Sanding cloth 230 x 280 mm, P40, 58T342 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand abrasive canvas is recommended for coarse coating removal.
Half-round, 21 TPI, HSS, 80 mm 57T504 by GRAPHITE is a half-round disc for the multifunction machine, with a working width of 80 mm. It is made from high speed steel (HSS). It has 21 TPI, a thickness of 0.8 mm and a tooth spacing of 1.2 mm, which enables precise right angle cutting. Suitable for cutting wood, wood with nails, metal, plastic and plasterboard. The blade from the GRAPHITE brand proves its worth in renovation and finishing work, providing efficiency and durability.
GRAPHITE's 57T500 Multi-Purpose Saw Blade, Ceramic Cutting with Diamond Embedment, 60mm 57T500 is a blade designed for cutting ceramics, glass, ceramic materials and for removing mortar and grout. The blade is made of diamond embossing, giving it effective cutting of hard materials and increased durability. Recommended for renovation and finishing work.
With a height of 44 mm, GRAPHITE's 64 mm bi-metal hole saw 56T714 allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 135 rpm, Inox steel - 65 rpm, aluminium - 205 rpm, wood - 180 rpm, cast iron - 90 rpm, brass - 180 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Sanding cloth 230 x 280 mm, P150, 58T348 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for smoothing coatings.
Sanding canvas in roll 2.5 m x 115 mm, P120, 58T444 by GRAPHITE is an accessory for sanding metal, wood, plastics and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.
Wood drill bit, extended 12 x 400 mm 54T559 by GRAPHITE is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It is characterised by a diameter of 12 mm and a length of 400 mm. Suitable for tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.
Endless belts 75 x 457 mm, P100, 3 pcs. 58T363 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and an electrocorundum coating. GRAPHITE brand belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.
The sabre saw blade, HCS 152 x 19 x 1.3 mm, 6 TPI, 57T564 by GRAPHITE is a carbon steel (HCS) blade with an overall length of 152 mm, a width of 19 mm and a thickness of 1.3 mm. It has 6 teeth per inch (TPI) and a tooth spacing of 4 mm. Designed for clean curved and plunge cutting of materials such as engineered wood, plywood, plastic (6-100 mm), wood panels (<75 mm), particleboard and MDF (6-60 mm). The GRAPHITE blade design allows for comfortable cutting in workshop work.
Sanding papers 93 x 230 mm, P100, 5 pieces, unperforated 58T258 by GRAPHITE are P100 grade papers suitable for sanding metal, wood and plastics. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures that the paper is sufficiently effective. GRAPHITE sanding papers are offered in a practical set of 5.
HSS metal drills, DIN 338, 5.5 mm, 2 pieces 54T955 by GRAPHITE is a set of 2 metal drills, characterised by a diameter of 5.5 mm, an overall length of 93 mm and a working part length of 57 mm. The drills are made from HSS high speed steel. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 338 and are suitable for every DIY enthusiast.
Velcro sanding discs 125 mm, P60, 5 pieces, with 8 holes 58T289 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Water sandpaper 230 x 280 mm, P320, 58T219 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Velcro sanding discs 150 mm, P180, 5 pieces, with 8 holes 58T281 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 150 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
HSS-G metallipuuride komplekt sisaldab 13 kvaliteetset metallipuuri, mille läbimõõdud jäävad vahemikku 1,5–6,5 mm. Puurid on valmistatud vastupidavast HSS-G kiirlõiketerasest, mis tagab täpse puurimise, hea kulumiskindluse ning pika kasutusea.
Puuridel on silindriline vars ja 118° teritusnurk, mis võimaldab täpset puurimise alustamist ning puhta tulemuse saavutamist. Puurid vastavad standardile DIN 338 ning sobivad ideaalselt nii metallitöödeks töökojas kui ka kodukasutuseks.
Sanding discs, perforated, Velcro with holes 225 mm, P100, 5 pieces 58T273 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
Sanding discs, perforated, Velcro with holes 225 mm, P60, 5 pieces 58T271 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
Pitchfork wood router bits, 6mm shank, set of 12 pcs. 56T613 by GRAPHITE is a set of fork cutters with 6 mm shank, consisting of 12 pieces of different shapes and sizes, for woodworking. The blades are made of tungsten carbide, which ensures the accessories are durable and cut with precision. The GRAPHITE brand cutters are suitable for use with router bits and allow you to cut edges, grooves and make decorative profiles. The set includes cutters with diameters from 6 mm to 31.8 mm and various cutting angles and radii. Each cutter is fitted with a detachable bearing for easy operation and maintenance.
Saw blade, widia, 130 x 30 mm, 24 teeth 57T205 by GRAPHITE, with an external diameter of 130 mm and a mounting hole diameter of 30 mm. It has 24 teeth, the cut width is 1.9 mm and the tooth angle is 15°. The maximum speed is 12,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
Sabre saw blade, HCS, 300 x 19 x 1.3 mm, 6 TPI, set of 2 pieces 58-046 by NEO TOOLS with HCS blade and 6 TPI pitch, features dimensions 300 x 19 x 1.3 mm. The tooth pitch is 4 mm. The blade is designed for straight and rough cuts in wood (6-250 mm), plywood and plastics in the range of 6-250 mm. The NEO TOOLS brand set contains 2 pieces of tools.
