certificate guarantees high quality and reliability of the product. NEO brand meets expectations of professionals.
Masonry drill VERTO (ref. no. 60H578) with SDS+ shank, 14.0 mm diameter, with crossed tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Sanding paper GRAPHITE (ref. no. 55H861) in a roll, 2.5 m long, 115 mm wide and granulation 80. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Water abrasive paper GRAPHITE (ref. no. 55H901) in a sheet with dimensions 230 x 280 mm and granulation 180. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Solid carbide saw blade GRAPHITE (ref. no. 55H605) with diameters 180 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.
Solid carbide saw blade VERTO (ref. no. 61H108) with an outer diameter of 250 mm, reduced thickness allows to obtain higher cutting speed. Teeth with sintered carbide tips YG8A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Metal drills GRAPHITE (ref. no. 57H020-10) with diameters 3.0 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
Metal drills GRAPHITE (ref. no. 57H062-5) with diameters 12.0 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
Masonry drill VERTO (ref. no. 60H625) with SDS+ shank 12.0 mm diameter, tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Fibra sanding disc GRAPHITE (ref. no. 55H858) with outer diameter 125 mm and granulation 100. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
