Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Koonusfrees 4–12 mm + avardaja 12,4 mm + frees 6 × 90 mm + süvistaja 8–20 mm, TiN

02-54T301

Step drills 4-12 mm, reamer 12.4 mm, router bit 6 x 90 mm, countersink 8-20 mm, TiN, set of 4 pieces 54T301 by GRAPHITE is a set of 4 pieces (step drill, reamer, router bit and countersink), made of robust HSS steel with TIN coating. The tools are recommended for working with sheet metal, plastic and wood. Recommended for DIY enthusiasts.

10,80€

Laost otsas. Tellides tarneaeg nädalat

Puidupuur liblik 12 x 152 mm

02-54T501

The paddle wood drill, 12 x 152 mm 54T501 by GRAPHITE is a paddle type drill with Hex shank, characterised by a diameter of 12 mm and a length of 152 mm. The recommended maximum speed when working with it is 1750 rpm. The GRAPHITE brand drill bit is recommended for wood and plywood. It will prove useful in a domestic carpenter's shop.

1,40€

Laost otsas. Tellides tarneaeg nädalat

SDS Max lame meisel 50 × 400 mm, 25° nurga all

03-57550

Professionaalseks kasutamiseks mõeldud tööriist betooni, keraamika ja muude kõvade ehitusmaterjalide töötlemiseks. Meisel on varustatud SDS Max kinnitusega, mis tagab kindla ja töökindla ühenduse SDS Max süsteemiga piik- ning puurvasaratega.

Meisli tööosa laius on 50 mm, kogupikkus 400 mm ning varre läbimõõt 18 mm. Tööriista eripäraks on 25° nurga all olev tera, mis võimaldab efektiivsemalt eemaldada plaate, krohvi ja muid pinnakatteid ning tagab tööriista optimaalse sisenemisnurga materjali sisse.

Tehnilised andmed:

Kinnitus: SDS Max
Tera laius: 50 mm
Kogupikkus: 400 mm
Läbimõõt: 18 mm
Tera nurk: 25°
Sobib tööks betooni ja keraamikaga

Omadused:

Sobib meiseldamiseks ja lammutustöödeks
Efektiivne plaatide, krohvi ja muude pinnakatete eemaldamisel
25° nurga all olev tera tagab parema tööefektiivsuse
Vastupidav konstruktsioon professionaalseks kasutamiseks
Ühilduv kõigi SDS Max kinnitusega piik- ja puurvasaratega

10,80€

Laost otsas. Tellides tarneaeg nädalat

SDS+ kivipuur 10 x 110 mm, 4 lõikeservaga

02-54H108

Kinnitus: SDS Plus
Tüüp: raudbetoonipuur (QUATRO)
Läbimõõt: 10 mm
Kogupikkus: 110 mm
Otsik: peeneteralisest kõvasulamist ristotsik
Lõikeservade arv: 4 (QUATRO)
Spiraal: kahekordne spiraal
Sobivad materjalid: raudbetoon, betoon, müüritis, kivi

3,40€

Laost otsas. Tellides tarneaeg nädalat

Terashari ketaslõikurile 150 × 25,4 mm, jäik

02-55H100

150 x 25.4 mm hard wire brush for petrol scythe, tangled 55H100 by GRAPHITE is a brush wheel for petrol scythe. It has dimensions of 150 x 25.5 mm outer diameter and inner bore. Allows cleaning of paving stones and metal surfaces. It is made of durable wire weave. GRAPHITE brand is a guarantee of durability for years.

22,00€

Laost otsas. Tellides tarneaeg nädalat

SDS+ kivipuur 12 x 260 mm, 4 lõikeservaga

02-54H118

The SDS Plus 12 x 260 mm, quarto 54H118 reinforced concrete drill bit by GRAPHITE is an accessory characterised by its 12 mm diameter and 260 mm length. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks) it is perfect for working in reinforced concrete. This extremely durable tool from the GRAPHITE brand is recommended to professionals for intensive use.

5,60€

Laost otsas. Tellides tarneaeg nädalat

Adapter HEX-augusaagidele ja tsentripuurile M22, 200 mm

02-55H330

Hex adapter and M22 17/200 mm pilot drill 55H330 by GRAPHITE is a Hex adapter and M22 17/200 mm pilot drill set for a variety of construction and renovation tasks. The adapter features an overall length of 200 mm. The drill bit, on the other hand, is 110 mm long and has a diameter of 8 mm. The adapter is made of robust 40 Cr steel. A tool recommended for professionals as well as DIY enthusiasts.

6,70€

Laost otsas. Tellides tarneaeg nädalat

SDS Plus slotted point 14 x 250 mm

03-57553

The SDS Plus grooved pick 14 x 250 mm 57-553 by NEO is a pick with a diameter of 14 mm and an overall length of 250 mm, which is designed for work in concrete. The design with SDS Plus shank ensures compatibility with hammer drills and percussion hammers equipped with this mounting system. The profile of the NEO TOOLS tool allows grooves to be formed in concrete substrates with stable guidance.

6,30€

Laost otsas. Tellides tarneaeg nädalat

Karbiidkroonpuur 65 mm

02-55H327

The GRAPHITE 65 mm 55H327 widia hole saw is a hole saw characterised by a diameter of 65 mm and a height of 72 mm. It offers a drilling depth of 50 mm. Fitted with an M22 thread, it provides a solid attachment. The GRAPHITE branded hole saw is made from durable TCT steel. Thanks to its robust construction and abrasion resistance, it is recommended for demanding concrete tasks.

10,80€

Laost otsas. Tellides tarneaeg nädalat

Puidupuur liblik 10, 13, 16, 19, 22, 25 mm, komplekt 6 tk

02-54T515

Blade type wood drill bits: 10, 13, 16, 19, 22, 25 mm, set of 6 pieces 54T515 by GRAPHITE is a set of 6 shovel-type drills with Hex shank, characterised by diameters of 10, 13, 16, 19, 22, 25 mm and a length of 152 mm. The recommended maximum speed when working with them is 1750 rpm. GRAPHITE brand drills are recommended for wood and plywood. They will work well in a domestic carpenter's shop.

6,40€

Laost otsas. Tellides tarneaeg nädalat

Puidupuur liblik 32 x 152 mm

02-54T511

GRAPHITE's paddle-type wood drill, 32 x 152 mm 54T511 is a paddle-type drill with Hex shank, characterised by a diameter of 32 mm and a length of 152 mm. The recommended maximum speed when working with it is 1750 rpm. The GRAPHITE brand drill bit is recommended for wood and plywood. It will prove useful in a domestic carpenter's shop.

2,41€

Laost otsas. Tellides tarneaeg nädalat

Co8% bimetall-augusaagide komplekt (19, 25, 30, 35, 40, 68 mm), 9 tk

02-57H921

Co8% bi-metal holesaws (19, 25, 30, 35, 40, 68 mm), 9 piece set 57H921 by GRAPHITE is a set of six Co8% bi-metal holesaws with diameters: 19, 25, 30, 35, 40 and 68 mm. The tools offer a maximum drilling depth of 44 mm. Their height is 50 mm. They are recommended for working with INOX, metal, plastic, aluminium and copper materials. The set also includes a universal shank with ¼" round shank (6.35 mm) and with 7/16" hex shank (11 mm), two HSS centring drills (6.35 x 105 mm diameter, 6.35 x 75 mm diameter) and accessories - 2-way adapter, washer, allen key. This is a multi-tasking set for professionals and DIYers from the GRAPHITE brand.

52,70€

Laost otsas. Tellides tarneaeg nädalat

Abrasive sponge 70 x 25 x 100 mm, K80

03-55916

The 70 × 25 × 100 mm, P80, 55-916 abrasive sponge by NEO TOOLS is a 70 × 25 × 100 mm tool with gradation P80, designed for working with metal, plastics and wood. The flexible backing allows even sanding of flat and profiled surfaces, and the 70 × 25 mm format provides a comfortable grip when working by hand. The P80 model from NEO TOOLS is suitable for intermediate and finishing sanding.

1,10€

Laost otsas. Tellides tarneaeg nädalat

SDS Max meisel 40 × 40 mm, 16 hambaga

02-57H552

GRAPHITE SDS Max Chisel (ref. 57H552) with a 40 x 40 mm working tip width and 16 teeth gives the material being worked on a pebbled texture, increasing its roughness for more effective bonding with mortar, adhesive or resin.

42,71€

Laost otsas. Tellides tarneaeg nädalat

Velcro-backed sanding discs 125 mm, P240, 5 pcs.

03-55938

Velcro-covered abrasive discs 125 mm, P240, 5 pcs, 55-938 by NEO TOOLS with a diameter of 125 mm and gradation P240. The package contains five discs. Velcro accessories are made of E-paper type. They are characterised by semi-open grain and grain made of electro-corundum. They will be suitable for metal, plastics, wood - both for professional use and for DIY tasks.

1,60€

Laost otsas. Tellides tarneaeg nädalat

SDS Plus reinforced concrete drill bit 14 x 310 mm, quatro

03-54126

The SDS Plus 14 x 310 mm, quatro 54-126 reinforced concrete drill bit by NEO TOOLS is an accessory characterised by a diameter of 12 mm and an overall length of 310 mm and a working length of 240 mm. Equipped with an SDS Plus handle, double helix and QUATRO fork (four cross-set forks), it is ideal for working in reinforced concrete. The cross-cut bit is made of fine-grain carbide. This robust tool from NEO TOOLS is recommended for intensive use by professionals.

8,61€

Laost otsas. Tellides tarneaeg nädalat

Metallipuur kuuskant 3,2 mm, 2 tk

02-54T703

Hex metal drill bit 3.2 mm, 2 pieces 54T703 by GRAPHITE is a set of 2 pieces of drill bits for working with metals. This drill bit features a diameter of 3.2 mm and dimensions - an overall length of 85 mm and a working length of 36 mm. It is DIN 338 compliant and has a tip angle of 118 degrees. GRAPHITE brand drill bits work well in amateur applications.

1,70€

Laost otsas. Tellides tarneaeg nädalat

Lihvkettad 150 mm, P80, 5 tk, 9 avaga, takjakinnitusega

03-08992

Takjakinnitusega lihvkettad on mõeldud kasutamiseks eksentrik- ja orbitaallihvijatega. Kettad läbimõõduga 150 mm ning karedusega P80 sobivad keskmise jämedusega lihvimiseks, vana värvi eemaldamiseks, pindade tasandamiseks ja ettevalmistuseks enne viimistlust. 9 tolmueemaldusava võimaldavad tõhusamat tolmuärastust ning aitavad hoida tööpinna puhtamana. Takjakinnitus tagab kiire ja mugava ketaste vahetuse. Pakendis on 5 lihvketast, mis on mõeldud kasutamiseks mudeliga NEO 04-721.

Tehnilised andmed:

Läbimõõt: 150 mm
Karedus (terasuurus): P80
Kinnitus: takjakinnitus (hook & loop)
Avade arv: 9
Kogus pakendis: 5 tk
Sobib mudelile: NEO 04-721
Tootjakood: 08-992
EAN: 5907558475869

2,19€

Laost otsas. Tellides tarneaeg nädalat

SDS Plus lame meisel 40 × 250 mm, 25°

03-57554

Kinnitus: SDS Plus
Tüüp: lame meisel
Tera nurk: 25°
Tööosa laius: 40 mm
Läbimõõt: 14 mm
Kogupikkus: 250 mm
Kasutusala: betooni ja keraamika töötlemine
Ühilduvus: SDS Plus süsteemiga puurvasarad

Omadused:

25° nurga all olev tööosa tagab efektiivse meiseldamise
Sobib betooni ja keraamiliste plaatide eemaldamiseks
SDS Plus kinnitus kiireks ja kindlaks paigalduseks
Vastupidav konstruktsioon professionaalseks kasutamiseks
Sobib renoveerimis-, lammutus- ja viimistluse ettevalmistustöödeks

4,90€

Laost otsas. Tellides tarneaeg nädalat

Diamond drill hole saw 58G540 52×470mm×5T

03-57858

Diamond hole saw for drill rig 58G540 52 × 450 mm × 5T, 57-858 by NEO TOOLS is a hole saw designed for diamond drill rig with part number 58G540 GRAPHITE. The accessory is characterised by a diameter of 52 mm and a working height of 420 mm and a total height of 470 mm. It has 5T teeth with a height of 10 mm and a 1.1/4 UNC thread. The NEO TOOLS brand hole saw is made of robust steel. It has a seamless tube and laser-welded teeth. It will be indispensable when working with concrete, reinforced concrete, ceramics, granite or asphalt. Recommended for professional use as well as for a variety of DIY tasks.

64,60€

Laost otsas. Tellides tarneaeg nädalat